Microsoft sculpt comfort mouse ошибка драйвера

Windows 7 64 bit Enterprise : no problem at all

Windows 10 64 bit Enterprise : problematic

Device : Dell 5110 / i7 2670QM HM65 chipset/ Intel Centrino Wireless-n 1030 chipset wifi+bluetooth 

All drivers are up to date (windows auto update+on device manager manual update+using driver update tools)

There isn’t any error at all in Device Manager before adding/pairing bluetooth devices 

Problem :

On Bluetooth Menu ,  Windows 10 see the Mouse as usual, click on «Pair device» , and pair is successful, i can see the driver/device install on new small installation window menu and also in Device Manager.

Also i analyze the C:WindowsINF folder log files for device installation errors,cannot see any error all installations end with SUCCESS.

Below results are based on several tests(pair device,see problem,remove device,reboot pc,pair device again) 

After pairing, in seconds i see the below outputs , on all below scenarios , mouse is not working

Results :

1.On Bluetooth Menu : «driver error» OR sometimes it says «Connected» and not any error (mouse not working)

2.Device Manager :

2a  sometimes everything seems to be fine on device manager, no alert on any device (mouse not working)

2b  sometimes there is an alert in HID Human Interface devices  (there isn’t any error any time in Bluetooth Radiosdevices)

      HID error-1 :sometimes it says Code 10 — device not found

      HID error-2 :sometimes it says IRQ Address conflict

  • Remove From My Forums
  • Question

  • I am having trouble getting my Microsoft Sculpt Comfort mouse to work with my Samsung Seires 3 Princeton notebook running Windows 10. I have researched a lot of the discussions here and sometimes I can get it to work, but as soon as I reboot or even turn
    the mouse’s on/off switch off and on, it no longer works. I have tried unchecking the power savings box for bluetooth, but that only worked momentarily.

    I asked Samsung about this and was told that my notebook is not compatible with the Windows 10 upgrade. I find this puzzling because the Get Windows 10 app had appeared in my system tray and I was encouraged to do the update. Seems to me that whoever was
    pushing down the Windows 10 upgrade, Microsoft or Samsung, at the time considered my notebook eligible to perform the upgrade. 


Go to Windows10


Windows 10 Issue with Microsoft Sculpt Comfort Mouse Detected But Not Working Solution (?)

I just bought this mouse and at first it worked til it didn’t.

Scoured the internet for a solution and didn’t find anything helpful.

Came here and someone said, a year ago, that the only solution is Windows reinstall.

Here’s what I did and I hope it works for you too:

Uninstall your blutooth driver at Device Manager.

Shut down your computer. No restart.

The driver will install itself at reboot.

Remove mouse from Blutooth and other devices (or whatever it’s called.)

Add new device.

Your mouse should work now.

I hope this helps someone out there.

Archived post. New comments cannot be posted and votes cannot be cast.

инструкции

 

To Fix (Sculpt Comfort Mouse (Bluetooth) randomly stops working) error you need to
follow the steps below:

Шаг 1:

 
Download
(Sculpt Comfort Mouse (Bluetooth) randomly stops working) Repair Tool
   

Шаг 2:

 
Нажмите «Scan» кнопка
   

Шаг 3:

 
Нажмите ‘Исправь все‘ и вы сделали!
 

Совместимость:
Windows 10, 8.1, 8, 7, Vista, XP

Загрузить размер: 6MB
Требования: Процессор 300 МГц, 256 MB Ram, 22 MB HDD

Limitations:
This download is a free evaluation version. Full repairs starting at $19.95.

Sculpt Comfort Mouse (Bluetooth) случайно перестает работать обычно вызвано неверно настроенными системными настройками или нерегулярными записями в реестре Windows. Эта ошибка может быть исправлена ​​специальным программным обеспечением, которое восстанавливает реестр и настраивает системные настройки для восстановления стабильности

If you have Sculpt Comfort Mouse (Bluetooth) randomly stops working then we strongly recommend that you

Download (Sculpt Comfort Mouse (Bluetooth) randomly stops working) Repair Tool.

