Connect to device ошибка totalbytesperchunk not found set default page spare 2048 64

When faced with — ERROR : — TotalBytesPerChunk Not Found. Set default Page/Spare=2048/64 !!! in MTK droid tools, then consider the following fixes:

  1. Install Busybox
  2. Download MTK droid tools from a different source
  3. Slot in an SD card with sufficient space into the phone
  4. When prompted for Super User permissions on the phone and PC, select Ok or Grant

[Image: image.png]


Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can’t wait.

(This post was last modified: 13-10-2019, 12:30 PM by hovatek.)

https://www.hovatek.com/forum/images/default_avatar.png

Posts: 6
Threads: 1
Joined: Aug 2016

Reputation:
0

(24-08-2015, 09:44 AM)hovatek Wrote:  
[Image: image.png]

When faced with — ERROR : — TotalBytesPerChunk Not Found. Set default Page/Spare=2048/64 !!! in MTK droid tools, then consider the following fixes:

* Install Busybox
* Download MTK droid tools from a different source
* Slot in an SD card with sufficient space into the phone
* When prompted for Super User permissions on the phone and PC, select Ok or Grant

i do all thing all thing working but unable to creat scatter file see attachment my device is fly fs603 with mt6580

Attached Files


.docx

mtk.docx Size: 260.16 KB  Downloads: 92

https://www.hovatek.com/forum/uploads/avatars/avatar_2746.jpg?dateline=1470823289

Posts: 2,289
Threads: 215
Joined: Nov 2014

Reputation:
9

(17-08-2016, 10:42 AM)fromjeet Wrote:  i do all thing all thing working but unable to creat scatter file see attachment my device is fly fs603 with mt6580

Create a new thread so we can focus on this see https://www.hovatek.com/forum/thread-514.html for how to create thread
Also attach a screenshot if possible

https://www.hovatek.com/forum/uploads/avatars/avatar_5364.jpg?dateline=1586859075

Posts: 283
Threads: 49
Joined: Jan 2015

Reputation:
1

(24-08-2015, 09:44 AM)hovatek Wrote:  
[Image: image.png]

When faced with  — ERROR  :  — TotalBytesPerChunk Not Found. Set default Page/Spare=2048/64 !!! in MTK droid tools, then consider the following fixes:

* Install Busybox
* Download MTK droid tools from a different source
* Slot in an SD card with sufficient space into the phone
* When prompted for Super User permissions on the phone and PC, select Ok or Grant

Busy box is installed already on my phone,
i have downloaded mtkdroid from three different sources,
i have sufficient space on my sd card
but when am prompted on pc i am not been prompted on my phone i just see «Shell granted this and that»
it then get disconnected by it self
until i reboot my phone before mtk droid tool could read the phone again

HELP

https://www.hovatek.com/forum/uploads/avatars/avatar_1.png?dateline=1406114058

Posts: 49,473
Threads: 1,451
Joined: Oct 2013

Reputation:
432

(05-08-2017, 06:41 AM)ham_samm Wrote:  Busy box is installed already on my phone,
i have downloaded mtkdroid from three different sources,
i have sufficient space on my sd card
but when am prompted on pc i am not been prompted on my phone i just see «Shell granted this and that»
it then get disconnected by it self
until i reboot my phone before mtk droid tool could read the phone again

HELP

Backup in scatter format using Miracle Box @ https://www.hovatek.com/forum/thread-13347.html


Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can’t wait.

https://www.hovatek.com/forum/uploads/avatars/avatar_5364.jpg?dateline=1586859075

Posts: 283
Threads: 49
Joined: Jan 2015

Reputation:
1

(05-08-2017, 10:15 PM)hovatek Wrote:  

(05-08-2017, 06:41 AM)ham_samm Wrote:  Busy box is installed already on my phone,
i have downloaded mtkdroid from three different sources,
i have sufficient space on my sd card
but when am prompted on pc i am not been prompted on my phone i just see «Shell granted this and that»
it then get disconnected by it self
until i reboot my phone before mtk droid tool could read the phone again

HELP

Backup in scatter format using Miracle Box @ https://www.hovatek.com/forum/thread-13347.html

testing thanks

When faced with — ERROR : — TotalBytesPerChunk Not Found. Set default Page/Spare=2048/64 !!! in MTK droid tools, then consider the following fixes:

  1. Install Busybox
  2. Download MTK droid tools from a different source
  3. Slot in an SD card with sufficient space into the phone
  4. When prompted for Super User permissions on the phone and PC, select Ok or Grant

[Image: image.png]


Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can’t wait.

