Read temp func done s9 ошибка

  • #1

В логе последние строчки
set FAN speed according to: temp_highest=73 temp_top1[PWM_T]=73 temp_top1[TEMP_POS_LOCAL]=73 temp_change=1 fix_fan_steps=0
FAN PWM: 94
read_temp_func Done!
CRC error counter=0

Горит зеленый светодиод Normal но майнинг не идет.

Кто нибудь встречался с данной проблемой?

  • #2

по пробуй на горячую поменять конектор на голове

  • #3

Нужно проверить, нет ли такого

IMG_6829.jpg.010b2e90336cb80be8e4f29531f90eb8.jpg

esq

Свой человек


  • #4

Где написано про ошибку CRC error?

  • #5

по пробуй на горячую поменять конектор на голове

Коннекторы полностью отсоединял и вставлял обратно

  • #6

Нужно проверить, нет ли такого

IMG_6829.jpg.010b2e90336cb80be8e4f29531f90eb8.jpg

А что это такое?

  • #7

Где написано про ошибку CRC error?

В логе, во вкладке kernel log в конце.

esq

Свой человек


  • #8

там написано функция чтения температуры завершена, и на сл строчке Счетчик CRC ошибок = 0

  • #9

там написано функция чтения температуры завершена, и на сл строчке Счетчик CRC ошибок = 0

Мхм, т.е проблема в том , что к пулу не подсоединяется?

esq

Свой человек


  • #12

Мхм, т.е проблема в том , что к пулу не подсоединяется?

В логах должно быть упоминание, что нет конекта

  • #14

В логах должно быть упоминание, что нет конекта

В логах вот те самые последние строчки, больше ничего….. Странно очень даже

  • #15

Проблему нашел в соседней теме, проблема в блокировке РОСКОМНАДЗОРОМ.
И тут вопрос, к кому подцепляться чтоб BCH копать?)

  • #16

Представляю что будет когда мокшанцы отключат сами себя от интернета и перейдут на чебурнет. Где майнить будете, на мэйлру? :)

  • #18

В логе последние строчки
set FAN speed according to: temp_highest=73 temp_top1[PWM_T]=73 temp_top1[TEMP_POS_LOCAL]=73 temp_change=1 fix_fan_steps=0
FAN PWM: 94
read_temp_func Done!
CRC error counter=0

Горит зеленый светодиод Normal но майнинг не идет.

Кто нибудь встречался с данной проблемой?

Так как решил проблему?

  • #19

Была блокировка пула в 18 году

  • #20

Вот и я столкнулся с такой проблемой CRC error counter 0. Только у меня всё гораздо проще) у меня отображались 32 чипа, полез их менять) в итоге где-то не контакт в результате плата не может провериться на целостность(… Буду по новой перекатывать чипы)))

