An error code is received when trying to download software to the microSD card on Nintendo Switch.
It is possible that the microSD card worked on the console before, but now an error code is displayed.
Additional Information:
If a microSD card is inserted on the console, the save location will default to the microSD card when downloading or redownloading software.
What to Do:
-
Power off the console and remove the microSD card.
-
Verify that the microSD card is compatible with Nintendo Switch.
-
If the microSD card is not supported, replacing it with a supported type may resolve the problem.
The following types of microSD cards are supported on Nintendo Switch:
-
microSD (up to 2 GB)
-
microSDHC (4 GB — 32 GB)
-
microSDXC (64 GB and above)
In order to use a microSDXC card on the Nintendo Switch console, a system update is required.
In order to improve your gameplay experience, using a microSD card with a higher transfer speed is recommended.
High-speed microSD card guidelines:
-
UHS-I (Ultra High Speed Phase I) compatible
-
Transfer speed 60 — 95 MB/sec (the higher the transfer speed, the better gameplay experience on Nintendo Switch)
-
-
Reinsert the microSD card and perform a system update.
-
The system menu version may not necessarily change after this update.
-
-
If the microSD card cannot be read on Nintendo Switch, try the following:
-
Format the microSD card.
-
Once formatted, the information on the microSD card cannot be recovered. If screenshots or videos are stored on the microSD card, be sure to first back up the information on a computer.
-
If downloadable software was saved to the microSD card, it can be redownloaded using the same Nintendo Account where it was purchased.
-
-
Use a different microSD card.
-
Remove the microSD card and download directly to the system memory.
-
Situation Not Resolved:
If the error persists with multiple microSD cards, then the Nintendo Switch console will need to be repaired.
-
For testing purposes, be sure to include one or more of the problematic microSD cards that were being used with the console.
If the error persists and a microSD card is not being used, then the Nintendo Switch console will need to be repaired.
If you would like further assistance with the Nintendo Switch console, please contact Nintendo Customer Service.
Hi everybody, I’m at a loss here. I know there are a handful of posts with this topic, but I have yet to encounter a solution for this one specifically. I just purchased a new microSD card to upgrade my current 64 GB Sandisk Ultra. I purchased a 128GB Sandisk Ultra Plus for a great price from Best Buy, and followed the steps on the Nintendo support website.
Upon putting my new SD card into the Switch I received Error Code 2016-0247: «The MicroSD card cannot be read by the system.» Please reinsert the MicroSD card. If problem persists, please Format the microSD card.» So, of course, powered off, reinserted the card, and powered back on to the same error code. So, I initialized the card on the Switch, booted down, and rebooted. The card was then recognized, but of course my personal data was not on it. I then did the same process of copying my Nintendo folder from my computer to the MicroSD, popped the MicroSD back in and got the same error. My 64 GB card works just fine, but when transferring the «Nintendo» folder to the fresh, Nintendo Switch formatted MicroSD card I continue to get this error. Is this type of card incompatible? On the Nintendo Support Page it lists that my card is compatible (SDXC UHS-1).
Any thoughts, solutions, or should I just return it?
Bug Report
[ If any section does not apply, replace its contents with «N/A». ]
[ Lines between [ ] (square brackets) should be removed before posting. ]
[ * ]
[ Note: If the bug or crash you encountered is related to; ]
[ — software used to make «backups», ]
[ — software explicitly distributed for piracy, etc ]
[ then contributors will not provide support for your issue and your issue will be closed. ]
What’s the issue you encountered?
error 2016-0247
unable to access microsd card
[ Describe the issue in detail and what you were doing beforehand. ]
switch lite running ams 1.2.6 trimmed emummc 13,2,1, ofw 13.2, working fine (authentic sandisk class a1 512gb)
new sdcard,
created new emummc on a new sdcard (trimmed),
updated to [Atmosphère 1.3.0 (pre-release)]
installed 14.0 with daybreak fat32+xfat
when the console boots up it says error 2016-0247
guaranteed authentic microsd card ( and i get sandisk from official distributor )
[ Did you make any changes related to Atmosphère itself? ]
just updated it, exos for prodinfo and hosts on emummc for ninty servers
[ If so, make sure to include details relating to what exactly you changed. ]
How can the issue be reproduced?
[ * ]
[ Include a detailed step by step process for recreating your issue. ]
Crash Report
[ Crash reports can be found under /atmosphere/crash_reports. ]
[ If your issue caused Atmosphère to crash, include the crash report(s) by creating a gist and pasting the link here. ]
[ If you don’t include a crash report in instances of crash related issues, we will ask you one to provide one. ]
System Firmware Version
X.X.X
[ Replace X’s with system firmware version at time of crash. ]
[ You can find your firmware version in the Settings -> System, under «System Update». ]
[ If it says «Update Pending», you can clear the pending update by rebooting to Maintenance Mode. ]
Environment?