(This post was last modified: 13-10-2019, 12:30 PM by hovatek.)

https://www.hovatek.com/forum/images/default_avatar.png

Posts: 6
Threads: 1
Joined: Aug 2016

Reputation:
0

(24-08-2015, 09:44 AM)hovatek Wrote:  
[Image: image.png]

When faced with — ERROR : — TotalBytesPerChunk Not Found. Set default Page/Spare=2048/64 !!! in MTK droid tools, then consider the following fixes:

* Install Busybox
* Download MTK droid tools from a different source
* Slot in an SD card with sufficient space into the phone
* When prompted for Super User permissions on the phone and PC, select Ok or Grant

i do all thing all thing working but unable to creat scatter file see attachment my device is fly fs603 with mt6580

Attached Files


.docx

mtk.docx Size: 260.16 KB  Downloads: 92

https://www.hovatek.com/forum/uploads/avatars/avatar_2746.jpg?dateline=1470823289

Posts: 2,289
Threads: 215
Joined: Nov 2014

Reputation:
9

(17-08-2016, 10:42 AM)fromjeet Wrote:  i do all thing all thing working but unable to creat scatter file see attachment my device is fly fs603 with mt6580

Create a new thread so we can focus on this see https://www.hovatek.com/forum/thread-514.html for how to create thread
Also attach a screenshot if possible

https://www.hovatek.com/forum/uploads/avatars/avatar_5364.jpg?dateline=1586859075

Posts: 283
Threads: 49
Joined: Jan 2015

Reputation:
1

(24-08-2015, 09:44 AM)hovatek Wrote:  
[Image: image.png]

When faced with  — ERROR  :  — TotalBytesPerChunk Not Found. Set default Page/Spare=2048/64 !!! in MTK droid tools, then consider the following fixes:

* Install Busybox
* Download MTK droid tools from a different source
* Slot in an SD card with sufficient space into the phone
* When prompted for Super User permissions on the phone and PC, select Ok or Grant

Busy box is installed already on my phone,
i have downloaded mtkdroid from three different sources,
i have sufficient space on my sd card
but when am prompted on pc i am not been prompted on my phone i just see «Shell granted this and that»
it then get disconnected by it self
until i reboot my phone before mtk droid tool could read the phone again

HELP

https://www.hovatek.com/forum/uploads/avatars/avatar_1.png?dateline=1406114058

Posts: 49,280
Threads: 1,347
Joined: Oct 2013

Reputation:
432

(05-08-2017, 06:41 AM)ham_samm Wrote:  Busy box is installed already on my phone,
i have downloaded mtkdroid from three different sources,
i have sufficient space on my sd card
but when am prompted on pc i am not been prompted on my phone i just see «Shell granted this and that»
it then get disconnected by it self
until i reboot my phone before mtk droid tool could read the phone again

HELP

Backup in scatter format using Miracle Box @ https://www.hovatek.com/forum/thread-13347.html


Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can’t wait.

https://www.hovatek.com/forum/uploads/avatars/avatar_5364.jpg?dateline=1586859075

Posts: 283
Threads: 49
Joined: Jan 2015

Reputation:
1

(05-08-2017, 10:15 PM)hovatek Wrote:  

(05-08-2017, 06:41 AM)ham_samm Wrote:  Busy box is installed already on my phone,
i have downloaded mtkdroid from three different sources,
i have sufficient space on my sd card
but when am prompted on pc i am not been prompted on my phone i just see «Shell granted this and that»
it then get disconnected by it self
until i reboot my phone before mtk droid tool could read the phone again