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.0-xilinx-ga36f3af-dirty (lzq@ubuntu) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #90 SMP PREEMPT Thu Jun 20 15:01:47 CST 2019
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Xilinx Zynq
[    0.000000] cma: CMA: reserved 128 MiB at 16800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 126976
[    0.000000] free_area_init_node: node 0, pgdat c075a640, node_mem_map debd8000
[    0.000000]   Normal zone: 992 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 126976 pages, LIFO batch:31
[    0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9344 r8192 d15232 u32768
[    0.000000] pcpu-alloc: s9344 r8192 d15232 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 125984
[    0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 364252K/507904K available (5094K kernel code, 292K rwdata, 1948K rodata, 209K init, 259K bss, 143652K reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 — 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 — 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xdf800000 — 0xff000000   ( 504 MB)
[    0.000000]     lowmem  : 0xc0000000 — 0xdf000000   ( 496 MB)
[    0.000000]     pkmap   : 0xbfe00000 — 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 — 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 — 0xc06e8cf4   (7044 kB)
[    0.000000]       .init : 0xc06e9000 — 0xc071d480   ( 210 kB)
[    0.000000]       .data : 0xc071e000 — 0xc0767058   ( 293 kB)
[    0.000000]        .bss : 0xc0767064 — 0xc07a7d64   ( 260 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]     Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000]     RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] ps7-slcr mapped to df802000
[    0.000000] zynq_clock_init: clkc starts at df802100
[    0.000000] Zynq clock init
[    0.000014] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[    0.000293] ps7-ttc #0 at df804000, irq=43
[    0.000591] Console: colour dummy device 80×30
[    0.000620] Calibrating delay loop… 1325.46 BogoMIPS (lpj=6627328)
[    0.040195] pid_max: default: 32768 minimum: 301
[    0.040405] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.040425] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.042589] CPU: Testing write buffer coherency: ok
[    0.042903] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.042958] Setting up static identity map for 0x4d3ec0 — 0x4d3f18
[    0.043178] L310 cache controller enabled
[    0.043197] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[    0.120987] CPU1: Booted secondary processor
[    0.210217] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.210349] Brought up 2 CPUs
[    0.210368] SMP: Total of 2 processors activated.
[    0.210376] CPU: All CPU(s) started in SVC mode.
[    0.211035] devtmpfs: initialized
[    0.213484] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.214675] regulator-dummy: no parameters
[    0.222061] NET: Registered protocol family 16
[    0.224329] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.226599] cpuidle: using governor ladder
[    0.226612] cpuidle: using governor menu
[    0.233982] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[    0.235504] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.235518] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.235624] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[    0.257996] bio: create slab <bio-0> at 0
[    0.259404] vgaarb: loaded
[    0.260093] SCSI subsystem initialized
[    0.261216] usbcore: registered new interface driver usbfs
[    0.261391] usbcore: registered new interface driver hub
[    0.261617] usbcore: registered new device driver usb
[    0.262133] media: Linux media interface: v0.10
[    0.262290] Linux video capture interface: v2.00
[    0.262526] pps_core: LinuxPPS API ver. 1 registered
[    0.262538] pps_core: Software ver. 5.3.6 — Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.262660] PTP clock support registered
[    0.263025] EDAC MC: Ver: 3.0.0
[    0.264059] Advanced Linux Sound Architecture Driver Initialized.
[    0.266797] DMA-API: preallocated 4096 debug entries
[    0.266810] DMA-API: debugging enabled by kernel config
[    0.266880] Switched to clocksource arm_global_timer
[    0.287430] NET: Registered protocol family 2
[    0.288074] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.288131] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.288216] TCP: Hash tables configured (established 4096 bind 4096)
[    0.288257] TCP: reno registered
[    0.288273] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.288304] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.288536] NET: Registered protocol family 1
[    0.288873] RPC: Registered named UNIX socket transport module.
[    0.288886] RPC: Registered udp transport module.
[    0.288894] RPC: Registered tcp transport module.
[    0.288903] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.288915] PCI: CLS 0 bytes, default 64
[    0.289337] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    0.291332] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.293379] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.293576] msgmni has been set to 967
