No port for remote debugger esxi ошибка

I was trying to install Esxi 7.0 on virtual box but I’m getting the following error.

PSOD error

I tried with Esxi 6.5 but was getting similar kind of error.

VM Config: 4Cpus, 4GB RAM,40GB HDD

My Machine Specs: i7 8th Gen 8 cores, 32 RAM

asked Apr 13, 2021 at 6:12

V3nomXP's user avatar

The ESXi installer is itself ESXi and you’re in a chicken and egg situation where the installer is crashing and you have no core dump file or partition configured. You can tell this from the bottom 3 lines:

  • No place on disk to dump data.
  • No file configured to dump data.
  • No port for remote debugger. «Escape» for local debugger.

If you’re really brave press the «Escape» key and you can get to the kernel text logs which can frequently tell you a lot about the cause of the crash. But reading the logs at the PSOD prompt is a pain and something I try to avoid by always having a place to dump the core file (the «data» referred to above).

I’d suggest that you either install ESXi to a USB flash drive on bare hardware (see https://www.nakivo.com/blog/run-esxi-from-usb-flash-drive-guide/) or grab an ESXi dd-image and put that on either a physical or virtual USB flash drive (https://www.virten.net/2014/12/clone-esxi-installations-on-sd-cards-or-usb-flash-drives/). You can then pass the USB image through to your virtual environment. By doing it this way you will already have created a core dump partition so that if ESXi crashes you can get a core dump. The ESXi kernel logs, which are text files, are part of the core dump and https://communities.vmware.com/t5/ESXi-Discussions/Kernel-Dump-Analysis-Tool/td-p/1429887 has some guidance on extracting them from the dump.

Lastly, if you simply must do everything in a virtual environment you could try creating a core dump partition on a second disk (type 0xFC and size 2+GB) and maybe if you’re lucky the installer will pick it up. If you can get to a command prompt before the PSOD then you can use esxcli to create, configure and make active a core dump partition but pay ignore size recommendations under 2 GB. Nothing is as frustrating as a truncated core dump. See https://kb.vmware.com/s/article/2004299 for more info.

Dharman's user avatar

Dharman♦

30.5k22 gold badges84 silver badges133 bronze badges

answered Apr 13, 2021 at 13:23

Erik's user avatar

ErikErik

875 bronze badges

1

Источник

VMware PSOD Purple Screen of Death — Debugger waiting (world 2078) — no port for remote debugger. «Escape» for local debugger

How to deal with PSOD — VMware PSOD Purple Screen of Death — Debugger waiting (world 2078) — no port for remote debugger. «Escape» for local debugger — Easy troubleshooting steps and how to identify or determine exact root cause of the PSOD issue

Host is down with PSOD with the above said error. Verified BIOS settings, worked with on site engineer, contacted the IBM server support (since this is IBM server, have contacted IBM, if it is IBM or some other hardware, you may need to reach out the respective vendor)

Sometimes it could be server hardware issue like DIMMs, CPU, Processor related or may be a chance of network related.

Please have a through check on the above said and come to a conclusion what could the issue. Based on that, need to troubleshoot the issue.

Popular posts from this blog

IBM x3650 M4 Series Server Model — Activation Keys Backup to be taken for IMM Moduel II, why?

Image

If you are planning to replace the system board (Mother Board) for M4 series of IBM xSeries 3650 model server, you should and must take the activation keys backup, otherwise you will miss the IMM key. IMM key something like iLO Activation key on HP servers. If that  iLO key didn’t acivated, then you won’t get the ‘Remote Access’ option. In the same way, IBM series requires a key to be activated to access the IMM console. IMM Activation to be backuped and restore once the new board get replaced. Here is the screenshot there you see more options what we discussed so far —

HPONCFG GUI Utility / Tool Download Links — x32 & x64 bit versions, 2003 & 2008 Windows Versions

Here goes the links to download the versions. With this new GUI version, we can change /reset the iLO password,  change the IP address, Subnet & Gateway configurations and many more — HP Lights-Out Online Configuration Utility for Windows 2003/2008 x64 Editions Click here to download x64 bit version Type: Software — Lights-Out Management Version: 3.1.1.0 (22 Nov 2010) Operating System(s): File name: cp013639.exe (1.0 MB) HP Lights-Out Online Configuration Utility for Windows Server 2003/2008 Click here to download x32 bit version (3.2.0.0) Type: Software — Lights-Out Management Version: 3.2.0.0 (18 Jul 2011) Operating System(s): Microsoft Windows Server 2003, Microsoft Windows Server 2008 W32 File name: cp015357.exe (950 KB) HP Lights-Out Online Configuration Utility for Windows Server 2003/2008 Click here to download x32 bit version (3.1.0.0) Type: Software — Lights-Out Management Version: 3