-
What bootloader (fusèe, hekate, etc) was Atmosphère launched by:
-
Official release or unofficial build:
- [ Official release version x.x.x (or) unofficial build ]
- [ If using an unofficial build, include details on where/how you acquired the build. ]
- [ Ex: Self-compilation ]
- [ Ex: Kosmos’ distribution of Atmosphère ]
hekate launches fusee bin
payload=bootloader/payloads/fusee.bin
-
Do you have additional kips or sysmodules you’re loading:
-
Homebrew software installed: [ * ]
-
EmuMMC or SysNAND:
- [ If using an EmuMMC, include whether it’s partition-based or file-based. ]
parition based
- [ If using an EmuMMC, include whether it’s partition-based or file-based. ]
Additional context?
- Additional info about your environment:
- [ Any other information relevant to your issue. ]
Nintendo is a video game console that was released on September 23, 1889. It was developed by Nintendo Co., Ltd. The game system can be used to play video games on your computer or on your television. The game system features different gameplays, and it features different characters that you can choose from.
There are many games that are compatible with the Nintendo game system. Some of these games include Super Mario Brothers, Pokemon, The Legend of Zelda, Super Smash Bros, and Splatoon.
Tech Support 24/7
Ask a Tech Specialist Online
Connect with the Expert via email, text or phone. Include photos, documents, and more. Get step-by-step instructions from verified Tech Support Specialists.
On this page, you will find more information about the most common causes and most relevant solutions for the Switch error ‘2016-0247’. Do you need help straight away? Visit our support page.
Error information
What causes the 2016-0247 error?
The Nintendo documentation indicates that error code ‘2016-0247’ is caused by the following problem: «An error code while downloading software or updating a game has occurred The MicroSD is likely at fault».
Do you think there is another cause for this error? Let others know in the comments.
How to solve Nintendo Switch error 2016-0247
We’ve created a list of solutions which you can follow if you want to solve this Switch problem yourself. Do you need more help? Visit our support page if you need professional support with Switch right away.
Tech Support 24/7
Ask a Tech Specialist Online
Connect with the Expert via email, text or phone. Include photos, documents, and more. Get step-by-step instructions from verified Tech Support Specialists.
Verified solution
You might encounter an error while playing a game on your Nintendo game system. This error can occur during the game and it can prevent you from playing the game properly. It is very annoying and frustrating to experience this error while playing a video game. This error can be caused by a common computer problem or it can be caused by an issue with your Nintendo console or your Nintendo account.
One of the most common errors that you might encounter while playing a game on your Nintendo game system is the Nintendo 2016-0247 Error. This error occurs when you try to access your Nintendo account or when you try to play a game on your Nintendo game system. This error can be annoying and frustrating because you cannot access the game properly.
The problem can be caused by an issue with your device or it can be caused by an issue with your internet connection. It is possible that another application is interfering with the proper functioning of your Nintendo game system. To fix this error, you need to try these solutions one by one until you find the solution that works for you.
The Nintendo 2016-0247 error usually happens when the users try to download software to the microSD card on Nintendo. It is possible that the microSD card worked on the console before, but now an error code is displayed. This error occurs on Nintendo Switch Family, Nintendo Switch, Nintendo Switch Lite, Nintendo Switch — OLED Model.
You need to turn off your console by pressing the and holding the Power button. Then, select power options > turn off. After that, you need to remove your microSD card from your console. Gently push down on the top of the microSD card until you hear a click, then slide it out of the microSD card slot. Then, you can reinsert the microSD card and perform the system update. To perform a system update, you need to select System Settings > System > System Update > If an update is available, the download process will begin automatically.
However, if the microSD still can not be read, you can try to format your microSD card. You can do it by clicking System Settings > System > Formatting Options > Format microSD card > Continue > Format. You should note that when you format it, all of your data cannot be recovered.
Have you found a solution yourself, but it is not in the list? Share your solution in the comments below.
Need more help?
Do you need more help?
Tech experts are ready to answer your questions.
Ask a question
Перейти к контенту
Bug Report
[ If any section does not apply, replace its contents with «N/A». ]
[ Lines between [ ] (square brackets) should be removed before posting. ]
[ * ]
[ Note: If the bug or crash you encountered is related to; ]
[ — software used to make «backups», ]
[ — software explicitly distributed for piracy, etc ]
[ then contributors will not provide support for your issue and your issue will be closed. ]
What’s the issue you encountered?
error 2016-0247
unable to access microsd card
[ Describe the issue in detail and what you were doing beforehand. ]
switch lite running ams 1.2.6 trimmed emummc 13,2,1, ofw 13.2, working fine (authentic sandisk class a1 512gb)
new sdcard,
created new emummc on a new sdcard (trimmed),
updated to [Atmosphère 1.3.0 (pre-release)]
installed 14.0 with daybreak fat32+xfat
when the console boots up it says error 2016-0247
guaranteed authentic microsd card ( and i get sandisk from official distributor )
[ Did you make any changes related to Atmosphère itself? ]
just updated it, exos for prodinfo and hosts on emummc for ninty servers
[ If so, make sure to include details relating to what exactly you changed. ]
How can the issue be reproduced?