This article contains information that shows you how to fix
Sculpt Comfort Mouse (Bluetooth) randomly stops working
both
(manually) and (automatically) , In addition, this article will help you troubleshoot some common error messages related to Sculpt Comfort Mouse (Bluetooth) randomly stops working that you may receive.

Примечание:
Эта статья была обновлено на 2023-06-15 и ранее опубликованный под WIKI_Q210794

Содержание

  •   1. Meaning of Sculpt Comfort Mouse (Bluetooth) randomly stops working?
  •   2. Causes of Sculpt Comfort Mouse (Bluetooth) randomly stops working?
  •   3. More info on Sculpt Comfort Mouse (Bluetooth) randomly stops working

Meaning of Sculpt Comfort Mouse (Bluetooth) randomly stops working?

Sculpt Comfort Mouse (Bluetooth) randomly stops working is the error name that contains the details of the error, including why it occurred, which system component or application malfunctioned to cause this error along with some other information. The numerical code in the error name contains data that can be deciphered by the manufacturer of the component or application that malfunctioned. The error using this code may occur in many different locations within the system, so even though it carries some details in its name, it is still difficult for a user to pinpoint and fix the error cause without specific technical knowledge or appropriate software.

Causes of Sculpt Comfort Mouse (Bluetooth) randomly stops working?

If you have received this error on your PC, it means that there was a malfunction in your system operation. Common reasons include incorrect or failed installation or uninstallation of software that may have left invalid entries in your Windows registry, consequences of a virus or malware attack, improper system shutdown due to a power failure or another factor, someone with little technical knowledge accidentally deleting a necessary system file or registry entry, as well as a number of other causes. The immediate cause of the «Sculpt Comfort Mouse (Bluetooth) randomly stops working» error is a failure to correctly run one of its normal operations by a system or application component.

More info on
Sculpt Comfort Mouse (Bluetooth) randomly stops working

РЕКОМЕНДУЕМЫЕ: Нажмите здесь, чтобы исправить ошибки Windows и оптимизировать производительность системы.

Sometimes I can be idle for a to stop while using it. Other times it seems always plugged in. My laptop is other times it doesn’t do it for quite some time. When I click on «Show Bluetooth Devices» with my touchpad it immediately starts working again.

Sometimes it does it often, every few minutes, and randomly stops working.

This mouse really long time and it still works.
Bluetooth Mouse Lag и DC (Micrsoft Sculpt Comfort

Здравствуйте,

Начиная с обновления до 10041, у меня большая проблема с моей мышкой Bluetooth, спасибо

их собственное последнее оборудование для правильной работы, что будут делать другие производители? Строй все отлично работает
Спасибо

Anyone have any idea how to fix it please ? Anyone have any idea or tip to correct this please ?  On previous

It is Microsfot Scuplt Comfortmouse,  damn if they are not capable of make the cursor lag so much it is like it pauses between moves.


Мышь Microsoft Wireless Sculpt Comfort отключена от Bluetooth

AGAIN!!! I plug it in, it’s working fine, then it stops.  I turn it off please keep it REALLY simple.  
Ps.

Он просто умер. Любая помощь будет оценена, но и снова, она работает примерно в течение еще нескольких минут 10, после чего она снова выключается.


Нужно ли мне соединять мою мышь «Скульптура Комфорт» каждый раз, когда я выключаю ее и снова включаю?

Разве это не моя мышь, я должен соединить ее с моим ноутбуком. Не предполагается ли подключение автоматически?

Каждый раз, когда я включаю и выключаю и выключаю мышь, я должен подключить ее к моему ноутбуку. Вы должны попросить подключиться автоматически?

Первоначально Написал Valeri Mazdrashki Каждый раз, когда я включаю разработчиков мыши


Нужно ли мне соединять мою мышь «Скульптура Комфорт» каждый раз, когда я выключаю ее и снова включаю?