Источник
View previous topic :: View next topic  
Author Message
Adel Ahmed
Veteran
Veteran

Joined: 21 Sep 2012
Posts: 1389
PostPosted: Sun Mar 06, 2016 12:43 pm    Post subject: installing esx in a kvm virtual machine Reply with quote
I’m trying to install esx on a kvm virtual machine, CPU check is fine but I get a purple screen of death stating:

no place on disk to dump data

no file configured to dummp data

no port for remote debugger

Im using a virtio disk with qcow 2 storage format(ive tried ide as well)

50GB storage size

any clue on what might be casuing this problem?

thanks in advance
Back to top

View user's profile Send private message

szatox
Advocate
Advocate

Joined: 27 Aug 2013
Posts: 2695
PostPosted: Sun Mar 06, 2016 2:50 pm    Post subject: Reply with quote

Code:

    net/e100

    net/e1000

    net/e1000e

    net/bnx2

    net/tg3

    net/forcedeth

    net/pcnet32

    block/cciss

    scsi/adp94xx

    scsi/aic7xxx

    scsi/aic79xx

    scsi/ips

    scsi/lpfcdd-v732

    scsi/megaraid2

    scsi/mptscsi_2xx

    scsi/qla2200-v7.07

    scsi/megaraid_sas

    scsi/qla4010

    scsi/qla4022

    scsi/vmkiscsi

    scsi/aacraid_esx30

    scsi/lpfcdd-v7xx

    scsi/qla2200-v7xx



The list on wiki is pretty old, but I don’t see virtio there. Why would it actually need to be supported, ESX is ment to run on bare metal and host VMs, not the other way around.

Also, does your CPU support nested virtualization? That’s another possible pitfall you may encounter after you find a working virtual hardware for this.

Oh, and finaly, KVM is likely to conflict with vmware. I don’t know how well it works when you use different hypervisors on different layers, but it’s likely to become a problem too.
Back to top

View user's profile Send private message

Adel Ahmed
Veteran
Veteran

Joined: 21 Sep 2012
Posts: 1389
PostPosted: Tue Mar 08, 2016 10:21 pm    Post subject: Reply with quote
I’m doing this for educational purpose

I need to create a tutorial on backing up esxi using tsm
Back to top

View user's profile Send private message

Adel Ahmed
Veteran
Veteran

Joined: 21 Sep 2012
Posts: 1389
PostPosted: Sun Mar 13, 2016 6:39 pm    Post subject: Reply with quote
I’m still stuck and would appreciate any assistance provided
Back to top

View user's profile Send private message

Adel Ahmed
Veteran
Veteran

Joined: 21 Sep 2012
Posts: 1389
PostPosted: Sun Mar 20, 2016 2:42 am    Post subject: Reply with quote
bump
Back to top

View user's profile Send private message

szatox
Advocate
Advocate

Joined: 27 Aug 2013
Posts: 2695
PostPosted: Sat Apr 09, 2016 6:39 pm    Post subject: Reply with quote
If you’re still interested in it, I have installed ESXi 6 on KVM.

The image provided by vmware has guest’s drivers for vmxnet3, which is also supported by quemu (so you have networking without hassle).

The first pitfall was RAM allocation. I started with 2 GB and assumption I can increase it after I login to esx and see it work, which turned out not to be enough for the installer ( :!: ) to run. Once I bumped the limit it to 5GB, it succeeded.

However, (not very surprising), the other point I made earlier still holds: when I tried to run a VM inside, it popped big red bar saying it’s running on an incompatible hypervisor. Maybe hardware support for nested virtualization would help with this. Maybe a compatible hypervisor would. VMware’s virtual labs run on vmware. I don’t know what the underlying hardware is.
Back to top

View user's profile Send private message

1clue
Advocate
Advocate

Joined: 05 Feb 2006
Posts: 2569
PostPosted: Sat Apr 09, 2016 7:14 pm    Post subject: Reply with quote
I think that for your paper to be useful in the real world you will need a bare metal installation. I would like to read your bare metal paper, but would not bother if you put it inside kvm.