HELP

Backup in scatter format using Miracle Box @ https://www.hovatek.com/forum/thread-13347.html

testing thanks


Просмотр полной версии : Копия iPhone5 mt6575 висит на яблоке


tomash777

09.02.2014, 18:32

клон iphone5 1сим, на обратной стороне платы разъем с microsd 8gb
в recowery входит, но вайпы не помогают
MTK Droid Tools выдает ошибки —
в нормальном режиме
Hardware :
Model : — exec ‘/system/bin/sh’ failed: No such file or directory (2) —
Build number : — exec ‘/system/bin/sh’ failed: No such file or directory (2) —
Build date UTC : 19700101-000000
Android v : — exec ‘/system/bin/sh’ failed: No such file or directory (2) —
Baseband v: — exec ‘/system/bin/sh’ failed: No such file or directory (2) —
Kernel v : — exec ‘/system/bin/sh’ failed: No such file or directory (2) —

лог
—>>> Connect to device <<<—
— ОШИБКА : do not install utils
— ОШИБКА : — TotalBytesPerChunk Not Found. Set default Page/Spare=2048/64 !!!
— Неизвестная структура ROM, бэкап невозможен!

в recovery
лог
— ОШИБКА : — TotalBytesPerChunk Not Found. Set default Page/Spare=2048/64 !!!
— Неизвестная структура ROM, бэкап невозможен!
— ВНИМАНИЕ! Выбранный рекавери не подходит этому телефону!
— Неизвестная структура ROM, бэкап невозможен!

реально его оживить, или у него память умерла?
фото платы


svdoc-pc

10.02.2014, 03:37

Какая нафик память прошивать надо. Бэкап сделайте если из системы не грузит то фул. Лежит какая то прошивка под подобного кита возможно подойдет. В общем ждем фул с вашего трупа


tomash777

10.02.2014, 10:52

чтобы сделать бекап flashool-ом нужно знать картуадреса блоков и иметь scat файл — или я не прав?
MTK Droid Tools делать ничего не хочет.
разжуйте, как с него считать фул


elannav11

10.02.2014, 22:21

Может попробуете считать при помощи этого ската? (см вложения).
Слышал, что адреса МТ6575 и МТ6572 одинаковые.


Знаю что тема старая но всё же думаю инфа кому нибудь пригодится, был не давно такой пациент и с помощью волкано аж два кита сделал. Андроид тул волкано рулит, к счастью оба моих кита виделись как андроид хоть и висели на заставке, сделал рут а потом вайп с помощью андроид тул, формат не помог в обеих случаях


Тоже пришёл айфон 5 точная копия, по узб не видится, киты раз в год попадаются, точки RX ,TX, не нашел, но есть другие SYSRST,SIO,SRST, SCLK, RO, CO, не скинете ссылочку на распин, кабель и способ подключения, плизз. Фото тела прилагаю. Сори за качество фото.


yarikoslav

20.03.2014, 13:24

Тоже пришёл айфон 5 точная копия, по узб не видится, киты раз в год попадаются, точки RX ,TX, не нашел, но есть другие SYSRST,SIO,SRST, SCLK, RO, CO, не скинете ссылочку на распин, кабель и способ подключения, плизз. Фото тела прилагаю. Сори за качество фото.

По USB в разных режимах пробовали подключать? Как себя ведёт пациент?


при подключении к компу показывает зарядку, при нажати на кнопку вкл висит на яблоке и не выключается, только кнопками домой и вкл. Не определяется никак.
О, вроде появилось неизвестное устройство на несколько секунд и пропало….


yarikoslav

20.03.2014, 15:51

На если как обычно на китайцах — без батареи подключить, либо с зажатой какой-то кнопкой громкостихоум?


без батареи, вообще ноль эмоций…. кнопкизажимал по разному, определяется неизвестное устройство, несколько секунд и всё.


Vалерик у меня точно такой же телефон и такая проблема — висит на яблоке. Клиент говорит недавно купил, не ронял. Ты что-нибудь сделал уже с ним?


Said-75 у вас нет случайно scatter файлика для такого телефона как у Vалерика?
P/S/ Vалерик у вас на обратной стороне платы на наклейке что написано? На моей сложно прочесть стерто.