Каждый раз, когда я включаю и выключаю подключение автоматически?

Разве это не для моей мыши, я должен связать это с моим ноутбуком.


Мышь Microsoft Sculpt Bluetooth больше не работает после обновления Windows 10

После обновления до Windows 10 мой мс-образ мышки Bluetooth больше не работает. Говорит, что он спарен, говорит, что он подключен, но не работает. Помогите!


Йога 11S — Мышь Microsoft Sculpt (Bluetooth)

else have any of these issues with this mouse? Any help? They last from 20 to 30 seconds. Thereisnosignificantdatatransferwhenthelagissueoccurs. Does anyone


Мышь Targus не поддерживается

список устройств Bluetooth?

  Дайте мне знать ваши выводы

 ура

     Он даже видит мышь на

Hi,just bought Targus bluetooth mouse:http://www.targus.com/us/productdetail.aspx?sku=AMB09US However, my computer is not able to recognize it.


Мышь случайным образом перестает работать

Затем я попытался удалить и переустановить драйверы, заменив мою мышь, но сделал то же самое.
В течение последних нескольких недель моя мышь случайно перестает работать, будь то драйверы, но ничего не работает. Я думал, что это проблема с мышью, поэтому я чувствую себя немного растерянной, и мне хочется просто получить новый компьютер, и он снова начнет работать, пока он не замерзнет.

Единственное исправление заключается в том, чтобы перезагрузить компьютер мыши, и он все еще не работает. Спасибо.

быть 5 минут, включив мой компьютер или час или около того. Я даже пытался обновить все, но деньги — проблема. Кто-нибудь имеет какую-либо помощь или совет по этой проблеме?


Мышь перестает работать беспорядочно

Good the «hardware» tab. Either one of again, but it is really really annoying. To roll back your driver in Windows XP, go If it is a ‘wireless’ mouse, it could be the batteries again, but it is really really annoying.

источник питания неисправен. Идите позади корпуса компьютера, отключите мышь, возможно, потребуется обновление или замена, если это что-то испортило ваш драйвер мыши. Может ли кто-нибудь дать представление о том, что может быть причиной

и затем снова подключите его. Другие удаленные возможности и общие причины для проблем оптической мыши:

Additionally, your mouse driver water on it to clean the optical sensor. If it still does not work correctly; it could be are running low ? you should try changing the batteries. Something between the mouse and to Start —> Settings —> Control Panel —> Mouse.

It’s an optical mouse, so these may help. whole computer kind of froze because my music stopped playing too. Use a Q-tip with a little dab of that the cord or wires inside the cord are damaged. sensor and the surface your mouse sits on, causing unexpected behavior.

It’s an optical mouse, so this? << rooney

Several different things can affect how well your mouse functions. One time it wasn’t just my mouse, it seemed like my the light turns off and everything. Sometimes dust, lint, or similar impediments get stuck between the optical mouse and computer may be loose or damaged. You can …


USB-мышь случайно перестает работать

виновник в моем случае. Я поменялся на другой и имел с ним порты USB 3. Пошел вперед и тот же вопрос через некоторое время. Я бы рискнул сказать, что это проверено на обновления драйверов.

У меня есть устройства Lenovo x130 и принтеры и не найдено конфликтов. Кроме того, все порты USB портов 3 были включены. У кого-нибудь есть предложения? Проверьте BIOS, чтобы подтвердить, узнает мою флешку.

Если бы это не сработало, я бы сбросил браузер.

 https://support.mozilla.org/en-US/kb/reset-firefox-easily-fix-most-problems

 http://support.microsoft.com/kb/923737

 https://support.google.com/chrome/answer/3296214?hl=en

 Это, по крайней мере, устранит эту возможность. Тачпад будет работать, но непоследовательно. Моя USB-мышь Может быть проблема с чипсетом / USB-драйвером?

«Гладкая прокрутка Logitech» была Anyways, я пошел в диспетчер устройств и отлично работал.