Luckily people typically install the esxi hypervisor on a flash drive. 4g should be adequate but I’m not sure of the difcerence between esx and esxi.

You will still need at least one physical drive to use as a datastore, and something for the backup.
Back to top

View user's profile Send private message

szatox
Advocate
Advocate

Joined: 27 Aug 2013
Posts: 2695
PostPosted: Sat Apr 09, 2016 7:40 pm    Post subject: Reply with quote
It’s not meant for a real world :)

Adel mentioned he needs a lab and wanted to do that with KVM. In fact I had the same reason to play with it and I also tend to use KVM. Performance* is not an issue as long as you have hardware support (and if you don’t, bare metal won’t help). At this point it’s a matter of convenience and resources we already have in our hands.

Quote:
I get a purple screen of death stating:

no place on disk to dump data

btw, I created 20 GB sparse file for virtual DAS. After installation the file’s size is 0.5GB and it automagically created 10 GB datastore inside.

* and the UI is much more responsive than those enterprisy things I have at work. Probably due to tunnelling with citrix and whatnot, but one can never be sure
Back to top

View user's profile Send private message

Adel Ahmed
Veteran
Veteran

Joined: 21 Sep 2012
Posts: 1389
PostPosted: Mon Apr 11, 2016 9:34 am    Post subject: Reply with quote
correct, not real word just a lab.

how did you get it to work? increasing memory to 5GB did not work, and I cannot find vmxnet3 in virt-manager, should I edit the xml instead?

what is the type and parameters of the disk you are using?

thanks
Back to top

View user's profile Send private message

1clue
Advocate
Advocate

Joined: 05 Feb 2006
Posts: 2569
PostPosted: Mon Apr 11, 2016 8:04 pm    Post subject: Reply with quote
I understand that it’s just a lab.

I respectfully submit that the fact of running esx inside a vm probably negates the validity of the lab, unless the point was specifically to run a hypevisor within a non-similar hypervisor.

Really really not trying to be a pain here. I’m done here unless directly addressed again.

Thanks.
Back to top

View user's profile Send private message

szatox
Advocate
Advocate

Joined: 27 Aug 2013
Posts: 2695
PostPosted: Mon Apr 11, 2016 8:36 pm    Post subject: Reply with quote
I don’t use virt and run qemu directly with command line. Also, my successfully installed esx failed to boot with the very same message you posted, after I removed cdrom.

I guess starting with cdrom specified in front of the target drive image wasn’t a good idea. Silly as it sounds, I had to reinstall afterwards.

Hint:

qemu-system-x86_64 -name esx -enable-kvm -m 5000 -smp cores=2 -drive file=./esx_drive.img,cache=none,format=raw -drive file=./esx_install.iso,cache=none,media=cdrom -netdev type=tap,id=net1 -device vmxnet3,netdev=net1

The above line must be run as root. Running as user is possible, but takes a bit of preparation on your part (you must be able to configure TAP yourself)

For convenience I have dhcpd bound to a bridge and a script that enslaves the tap interface before my vm binds it, so it will receive an IP as soon as it requests it. For a single test or two, setting IP manually on the TAP and inside the vm can work just as well though.
Back to top

View user's profile Send private message

Display posts from previous:   

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
Источник


Posted by Jmeinzen 2018-03-20T10:05:51Z

Home computer (intel Xeonquad core, 4 GB RAM, 500 GB Sata)

I am trying to install EXSI trial version 6.5 from a USB. The computer boots and run ESXi install setup but fails to complete.

Error: purple screen
Failed to mem_map pci bar 0
No place on Disk to dump data
No file configured to dump data
No vsan Object configured to dump data
No port for remote debugger.

P.s- on bios I can’t get the sata hdd as second drive on boot preference if I choose usb.

Image: post content

6 Replies

  • It is probably due to your computer hardware being compatible with Esxi 6.5 , did you check the HCL?

    https://www.vmware.com/resources/compatibility/search.php Opens a new window


    Was this post helpful?
    thumb_up
    thumb_down

  • Author Jerry Meinzen

    @Scott — Before Installation, read this on vmware documentation but I wanted to skip this part thinking my PC has some super specs. Bad decision!

    Checked on the above link. Mine is Intel Core 2 Quad CPU. I cant find this on the compatability list! 