D09 6577 TC…. чет по китайски , потом DL A1 BT , потом С00 !H20131007 1008. как-то так….
А вы свой законнектили к компу, и как? на какие точки?


P/S/ Vалерик у вас на обратной стороне платы на наклейке что написано? На моей сложно прочесть стерто.

2406933]D09 6577 TC…. чет по китайски , потом DL A1 BT , потом С00 !H20131007 1008. как-то так….
А вы свой законнектили к компу, и как? на какие точки?

Извините за повтор….


Ну я взял скаттер который тут выложили и слил бэкап, не уверен, что верно указал адреса конечно. Читал форум чайна-фон. Узнал, что у нас пострадал прелоадер вроде как. Надо прошить через ТП. Сегодня не успел это сделать. Вот почитайте http://forum.china-iphone.ru/post1081393.html?hilit=висит%20на%20яблоке#p1081393


Ну я взял скаттер который тут выложили и слил бэкап, не уверен, что верно указал адреса конечно. Читал форум чайна-фон. Узнал, что у нас пострадал прелоадер вроде как. Надо прошить через ТП. Сегодня не успел это сделать. Вот почитайте http://forum.china-iphone.ru/post1081393.html?hilit=висит%20на%20яблоке#p1081393

А сливал как? с аккумулятором, замкнул тестпойнт и вставил кабель при запущенном флештуле? У меня не видится че-то, мож что не так делаю? Блин инет тупит…


А сливал как? с аккумулятором, замкнул тестпойнт и вставил кабель при запущенном флештуле? У меня не видится че-то, мож что не так делаю? Блин инет тупит…


используй кабель из комплекта телефона. Или на плате есть пятачки D+, D-, gnd Vcc можно подпаяться. Или ориг кабель от 5 айфона попдойдет. Жмешь рид и подключаешь кабель, должен увидеться. Прога SP Flashtool естественно.


Кто может скачать и перезалить на яндексдиск эту прошивку http://www.gsmforum.su/showthread.php?t=96832
заранее премного благодарен
или у кого есть прошивка для FlashTool Phone i5 (MT6575) плата K13D MB V4.0 MD V4.0 скиньте ее здесь или на любой файлообменник


image

MTK Droid Tools errors and solutions
Since Many Android Users complained of getting many errors whenever they tried to backup their rom using mtkdroid tools on PC.

Some of them have neglect the act of backing up ROM especially their stock ROM due to this errors but which backing up of stock up is compulsory because of unforeseeable bricking.

This made us to research for some major errors they normally encountered and how to easily fix this errors without stress.

MAJOR ERRORS & SOLUTIONS:

*ERROR: The device isn’t revealed. Connect or reconnect the cable!

SOLUTION: Ensure to install Mediatek drivers using PdaNet and enable USB debugging on the phone.

*ERROR: file adbd not install

SOLUTION: Exit PdaNet in system tray if open
Close MTK droid tools
Disconnect the phone from PC
Download Busybox apk from the link below

DOWNLOAD BUSYBOX APK

NB: After clicking the download link. To proceed, wait for 5 sec and click SKIP AD at the top right corner of your device screen.”

Install Busybox on the phone and click Open after installation
Wait for initialization to finish (100%)
Still in Busybox, click Install wand wait till you get a prompt saying installation was successful
Re-launch MTK droid tools
Reconnect the phone to PC

If it persists then:
Download ADBD Insecure apk from the link below

DOWNLOAD ADB INSECURE APK

NB: After clicking the download link. To proceed, wait for 5 sec and click SKIP AD at the top right corner of your device screen.”

Install it on the phone and launch
Tick Enable insecure adbd
Re-launch MtK droid tools.

*ERROR: Insufficient space on device

SOLUTION: Ensure there’s at least 4GB free space on both phone storage and SD card (if supported).

*ERROR: Preparation of files for FlashTool is impossible, file isn’t found

SOLUTION: Remove all scatter files in the backup folder except one and rename this last one to MT65??_Android_scatter ( where “??” represents the number for your phone model e.g MT6572_Android_scatter).