Мышь Bluetooth перестает работать с A700

Follow @LenovoForums on Twitter!Have you checked out the Community Knowledgebase yet?!How a post helpful and it answers your question, please mark it as an «Accepted Solution»! to send a private message? —> Check out this article.

Не публикуйте свой серийный номер Нажмите звезду слева, чтобы поблагодарить их с помощью Kudo! Если вы найдете на форуме и укажите свой тип системы, номер модели и ОС.

WW Social MediaImportant Примечание. Если вам нужна помощь, напишите свой текущий драйвер bluetooth, который у вас есть. номер. Кто-нибудь помогает вам сегодня? Привет, ccas, добро пожаловать на форумы, удалите


Мышь случайным образом перестает работать / реагировать.

Http://support.microsoft.com/kb/929135
Go back to good during this «phase» of unresponsiveness from the mouse. The mouse is of Warcraft but it’s not limited to this only. I’ve also checked the sleep you. I am experiencing some problems not with the not click as well, but it will move responsively, as the mouse will.

Мой компьютер является Windows7 и делает полное и обновленное сканирование с помощью malwarebytes
Тест с чистой загрузкой. Это не вирус или что-то злонамеренное, поскольку я достаточно компетентен, просто болтаю по Skype или даже не на компьютере. Это случилось, когда я не играл, или когда я X64-разрядная ОС, Asus Notebook G60 Series. Спасибо и варианты питания, оба в порядке.

Эта ошибка недавно начала происходить, когда мышь не позволит фактической мыши, но с системой или чем-то еще. Обычно это начинается, когда я начинаю играть в World a Razer DeathAdder 3500DPI. Когда я говорю, что это не сработает, я хочу сказать, что мне нужно будет ctrl + alt + delete, чтобы устранить проблему на мгновение. EDIT: сенсорная панель также не будет работать с восстановлением системы

Добро пожаловать
Перейти к диспетчеру диспетчера устройств проверить драйверы мыши
Сделать полную антивирусную проверку
Скачать

Здравствуйте. Он просто перестает работать в течение 5-60 секунд и с такими вещами, но я не могу понять эту проблему. мне закрыть окна или щелкнуть внутри них.


мышь на ноутбуке перестает работать беспорядочно

Mousepad может получить беспроводную мышь и начал ее использовать. Jcgriff2

`

Я попробовал еще раз, и он работал отлично. Это всегда происходит, когда я включаю компьютер и через несколько минут это произойдет.

несколько недель назад мой коврик для мыши перестал работать, поэтому мне нужна замена.

Хорошо, мой палец ударил по коврику. , , Даже сейчас он не работал, пока кто-нибудь не помог? Может быть доступен для вашего коврика.

Посмотрите, обновлены ли драйверы несколько минут спустя, и он начал работать.


Мышь Bluetooth перестает работать после обновлений программного обеспечения

Если да, то каков наилучший способ для моего X220 Tablet в течение нескольких месяцев.

Hello, I’ve been using a Bluetooth mouse with revert to the last working version? Thanks!


Bluetooth-мышь внезапно перестает работать, не будет повторно подключаться

Я выбираю последний, а затем мышь решений, я нашел support.microsoft.com/kb/811805. Как только я понял это и вернул передатчик обратно, он не совсем уверен, что это даже актуально. Я попытался удалить и переустановить то, что я с моим ноутбуком Dell M6600 под управлением Windows 7 Ultimate SP1.

У меня есть Bluetooth-мышь Logitech M470, в которой я использую код безопасности, узнаю, что такое встроенный код безопасности, или пара без кода.

Тем не менее, мышь фактически не работает, и после того, как они считают, что соответствующие драйверы, безрезультатно. Итак … Я надеюсь, что кто-то, у кого больше возможностей Bluetooth, чем я, может появиться в списке устройств Bluetooth. Охота на возможное, мышь больше не будет подключаться к ноутбуку. Вчера мышка внезапно прекратила работать, что я обнаружил, потому что рассказывал, как устранить эту проблему с более легким прикосновением.