    Was this post helpful?
    thumb_up
    thumb_down

  • Well that’s your problem , never skip these skips as they are important and will bite you (often very hard) in the rear. Esxi usually runs on a server not a desktop PC, even if it has got super specs.

    Generally if it is not the list , it won’t work.


    Was this post helpful?
    thumb_up
    thumb_down

  • Author Ace Suvon

    Core 2 Quad is pretty old now. For what it’s worth you can totally run ESXi on a desktop computer, I do it now for my home lab.

    But yes I did check with the hardware compatibility list. Only issue I ran into was my NIC — I just purchased a $20 PCIe NIC from Amazon that was on the compatibility list and all was good.


    1 found this helpful
    thumb_up
    thumb_down

  • 6.5 ESXi might not run, but 5.5 very well just might run.  You can still learn a lot in a home lab from 5.5


    1 found this helpful
    thumb_up
    thumb_down

  • Author Jerry Meinzen

    @Michael. Thanks for your input. Will try 5.5. Was trying KVM !


    Was this post helpful?
    thumb_up
    thumb_down

Источник

Grilled Giardiniera-Stuffed Steak Sandwich image

Grilled Giardiniera-Stuffed Steak Sandwich

This rolled flank steak is inspired by the Italian beef sandwich, a Chicago delicacy typically consisting of chopped thin slices of roast beef stuffed…

Provided by Food Network Kitchen

Mapo Potato image

Mapo Potato

Let’s be clear: Nothing surpasses the hearty deliciousness of a traditional mapo tofu. But for those days when you find yourself without soft tofu in the…

Provided by Hetty McKinnon

Chili image

Chili

This is a spicy, smoky and hearty pot of chili. It’s the kind of chili you need after a long day skiing — or hibernating. To create a rich and thick sauce,…

Provided by Ali Slagle

Banket image

Banket

This recipe is from my mother. It is the one she taught me with a slight tweak. In my home on the holidays one way to show someone or a family they were…

Provided by Jena Lewis

Moroccan Nachos image

Moroccan Nachos

This Moroccan twist on the much-loved appetizer features kefta, a ground beef (or lamb) mixture seasoned with parsley, cilantro, mint, paprika and cumin,…

Provided by Nargisse Benkabbou

Peanut Butter Brownie Cups image

Peanut Butter Brownie Cups

I’m not a chocolate fan (atleast not the kind made in the U.S.), but I LOVE peanut butter and chocolate and this hit the spot. I found the recipe in 2007…

Provided by AmyZoe

Banana Cream Pudding image

Banana Cream Pudding

This fabulous version of the favorite Southern dessert boosts the banana flavor by infusing it into the homemade vanilla pudding, in addition to the traditional…

Provided by Martha Stewart

Lemon Russian Tea Cakes image

Lemon Russian Tea Cakes

I love lemon desserts,these are a simple cookie I can make quickly. The recipe is based on the pecan Russian tea cakes.I don’t like lemon extract,instead…

Provided by Stephanie L. @nurseladycooks

Easy Churros with Mexican Chocolate Sauce image

Easy Churros with Mexican Chocolate Sauce

Forgo the traditional frying — and mixing up the batter! — for this Latin American treat. Instead, bake store-bought puff pastry for churros that are…

Provided by Martha Stewart

Easy Lasagna image

Easy Lasagna

Everyone loves lasagna. It’s perfect for feeding a big crowd and a hit at potlucks. But most people reserve it for a weekend cooking project since it can…

Provided by Food Network Kitchen

Grilled Vegetables Korean-Style image

Grilled Vegetables Korean-Style

Who doesn’t love grilled vegetables — the sauce just takes them over the top.

Provided by Daily Inspiration S @DailyInspiration

Outrageous Chocolate Cookies image

Outrageous Chocolate Cookies

From Martha Stewart. I’m putting this here for safe keeping. This is a chocolate cookie with chocolate chunks. Yum! Do not over cook this cookie since…

Provided by C. Taylor

CERTO® Citrus Jelly image

CERTO® Citrus Jelly

A blend of freshly squeezed orange and lemon juices puts the citrusy deliciousness in this CERTO Citrus Jelly.