[ * ]
[ Include a detailed step by step process for recreating your issue. ]
Crash Report
[ Crash reports can be found under /atmosphere/crash_reports. ]
[ If your issue caused Atmosphère to crash, include the crash report(s) by creating a gist and pasting the link here. ]
[ If you don’t include a crash report in instances of crash related issues, we will ask you one to provide one. ]
System Firmware Version
X.X.X
[ Replace X’s with system firmware version at time of crash. ]
[ You can find your firmware version in the Settings -> System, under «System Update». ]
[ If it says «Update Pending», you can clear the pending update by rebooting to Maintenance Mode. ]
Environment?
-
What bootloader (fusèe, hekate, etc) was Atmosphère launched by:
-
Official release or unofficial build:
- [ Official release version x.x.x (or) unofficial build ]
- [ If using an unofficial build, include details on where/how you acquired the build. ]
- [ Ex: Self-compilation ]
- [ Ex: Kosmos’ distribution of Atmosphère ]
hekate launches fusee bin
payload=bootloader/payloads/fusee.bin
-
Do you have additional kips or sysmodules you’re loading:
-
Homebrew software installed: [ * ]
-
EmuMMC or SysNAND:
- [ If using an EmuMMC, include whether it’s partition-based or file-based. ]
parition based
- [ If using an EmuMMC, include whether it’s partition-based or file-based. ]
Additional context?
- Additional info about your environment:
- [ Any other information relevant to your issue. ]
An error code is received when trying to download software to the microSD card on Nintendo Switch.
It is possible that the microSD card worked on the console before, but now an error code is displayed.
Additional Information:
If a microSD card is inserted on the console, the save location will default to the microSD card when downloading or redownloading software.
What to Do:
-
Power off the console and remove the microSD card.
-
Verify that the microSD card is compatible with Nintendo Switch.
-
If the microSD card is not supported, replacing it with a supported type may resolve the problem.
The following types of microSD cards are supported on Nintendo Switch:
-
microSD (up to 2 GB)
-
microSDHC (4 GB — 32 GB)
-
microSDXC (64 GB and above)
In order to use a microSDXC card on the Nintendo Switch console, a system update is required.
In order to improve your gameplay experience, using a microSD card with a higher transfer speed is recommended.
High-speed microSD card guidelines:
-
UHS-I (Ultra High Speed Phase I) compatible
-
Transfer speed 60 — 95 MB/sec (the higher the transfer speed, the better gameplay experience on Nintendo Switch)
-
-
Reinsert the microSD card and perform a system update.
-
The system menu version may not necessarily change after this update.
-
-
If the microSD card cannot be read on Nintendo Switch, try the following:
-
Format the microSD card.
-
Once formatted, the information on the microSD card cannot be recovered. If screenshots or videos are stored on the microSD card, be sure to first back up the information on a computer.
-
If downloadable software was saved to the microSD card, it can be redownloaded using the same Nintendo Account where it was purchased.
-
-
Use a different microSD card.
-
Remove the microSD card and download directly to the system memory.
-
Situation Not Resolved:
If the error persists with multiple microSD cards, then the Nintendo Switch console will need to be repaired.
-
For testing purposes, be sure to include one or more of the problematic microSD cards that were being used with the console.
If the error persists and a microSD card is not being used, then the Nintendo Switch console will need to be repaired.
If you would like further assistance with the Nintendo Switch console, please contact Nintendo Customer Service.
Hi everybody, I’m at a loss here. I know there are a handful of posts with this topic, but I have yet to encounter a solution for this one specifically. I just purchased a new microSD card to upgrade my current 64 GB Sandisk Ultra. I purchased a 128GB Sandisk Ultra Plus for a great price from Best Buy, and followed the steps on the Nintendo support website.
Upon putting my new SD card into the Switch I received Error Code 2016-0247: «The MicroSD card cannot be read by the system.» Please reinsert the MicroSD card. If problem persists, please Format the microSD card.» So, of course, powered off, reinserted the card, and powered back on to the same error code. So, I initialized the card on the Switch, booted down, and rebooted. The card was then recognized, but of course my personal data was not on it. I then did the same process of copying my Nintendo folder from my computer to the MicroSD, popped the MicroSD back in and got the same error. My 64 GB card works just fine, but when transferring the «Nintendo» folder to the fresh, Nintendo Switch formatted MicroSD card I continue to get this error. Is this type of card incompatible? On the Nintendo Support Page it lists that my card is compatible (SDXC UHS-1).