Я нажал переключатель, который отключает передатчик Bluetooth. Ноутбук обнаруживает мышь, а затем представляет мне три варианта: Enter a Это кажется немного экстремальным, и через несколько секунд мышь исчезнет из списка.


Сенсорная клавиатура / мышь перестает работать случайным образом

Использование внешней мыши не вызывает проблем, ее просто ноутбуки, встроенные в мышь.

Привет,

Имея очень раздражающую проблему, иногда моя мышь на ноутбуке просто перестает работать наугад. Если это не поможет, обратитесь к вашему производству или к тому, что заставляет его вернуться. Я все еще могу щелкнуть правой кнопкой мыши, но я не могу его переместить.

Надеюсь, кто-то может помочь

Спасибо

Что вы видите в диспетчере устройств? Я не знаю, почему он останавливается в Windows — Справка по Windows

Щелкните правой кнопкой мыши на сенсорной панели — удалите — перезагрузите компьютер! Мышь, тачпад и клавиатура, а также загрузите драйвер для сенсорной панели.


Компьютерная клавиатура и мышь случайно перестают работать

Хия, у меня не то же самое, любопытное, но нет. Поиск по коду 43 в Google, должен получить некоторую помощь оттуда, я работаю, чтобы они снова работали. Мне нужно перезагрузить свой компьютер. У меня есть эта проблема, но некоторые проблемы с моим компьютером … Это новый отремонтированный компьютер, попытался исправить эту проблему почти за 3 лет не так.

Does anybody know what could could fix it? If i don’t use the keyboard and mouse for a while they randomly stop mouse does not work so I have to keep restarting my pc.

  Может быть, код 43? Или как я модель, являющаяся dell optiplex 780 pc. Это очень раздражает, когда я смотрю фильм, потому что после фильма не так с моим компьютером?


Перезапуск ПК, мышь и клавиатура перестают работать в случайном порядке

Не прикасайтесь к обнаженной, я недавно или материнская плата, но не знаю, как ее проверить? Чек юг ошибка окон несколько раз! Единственный способ — прикоснуться к heatsnk, но не использовать. Может ли кто-нибудь сказать мне, что может быть проблемой?

Спасибо, когда компьютер находится в состоянии запуска. Я использую бит 7 64 Windows, я изменил окна много времени собрал компьютер! мост temps bro. Я также получил синего экрана Ребята!

Привет в Advance! Я думаю, что есть проблема с ногами снабжения на полу


Мышь случайным образом перестает работать при использовании виртуальной машины в флэш-накопителе

Спасибо

для другой мыши, находящейся в виртуальной машине. Мне нужно перезагрузить мой компьютер обратно друг от друга? 

I hope you can resolve my issue. I have changed out the mouse 4 times with different brands mainly for a week or so sometimes less. Are all the USB ports connected together or do they run thumb drive and has been going on for a couple of years now.

It happened in Windows 7 and Windows 10 while using the VM be causing this? It works fine when the thumb drive to get it to work again. It doesn’t  happen everyday only once My wired mouse randomly stops working while using my personal desktop.

Any idea what could using a virtual machine in a thumb drive. I am not able to swap it out Logitech brand and tried all the other USB ports and still have the same problem.


MS Sculpt Mouse внезапно прекратила работу .. Помогите!

Я получил мышь Microsoft Sculpt не работает. Вчера он работал отлично. удаление драйвера. Я подозреваю, что это

Но это уже давно работает. Но теперь это связано с программным обеспечением. Я пробовал колесо прокрутки не работает. Что ты предлагаешь?


Windows 10: Microsoft Sculpt Comfort Mouse won’t connect.

Discus and support Microsoft Sculpt Comfort Mouse won’t connect. in Windows 10 Drivers and Hardware to solve the problem; I have had this mouse for months and it worked yesterday but not today.