*ERROR: Zero file, no space left on device!

SOLUTION: Ensure to have at least 15 GB free on the PC, 4GB free on both SD card and Phone storage.

*ERROR: TotalBytesPerChunk Not Found. Set default Page/Spare=2048/64 !!!

SOLUTION: Slot in an SD card into the phone and install Busybox on the phone
Ensure the phone is an MTK phone
Download MTK Droid Tools froma different source.

*ERROR: ATTENTION! Fake Hardware in kernel or firmware doesn’t correspond to the phone!

SOLUTION: Ignore it. If MTK droid tools still refuses to work then download another copy from a different source.

ERROR: Preparation of files for flash Tool is impossible . file isn’t found: C:.…MT****_Android_scatter.txt

SOLUTION: Either the backup is incomplete (missing scatter file) or the backup contains two scatter files; in which case you should delete one and try again.

*ERROR: SU inaccessible

SOLUTION: Ensure the phone is rooted. After clickking ROOT, click Yes on PC and Grant on phone. Check the super user application on the phone (might vary with rooting technique) to be sure that ADB is granted root permissions.

*ERROR: dev/radio/pttycmd1 inaccessible , should be Root Shell OR pttycmd1 device NOT found!

SOLUTION: Fix Unknown Baseband by flashing a compatible Stock ROM.

*ERROR: During copying files between phone and PC

SOLUTION: Download MTK Droid tools from a different source.

*ERROR: It is impossible to start ADB

SOLUTION: Download MTK Droid tools from a different source.

“Don’t Hesitate To Use The Comment Box”

After weeks of intense leaks and rumours, Samsung has finally albeit quietly lifted the gaze on its latest mid-range offering, the Samsung Galaxy M51 smartphone.

Enough have been said on the success of the Samsung Galaxy A-series lineup and now the company is looking to add some sauce and spice to further make the competition for spaces very much stiff.

Samsung Galaxy M51 launched: A notable upgrade from the M31s? - Full specifications, features and price 10

As a brand new entry in Samsung’s popular Galaxy M series, the Galaxy M51 exists as a higher-placed alternative to the Galaxy M31s , which was launched earlier in July. However, belaying expectations, the Galaxy M51 has only been launched in Germany for now, with news about the global launch still anyone’s guess.

The Galaxy M51 smartphone brings with it several notable improvements appearing to be very much in line with what the leaks had suggested over the past few days, with the biggest selling point of the device being the 7000mAh battery pack, which also supports up to 25W fast charging. A switch to Snapdragon processor has also been muted.

Here’s a complete laydown on everything new with the Samsung Galaxy M51 smartphone.

Samsung Galaxy M51 Specifications and Features

The Samsung Galaxy M51 is anything to go by any Samsung phone with the device sporting a 6.7-inch Super AMOLED display with a centered hole-punch and full HD+ resolution.

Although Samsung’s official listing doesn’t make it clear which processor the phone is using, reports point to the device been powered by the Qualcomm Snapdragon 730 SoC, as previously speculations.

The phone offers a single 6GB of RAM and 128GB of UFS 2.1 storage variant with support for MicroSD card expansion. The smartphone runs on Samsung’s custom OneUI, based on Android 10 operating system.

Samsung Galaxy M51 launched: A notable upgrade from the M31s? - Full specifications, features and price 11

In the camera department, the Galaxy M51 features the same setup as the Galaxy M31s, packing a rear camera 64MP primary sensor, coupled with an f/1.8 lens. Sat next to it is a 12MP ultra-wide-angle lens that brings with itself the promise of 123-degree field-of-view, a 5MP depth sensor, and a 5MP macro camera. For selfies, there is a 32MP lens which remains unchanged from the Galaxy M31s.

However, the insane 7,000 mAh battery is what gives the Galaxy M51 its headline. The 6000 mAh battery fitted on previous Galaxy M series phones was the largest in its segment. Also, Samsung has includey a 25W fast charger inside the box, the same one that comes with the Galaxy M31s and some of Samsung’s recently launched flagships.