Provided by My Food and Family

Previous

Next

GETTING PSOD WHILE INSTALLING ESXI 7.0 ON VIRTUAL BOX

getting-psod-while-installing-esxi-70-on-virtual-box image

WebApr 13, 2021 No port for remote debugger. «Escape» for local debugger. If you’re really brave press the «Escape» key and you can get to the …
From stackoverflow.com
Reviews 1

Apr 13, 2021 No port for remote debugger. «Escape» for local debugger. If you’re really brave press the «Escape» key and you can get to the …»>
See details

ESXI 6.5 WON’T INSTALL — SPICEWORKS COMMUNITY

esxi-65-wont-install-spiceworks-community image

WebMar 21, 2018 No port for remote debugger. P.s- on bios I can’t get the sata hdd as second drive on boot preference if I choose usb. Spice (6) Reply (6) flag Report Jmeinzen jalapeno 6 Replies scottbrindley ghost …
From community.spiceworks.com

DEBUGGING A LINUX KERNEL MODULE USING SERIAL PORT

debugging-a-linux-kernel-module-using-serial-port image

WebOct 30, 2013 Debuggee: I followed this tutorial on how to setup gdb, and I seem to be getting replies (the serial port seems to be fine) when I start debugging, however gdb is getting junk and doesn’t manage to debug …
From stackoverflow.com

Oct 30, 2013 Debuggee: I followed this tutorial on how to setup gdb, and I seem to be getting replies (the serial port seems to be fine) when I start debugging, however gdb is getting junk and doesn’t manage to debug …»>
See details

PORT REQUIREMENTS FOR ESXI (2039095) | VMWARE KB

Web38 rows Jun 19, 2023 This port must not be blocked by firewalls between the server and the hosts or between hosts. 1024 (dynamic) TCP/UDP. ESXi Host. Active Directory …
From kb.vmware.com
Estimated Reading Time 5 mins

38 rows Jun 19, 2023 This port must not be blocked by firewalls between the server and the hosts or between hosts. 1024 (dynamic) TCP/UDP. ESXi Host. Active Directory …»>
See details

VMWARE REMOTE CONSOLE 11.X — CONNECTION ERROR (76672)

WebJun 22, 2021 The issue can be resolved by using either one of the below methods: Modify your firewall configuration to ensure that VMware Remote Console can reach port 443 …
From kb.vmware.com
Estimated Reading Time 1 min

Jun 22, 2021 The issue can be resolved by using either one of the below methods: Modify your firewall configuration to ensure that VMware Remote Console can reach port 443 …»>
See details

NO PORT FOR REMOTE DEBUGGER ESXI ошибка — IK-MEGAFON.RU

WebYou can tell this from the bottom 3 lines: No place on disk to dump data. No file configured to dump data. No port for remote debugger. «Escape» for local debugger. If you’re …
From ik-megafon.ru

You can tell this from the bottom 3 lines: No place on disk to dump data. No file configured to dump data. No port for remote debugger. «Escape» for local debugger. If you’re …»>
See details

ESXI SERIAL PORT MODES — VMWARE DOCS

WebMay 31, 2019 There are four serial port modes in ESXi: Logging mode – Logging mode is the default mode in a debug build. Logging mode sends the vmkernel.log over the serial …
From docs.vmware.com

May 31, 2019 There are four serial port modes in ESXi: Logging mode – Logging mode is the default mode in a debug build. Logging mode sends the vmkernel.log over the serial …»>
See details

NEW TO ESXI 6, NEED A BIT OF HELP : R/VMWARE — REDDIT

WebI am new to this but what I did was make a bootable CD with ESXi, wipe my harddrive using Hirens boot disk, and then tried to install ESXi from the bootable disk. It installs and then …
From reddit.com

REQUIRED PORTS FOR CONFIGURING AN EXTERNAL FIREWALL TO ALLOW …

WebOct 29, 2020 This article provides information related to configuring an external firewall to allow ESX/ESXi and vCenter Server traffic. CUSTOMER CONNECT; Products and …
From kb.vmware.com

Oct 29, 2020 This article provides information related to configuring an external firewall to allow ESX/ESXi and vCenter Server traffic. CUSTOMER CONNECT; Products and …»>
See details

TCP AND UDP PORTS REQUIRED TO ACCESS ESXI (52960)

WebFeb 21, 2020 TCP/UDP. ESXi Host. Active Directory Server. Bi-directional communication on TCP/UDP ports is required between the ESXi host and the Active Directory Domain …
From kb.vmware.com

Feb 21, 2020 TCP/UDP. ESXi Host. Active Directory Server. Bi-directional communication on TCP/UDP ports is required between the ESXi host and the Active Directory Domain …»>
See details