Any thoughts, solutions, or should I just return it?
Nintendo is a video game console that was released on September 23, 1889. It was developed by Nintendo Co., Ltd. The game system can be used to play video games on your computer or on your television. The game system features different gameplays, and it features different characters that you can choose from.
There are many games that are compatible with the Nintendo game system. Some of these games include Super Mario Brothers, Pokemon, The Legend of Zelda, Super Smash Bros, and Splatoon.
Tech Support 24/7
Ask a Tech Specialist Online
Connect with the Expert via email, text or phone. Include photos, documents, and more. Get step-by-step instructions from verified Tech Support Specialists.
On this page, you will find more information about the most common causes and most relevant solutions for the Switch error ‘2016-0247’. Do you need help straight away? Visit our support page.
Error information
What causes the 2016-0247 error?
The Nintendo documentation indicates that error code ‘2016-0247’ is caused by the following problem: «An error code while downloading software or updating a game has occurred The MicroSD is likely at fault».
Do you think there is another cause for this error? Let others know in the comments.
How to solve Nintendo Switch error 2016-0247
We’ve created a list of solutions which you can follow if you want to solve this Switch problem yourself. Do you need more help? Visit our support page if you need professional support with Switch right away.
Tech Support 24/7
Ask a Tech Specialist Online
Connect with the Expert via email, text or phone. Include photos, documents, and more. Get step-by-step instructions from verified Tech Support Specialists.
Verified solution
You might encounter an error while playing a game on your Nintendo game system. This error can occur during the game and it can prevent you from playing the game properly. It is very annoying and frustrating to experience this error while playing a video game. This error can be caused by a common computer problem or it can be caused by an issue with your Nintendo console or your Nintendo account.
One of the most common errors that you might encounter while playing a game on your Nintendo game system is the Nintendo 2016-0247 Error. This error occurs when you try to access your Nintendo account or when you try to play a game on your Nintendo game system. This error can be annoying and frustrating because you cannot access the game properly.
The problem can be caused by an issue with your device or it can be caused by an issue with your internet connection. It is possible that another application is interfering with the proper functioning of your Nintendo game system. To fix this error, you need to try these solutions one by one until you find the solution that works for you.
The Nintendo 2016-0247 error usually happens when the users try to download software to the microSD card on Nintendo. It is possible that the microSD card worked on the console before, but now an error code is displayed. This error occurs on Nintendo Switch Family, Nintendo Switch, Nintendo Switch Lite, Nintendo Switch — OLED Model.
You need to turn off your console by pressing the and holding the Power button. Then, select power options > turn off. After that, you need to remove your microSD card from your console. Gently push down on the top of the microSD card until you hear a click, then slide it out of the microSD card slot. Then, you can reinsert the microSD card and perform the system update. To perform a system update, you need to select System Settings > System > System Update > If an update is available, the download process will begin automatically.
However, if the microSD still can not be read, you can try to format your microSD card. You can do it by clicking System Settings > System > Formatting Options > Format microSD card > Continue > Format. You should note that when you format it, all of your data cannot be recovered.
Have you found a solution yourself, but it is not in the list? Share your solution in the comments below.
Need more help?
Do you need more help?
Tech experts are ready to answer your questions.
Ask a question
Hi everybody, I’m at a loss here. I know there are a handful of posts with this topic, but I have yet to encounter a solution for this one specifically. I just purchased a new microSD card to upgrade my current 64 GB Sandisk Ultra. I purchased a 128GB Sandisk Ultra Plus for a great price from Best Buy, and followed the steps on the Nintendo support website.
Upon putting my new SD card into the Switch I received Error Code 2016-0247: «The MicroSD card cannot be read by the system.» Please reinsert the MicroSD card. If problem persists, please Format the microSD card.» So, of course, powered off, reinserted the card, and powered back on to the same error code. So, I initialized the card on the Switch, booted down, and rebooted. The card was then recognized, but of course my personal data was not on it. I then did the same process of copying my Nintendo folder from my computer to the MicroSD, popped the MicroSD back in and got the same error. My 64 GB card works just fine, but when transferring the «Nintendo» folder to the fresh, Nintendo Switch formatted MicroSD card I continue to get this error. Is this type of card incompatible? On the Nintendo Support Page it lists that my card is compatible (SDXC UHS-1).
Any thoughts, solutions, or should I just return it?
submitted by /u/Neoncloudff
[link] [….]
…