Samsung Galaxy M51 launched: A notable upgrade from the M31s? - Full specifications, features and price 12

Other usual connectivity and security features include a side-mounted fingerprint scanner, a USB Type C port, a single bottom-firing speaker, a 3.5mm audio jack, and Bluetooth 5.

Samsung Galaxy M51 Price and Availability

Samsung Galaxy M51 has only been launched in Germany at a starting price of €360 ($429) and can be pre-ordered via Samsung’s German website at the moment. Pre-orders will start shipping out starting September 11.

Samsung hasn’t yet made any announcements regarding when it will bring the device to other markets such, but your guess is as good as ours, we hope to see it launch in the country. The device is available in White and Black colour options.

Samsung Galaxy M51 launched: A notable upgrade from the M31s? - Full specifications, features and price 13

A major competitor to the recently launched OnePlus Nord smartphone? That’s a different post for another day.

Samsung Galaxy M51 Key Specifications

  • Display: 6.7-inch (16.95cm) Super AMOLED & Full HD+
  • SoC: Octa-core processor
  • RAM & Storage: 6GB RAM + 128GB storage
  • Battery & Charging: 7,000 mAh battery
  • Fingerprint sensor: Side-mounted
  • Rear Camera: 64MP, f/1.8 + 12MP ultra-wide, f/2.2 + 5MP depth sensor + 5MP macro sensor
  • Front Camera: 32MP
  • OS: Android 10 with One UI 2.1

  • #1

Добрый день уважаемые мастера, подскажите как и чем создать бэкап с данного аппарата…
Краткая история, принесли ТА висящим на заставке, после безуспешных манипуляций с Infinity CM2, который ругался на заблокированный загрузчик, ТА включился…??? Хотел создать резервную копию МТК дройд, но там ошибка — «Не работает с 64-битными процессорами устройств»

—>>> Connect to device <<<—
— ОШИБКА : — TotalBytesPerChunk Not Found. Set default Page/Spare=2048/64 !!!
— Неизвестная структура ROM, бэкап невозможен!

Вот как быть, и прошивок на него не нашел, и вроде бы как есть с чего слить…

GreyDog

  • #2

В чем суть вопроса?
Слейте фулл крайней версией SPFT, скат любой под ваш проц. Инструкции найдете?

  • #3

Суть в создании копии перед экспериментами над аппаратом, а так как прошивок пока нет в доступе (либо плохо искал) решил сделать бэкап… Спасибо за дельный совет со скат файлом под МТК 6737… PS: Обязательно попробую и этот способ, а пока с подсказки Уважаемого JayDi сливаю Infinity CM2.

  • #4

Выложите Scatter на этот телефон. Надо сделать бэкап системы, а с scatter что нашел в инете выдает ошибку 2022. Может и из-за левого скатера эта ошибка. Хз….

xtramen

  • #5

Выложите Scatter на этот телефон. Надо сделать бэкап системы, а с scatter что нашел в инете выдает ошибку 2022. Может и из-за левого скатера эта ошибка. Хз….

вот, держи

  • 9,9 КБ
    Просмотры: 212

  • #6

lenovo a2016a40 google account

probleym
accaunt

Последнее редактирование модератором: 5/11/21

xtramen

  • #7

загрузить scatter, заменить secro на файл из архива

  • 1,7 КБ
    Просмотры: 129

  • #8

Инструкция как удалить Google аккаунт.

Заряжаем телефон на 100%
Включаем телефон и выбираем в Wi-Fi сети, там уже дополнительно и в любых свободных графах пишем текст и выбираем скопировать.
Выбираем «включить подсказки» и потом зажимаем кнопку домой и выходит Google now, где пишем Chrome и качаем приложение Test+DPC.apk
После этого запускаем приложение проходим по всем пунктам и шифруем телефон, телефон перезагрузится.
Но пускать на рабочий стол он не хочет. Так же запускаем Google Now и пишем «настройки» и в них уже в «О телефоне» 10 раз нажимаем на «номер сборки», после этого заходите в «меню разрабочика» и там включаете «Заводская разблокировка» и после этого производите через меню Сброс настроек.