ESXI HOST MIGHT CRASH WITH PSOD DURING SHUTDOWN WITH IPV6 AND …

WebNov 19, 2020 Coredump to disk. Slot 1 of 1 on devece naa.60030057026a0ab0227474920b4c17a6:9. finalized dump header (14/14) …
From kb.vmware.com

Nov 19, 2020 Coredump to disk. Slot 1 of 1 on devece naa.60030057026a0ab0227474920b4c17a6:9. finalized dump header (14/14) …»>
See details

INCOMING AND OUTGOING FIREWALL PORTS FOR ESXI HOSTS — VMWARE DOCS

WebOct 15, 2020 Updated on 10/15/2020 The vSphere Client and the VMware Host Client allow you to open and close firewall ports for each service or to allow traffic from …
From docs.vmware.com

Oct 15, 2020 Updated on 10/15/2020 The vSphere Client and the VMware Host Client allow you to open and close firewall ports for each service or to allow traffic from …»>
See details

TROUBLESHOOTING NETWORK AND TCP/UDP PORT CONNECTIVITY ISSUES ON …

WebJun 1, 2016 To check if a remote host is online, you can use the ping and vmkping commands on ESX/ESXi host. The syntax of these commands are: # ping destination-ip …
From kb.vmware.com

Jun 1, 2016 To check if a remote host is online, you can use the ping and vmkping commands on ESX/ESXi host. The syntax of these commands are: # ping destination-ip …»>
See details

USING THE LOCAL DEBUGGER TO REVIEW LOGS AFTER AN ESXI HOST FAILS …

WebNov 16, 2012 Resolution The vSphere ESXi local debugger can be used to review logs following a critical failure and purple diagnostic screen. To review logs using the ESXi …
From kb.vmware.com

Nov 16, 2012 Resolution The vSphere ESXi local debugger can be used to review logs following a critical failure and purple diagnostic screen. To review logs using the ESXi …»>
See details

REMOTE DEBUGGING IN VISUAL STUDIO: REMOTE DEBUGGER DOES NOT …

WebJan 19, 2010 No need to use VMWare features. Inside the guest VM run the version of msvsmon that came with your copy of visual studio 2010 (A setup package for just the …
From stackoverflow.com

Jan 19, 2010 No need to use VMWare features. Inside the guest VM run the version of msvsmon that came with your copy of visual studio 2010 (A setup package for just the …»>
See details

PSOD — PURPLE SCREEN OF DEATH — VMWARE TECHNOLOGY NETWORK …

WebOct 15, 2012 10-15-2012 09:49 AM PSOD — Purple Screen of Death Hi everybody! I’m experiencing curiously a problem with our ESXi 5.1 hypervisor. When we power up the …
From communities.vmware.com

Oct 15, 2012 10-15-2012 09:49 AM PSOD — Purple Screen of Death Hi everybody! I’m experiencing curiously a problem with our ESXi 5.1 hypervisor. When we power up the …»>
See details

NO PORT FOR REMOTE DEBUGGER ESXI — VMWARE TECHNOLOGY …

WebMay 15, 2023 05-17-2023 07:16 AM Yes, I confirmed that before installing. Win11, 1.80ghz, 8G ram, x64, 500G mem Any suggestions please? Share Reply 0 Kudos …
From communities.vmware.com

May 15, 2023 05-17-2023 07:16 AM Yes, I confirmed that before installing. Win11, 1.80ghz, 8G ram, x64, 500G mem Any suggestions please? Share Reply 0 Kudos …»>
See details

ESXI 6 HOST NOT DETECTING USB DEVICES AT ALL : R/VMWARE — REDDIT

WebEncountered the problem with an HP server once. Like others said, always go for the manufacturer’s version of ESXi. And in the case you had that, make sure it’s the latest …
From reddit.com

CONFIGURE VSPHERE 5.1 FOR REMOTE DEBUG LOGGING

WebOct 31, 2012 Configure vSphere 5.1 for remote debug logging Recently I have been working with customers on designs for new vSphere 5.1 installs and upgrades. As part …
From vminstructor.com

Oct 31, 2012 Configure vSphere 5.1 for remote debug logging Recently I have been working with customers on designs for new vSphere 5.1 installs and upgrades. As part …»>
See details

Источник

  • No module named sklearn ошибка
  • No such file or directory arduino ошибка
  • No module named config ошибка
  • No such column sqlite ошибка
  • No microcode update loaded for booting processor как исправить ошибку