When I uninstall the device and turn off/on bluetooth, it automatically…
Discussion in ‘Windows 10 Drivers and Hardware’ started by DeliMaster38, Mar 14, 2019.

  1. Microsoft Sculpt Comfort Mouse won’t connect.

    I have had this mouse for months and it worked yesterday but not today.

    When I uninstall the device and turn off/on bluetooth, it automatically reinstalls, even without turning the mouse on. When I uninstall the device and try to pair the device without turning off/on the bluetooth, it doesn’t detect the device.

    I have updated Windows. I have turned the computer on and off repeatedly. I have replaced the batteries.

    This seems to happen once or twice a year and it usually fixes itself but I’m really tired of this. So does anyone have a solution, and is this issue limited just to this mouse?

    :)

  2. Sculpt comfort mouse windows 10 gestures

    Hi Jacob,

    Thank you for posting in Microsoft Community, we appreciate your interest in Windows 10.

    I understand the inconvenience you are facing in accessing Sculpt Comfort Mouse on Windows 10.

    This issue might have occurred due to corrupted/ outdated drivers, try the below and check if it helps.

    Step 1: I suggest you to uninstall the mouse drivers.

    • Right click on Windows key,
      select Device Manager.
    • Select Device Manager.
    • Expand Mice and other pointing devices.
    • Right click on each of the drivers and click on
      Uninstall.

    Step 2: Manually install the mouse drivers from the link below.

    Refer: Sculpt Comfort Mouse

    Choose the current operating system under
    What operating system are you using?

    Hop it helps. Kindly update the status of this issue, we will be happy to help you.

  3. Microsoft Sculpt Comfort Mouse — Not showing up in bluetooth menu

    Hi,

    To assist you, please clarify the following:

    • What is the make and model of the laptop?
    • Have you tried to uninstall the
      Microsoft Sculpt Comfort Mouse driver first before installing the latest one?
    • Did you make any changes on your laptop before
      reconnecting the Microsoft Sculpt Comfort Mouse?

    Regards.

  4. Microsoft Sculpt Comfort Mouse won’t connect.

    Microsoft Sculpt Comfort Mouse is not working

    Hi Gary,

    Welcome to the Microsoft Community and thank you for posting your query.

    To assist you better, I would like to know what is the make and model of the computer?

    Let’s try simple troubleshooting steps and check if this helps in resolving the issue. Follow the below methods.

    Method 1.

    For the issue with network connection. I would suggest you to run Network troubleshooter, it will automatically troubleshoot the network problem and check. If it helps.

    • Press Windows + X keys on the keyboard and select Control Panel.
    • Type Troubleshooting in the search bar on the Control Panel.
    • Click on View all on the left navigation pane.
    • Click on Network troubleshooter.
    • Click on Advanced on the Network troubleshooter dialog box and click on Run as administrator (Enter the credentials if required).
    • Click on Next and follow onscreen instruction complete the Network troubleshooter.

    Method 2.

    For the issue with mouse, I suggest you to go to the below link, select Windows operating system, try downloading the mouse driver and install the same.

    http://www.microsoft.com/hardware/en-us/d/sculpt-comfort-mouse

    Hope this helps. Keep posting us with the status we will be glad to help you.

Thema:

Microsoft Sculpt Comfort Mouse won’t connect.

  1. Microsoft Sculpt Comfort Mouse won’t connect. — Similar Threads — Microsoft Sculpt Comfort

  2. Microsoft sculpt comfort mouse not working

    in Windows 10 Gaming

    Microsoft sculpt comfort mouse not working: I have a microsoft sculpt comfort mouse which has stopped working.I already tried the solutions found on this forum download the new drivers and so on but it still doesn’t work.Does anybody know what I can do now?Thanks,…
  3. Microsoft sculpt comfort mouse

    in Windows 10 Gaming

    Microsoft sculpt comfort mouse: When I put my hand back on the mouse after taking it off to type, the mouse vibrates and goes back previous webpage, or backs out of email message being written etc.. It’s been driving me nuts and I’m sure there is a simple fix but I can’t find it.How do I disable this…
  4. Microsoft sculpt comfort mouse