Всем спасибо, потратил 2 часа но сделал.

Доброй ночи ! — телефон К3 Note К50-T5? пытаюсь сделать ,бэкап через МТК Droid Root v 2.5.3 , на компьютере винда 10, в диспетчере устройств компа

определяется в разделе «переносные устройства» как K3 Note (версия драйвера 10.0.10586.0) , в разделе «устройства USB» -ADB interface (версия драйвера 10.0.10586.0.) Попытка поставить свежие драйвера пишет, что стоят что не наесть самые лучшие с подписью Microsoft

смущает дата 21.06.2006.

Я так понял что мне нужно в режим с «неподписанными драйверами » ?

При попытке сделать бэкап МТК Droid Root , согласно инструкции, жмем кнопку « ROOT» пишет следующее:

>>> Connect to device <<<—
 — ОШИБКА   :  — TotalBytesPerChunk Not Found. Set default Page/Spare=2048/64 !!!
ВНИМАНИЕ! Возможны запросы на экране устройства!
 — ОШИБКА  : SU недоступен

ADB тоже не работает, делаю как в  инструкции http://4pda.ru/forum/index.php?showtopic=487328&st=200#entry26818621

после ввода строки dd if=/dev/nvram of=/sdcard/nvram.img bs=5242880 count=1

получаем вот такую строку.

dd if=/dev/nvram: Permission denied

)) Готов уже убить этот телефон. Который заменили на новый по гарантии –умерла мать теперь (не работает фокус в камере) вот и пытаюсь сделать бэкап, чтобы попробовать прошить.

Спасибо за внимание.

Вспомнил, обновил superSu до Pro походу просто выкинул деньги.

Отредактировал 1 января, 2016 Truby

image

MTK Droid Tools errors and solutions
Since Many Android Users complained of getting many errors whenever they tried to backup their rom using mtkdroid tools on PC.

Some of them have neglect the act of backing up ROM especially their stock ROM due to this errors but which backing up of stock up is compulsory because of unforeseeable bricking.

This made us to research for some major errors they normally encountered and how to easily fix this errors without stress.

MAJOR ERRORS & SOLUTIONS:

*ERROR: The device isn’t revealed. Connect or reconnect the cable!

SOLUTION: Ensure to install Mediatek drivers using PdaNet and enable USB debugging on the phone.

*ERROR: file adbd not install

SOLUTION: Exit PdaNet in system tray if open
Close MTK droid tools
Disconnect the phone from PC
Download Busybox apk from the link below

DOWNLOAD BUSYBOX APK

NB: After clicking the download link. To proceed, wait for 5 sec and click SKIP AD at the top right corner of your device screen.”

Install Busybox on the phone and click Open after installation
Wait for initialization to finish (100%)
Still in Busybox, click Install wand wait till you get a prompt saying installation was successful
Re-launch MTK droid tools
Reconnect the phone to PC

If it persists then:
Download ADBD Insecure apk from the link below

DOWNLOAD ADB INSECURE APK

NB: After clicking the download link. To proceed, wait for 5 sec and click SKIP AD at the top right corner of your device screen.”

Install it on the phone and launch
Tick Enable insecure adbd
Re-launch MtK droid tools.

*ERROR: Insufficient space on device

SOLUTION: Ensure there’s at least 4GB free space on both phone storage and SD card (if supported).

*ERROR: Preparation of files for FlashTool is impossible, file isn’t found

SOLUTION: Remove all scatter files in the backup folder except one and rename this last one to MT65??_Android_scatter ( where “??” represents the number for your phone model e.g MT6572_Android_scatter).

*ERROR: Zero file, no space left on device!

SOLUTION: Ensure to have at least 15 GB free on the PC, 4GB free on both SD card and Phone storage.

*ERROR: TotalBytesPerChunk Not Found. Set default Page/Spare=2048/64 !!!

SOLUTION: Slot in an SD card into the phone and install Busybox on the phone
Ensure the phone is an MTK phone
Download MTK Droid Tools froma different source.

*ERROR: ATTENTION! Fake Hardware in kernel or firmware doesn’t correspond to the phone!

SOLUTION: Ignore it. If MTK droid tools still refuses to work then download another copy from a different source.

ERROR: Preparation of files for flash Tool is impossible . file isn’t found: C:.…MT****_Android_scatter.txt

SOLUTION: Either the backup is incomplete (missing scatter file) or the backup contains two scatter files; in which case you should delete one and try again.

*ERROR: SU inaccessible

SOLUTION: Ensure the phone is rooted. After clickking ROOT, click Yes on PC and Grant on phone. Check the super user application on the phone (might vary with rooting technique) to be sure that ADB is granted root permissions.

*ERROR: dev/radio/pttycmd1 inaccessible , should be Root Shell OR pttycmd1 device NOT found!

SOLUTION: Fix Unknown Baseband by flashing a compatible Stock ROM.

*ERROR: During copying files between phone and PC

SOLUTION: Download MTK Droid tools from a different source.

*ERROR: It is impossible to start ADB

SOLUTION: Download MTK Droid tools from a different source.

“Don’t Hesitate To Use The Comment Box”


  • #1

Добрый день уважаемые мастера, подскажите как и чем создать бэкап с данного аппарата…
Краткая история, принесли ТА висящим на заставке, после безуспешных манипуляций с Infinity CM2, который ругался на заблокированный загрузчик, ТА включился…??? Хотел создать резервную копию МТК дройд, но там ошибка — «Не работает с 64-битными процессорами устройств»

—>>> Connect to device <<<—
— ОШИБКА : — TotalBytesPerChunk Not Found. Set default Page/Spare=2048/64 !!!
— Неизвестная структура ROM, бэкап невозможен!

Вот как быть, и прошивок на него не нашел, и вроде бы как есть с чего слить…

GreyDog


  • #2

В чем суть вопроса?
Слейте фулл крайней версией SPFT, скат любой под ваш проц. Инструкции найдете? :)


  • #3

Суть в создании копии перед экспериментами над аппаратом, а так как прошивок пока нет в доступе (либо плохо искал) решил сделать бэкап… Спасибо за дельный совет со скат файлом под МТК 6737… PS: Обязательно попробую и этот способ, а пока с подсказки Уважаемого JayDi сливаю Infinity CM2.


  • #4

Выложите Scatter на этот телефон. Надо сделать бэкап системы, а с scatter что нашел в инете выдает ошибку 2022. Может и из-за левого скатера эта ошибка. Хз….

xtramen


  • #5

Выложите Scatter на этот телефон. Надо сделать бэкап системы, а с scatter что нашел в инете выдает ошибку 2022. Может и из-за левого скатера эта ошибка. Хз….

вот, держи

  • 9,9 КБ
    Просмотры: 212


  • #6

lenovo a2016a40 google account

probleym
accaunt

Последнее редактирование модератором: 5/11/21

xtramen


  • #7

загрузить scatter, заменить secro на файл из архива

  • 1,7 КБ
    Просмотры: 129


  • #8

Инструкция как удалить Google аккаунт.

Заряжаем телефон на 100%
Включаем телефон и выбираем в Wi-Fi сети, там уже дополнительно и в любых свободных графах пишем текст и выбираем скопировать.
Выбираем «включить подсказки» и потом зажимаем кнопку домой и выходит Google now, где пишем Chrome и качаем приложение Test+DPC.apk
После этого запускаем приложение проходим по всем пунктам и шифруем телефон, телефон перезагрузится.
Но пускать на рабочий стол он не хочет. Так же запускаем Google Now и пишем «настройки» и в них уже в «О телефоне» 10 раз нажимаем на «номер сборки», после этого заходите в «меню разрабочика» и там включаете «Заводская разблокировка» и после этого производите через меню Сброс настроек.

Всем спасибо, потратил 2 часа но сделал.

  • Connect manager ошибка 1053
  • Connect manager assistant for playstation ошибка
  • Conio h c ошибка
  • Conhost exe ошибка приложения 0xc000012d
  • Confirm overwriting 3ds max ошибка