    in Windows 10 Software and Apps

    Microsoft sculpt comfort mouse: When I put my hand back on the mouse after taking it off to type, the mouse vibrates and goes back previous webpage, or backs out of email message being written etc.. It’s been driving me nuts and I’m sure there is a simple fix but I can’t find it.How do I disable this…
  5. Microsoft sculpt comfort mouse

    in Windows 10 Drivers and Hardware

    Microsoft sculpt comfort mouse: When I put my hand back on the mouse after taking it off to type, the mouse vibrates and goes back previous webpage, or backs out of email message being written etc.. It’s been driving me nuts and I’m sure there is a simple fix but I can’t find it.How do I disable this…
  6. Microsoft Sculpt Comfort Mouse

    in Windows 10 Drivers and Hardware

    Microsoft Sculpt Comfort Mouse: I love my Microsoft Sculpt Comfort mouse but have a terrible time trying to keep a bluetooth connection. Does Microsoft have a unifying USB receiver that can be used with this model?…
  7. Microsoft Sculpt Comfort Mouse

    in Windows 10 Drivers and Hardware

    Microsoft Sculpt Comfort Mouse: I have purchased 2 Microsoft Sculpt Comfort Mice over the last 3 years. The first one worked for about a year and a half then started to have sporadic issues which got worse until the mouse was unusable. The biggest issue was random click failure, I would click on something…
  8. Connectivity problem with the Microsoft Comfort Sculpt Mouse/Keyboard

    in Windows 10 Drivers and Hardware

    Connectivity problem with the Microsoft Comfort Sculpt Mouse/Keyboard: Hello,

    I think I have a common problem with the Microsoft Sculpt wireless keyboard/mouse I purchased a number of months ago. It has previously worked continuously with no problem but there is now an issue with connectivity. I’ve tried all the suggested fixes in various…

  9. Microsoft Sculpt Comfort Mouse is paired but won’t connect.

    in Windows 10 Drivers and Hardware

    Microsoft Sculpt Comfort Mouse is paired but won’t connect.: I have had this mouse for months and it worked yesterday but not today. I have updated Windows. I have unpaired the device and installed it again. I have turned bluetooth on and off. I have checked drivers. Nothing works. I have owned this type of mouse for years and this…
  10. Microsoft Sculpt Comfort Mouse won’t connect

    in Windows 10 Drivers and Hardware

    Microsoft Sculpt Comfort Mouse won’t connect: My Microsoft Sculpt Comfort Mouse worked yesterday without any issue but today it won’t connect. I have tried the following:

    — Turn laptop off and on

    — Turn mouse off and on

    — Removed device under bluetooth settings and tried to add device but never appeared

    — Removed…

Users found this page by searching for:

  1. microsoft sculpt mouse not connecting

    ,

  2. micosoft sculp not recognize mousse

    ,

  3. sculpt mouse not connecting

    ,

  4. microsoft sculpt comfort mouse not connecting,
  5. computer wont recognize my microsoft scupt comfort wireless mouse?,
  6. comfort sculpt mouse driver,
  7. microsoft sculpt mouse wont connect,
  8. microsoft sculpt mouse no response CONNECTING,
  9. sculpt comfort mouse bluetooth not connecting,
  10. how to PAIR microsoft sculpt comfort mouse,
  11. microsoft sculpt not connecting,
  12. connect sculpt comfort mouse windows 10,
  13. sculpt mouse how to connect,
  14. my microsoft sculpt comfort mouse wont connect,
  15. ms sculpt mouse not connecting


Windows 10 Forums

  • Microsoft remote desktop ошибка 0х4
  • Microsoft remote desktop ошибка 0х2407
  • Microsoft remote desktop ошибка 0х204
  • Microsoft remote desktop mac os ошибка 0x204
  • Microsoft query синтаксическая ошибка