[    0.294333] io scheduler noop registered
[    0.294346] io scheduler deadline registered
[    0.294383] io scheduler cfq registered (default)
[    0.307379] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[    0.307399] dma-pl330 f8003000.ps7-dma:     DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[    0.429162] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[    0.997127] console [ttyPS0] enabled
[    1.001390] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[    1.009019] [drm] Initialized drm 1.1.0 20060810
[    1.026065] brd: module loaded
[    1.035459] loop: module loaded
[    1.044836] e1000e: Intel(R) PRO/1000 Network Driver — 2.3.2-k
[    1.050711] e1000e: Copyright(c) 1999 — 2013 Intel Corporation.
[    1.058566] libphy: XEMACPS mii bus: probed
[    1.062932] ————- phy_id = 0x3625e62
[    1.067945] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[    1.076515] ehci_hcd: USB 2.0 ‘Enhanced’ Host Controller (EHCI) Driver
[    1.083343] ehci-pci: EHCI PCI platform driver
[    1.090645] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[    1.097502] usbcore: registered new interface driver usb-storage
[    1.104346] mousedev: PS/2 mouse device common for all mice
[    1.110461] i2c /dev entries driver
[    1.117375] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[    1.122856] cpufreq_cpu0: failed to get cpu0 regulator: -19
[    1.128766] Xilinx Zynq CpuIdle Driver started
[    1.133613] sdhci: Secure Digital Host Controller Interface driver
[    1.139818] sdhci: Copyright(c) Pierre Ossman
[    1.144089] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.150903] mmc0: no vqmmc regulator found
[    1.154916] mmc0: no vmmc regulator found
[    1.196897] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[    1.205582] usbcore: registered new interface driver usbhid
[    1.211100] usbhid: USB HID core driver
[    1.215798] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[    1.222095] nand: Micron MT29F2G08ABAEAWP
[    1.226066] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[    1.232021] Bad block table found at page 131008, version 0x01
[    1.238263] Bad block table found at page 130944, version 0x01
[    1.244309] 3 ofpart partitions found on MTD device pl353-nand
[    1.250080] Creating 3 MTD partitions on «pl353-nand»:
[    1.255182] 0x000000000000-0x000002000000 : «BOOT.bin-env-dts-kernel»
[    1.263259] 0x000002000000-0x00000b000000 : «angstram-rootfs»
[    1.270576] 0x00000b000000-0x000010000000 : «upgrade-rootfs»
[    1.279322] nf_conntrack version 0.5.0 (7739 buckets, 30956 max)
[    1.285834] ip_tables: (C) 2000-2006 Netfilter Core Team
[    1.291156] TCP: cubic registered
[    1.294386] NET: Registered protocol family 17
[    1.299086] Registering SWP/SWPB emulation handler
[    1.304964] regulator-dummy: disabling
[    1.309333] UBI: attaching mtd1 to ubi0
[    1.835123] UBI: scanning is finished
[    1.846688] UBI: attached mtd1 (name «angstram-rootfs», size 144 MiB) to ubi0
[    1.853769] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    1.860530] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    1.867215] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[    1.874052] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[    1.880053] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.887177] UBI: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 768485946
[    1.896100] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[    1.905332] UBI: background thread «ubi_bgt0d» started, PID 1085
[    1.905338] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.909347] ALSA device list:
[    1.909350]   No soundcards found.
[    1.925635] UBIFS: background thread «ubifs_bgt0_0» started, PID 1087
[    1.954811] UBIFS: recovery needed
[    2.069592] UBIFS: recovery completed
[    2.073261] UBIFS: mounted UBI device 0, volume 0, name «rootfs»
[    2.079202] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    2.088310] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[    2.098204] UBIFS: reserved for root: 0 bytes (0 KiB)
[    2.103229] UBIFS: media format: w4/r0 (latest is w4/r0), UUID E215D0B0-FA6F-4ECF-A946-F9E82D00BE06, small LPT model
[    2.114293] VFS: Mounted root (ubifs filesystem) on device 0:11.
[    2.121049] devtmpfs: mounted
[    2.124159] Freeing unused kernel memory: 208K (c06e9000 — c071d000)
[    2.962140] random: dd urandom read with 0 bits of entropy available
[    3.376906] 
[    3.376906] bcm54xx_config_init
[    4.436928] 
[    4.436928] bcm54xx_config_init
[    8.437743] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[    8.443849] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[   23.185673] In axi fpga driver!
[   23.188776] request_mem_region OK!
[   23.192130] AXI fpga dev virtual address is 0xdf9fc000
[   23.197270] *base_vir_addr = 0xc51e
[   23.212566] In fpga mem driver!
[   23.215648] request_mem_region OK!
[   23.219227] fpga mem virtual address is 0xe2000000
[   24.016945] 
[   24.016945] bcm54xx_config_init
[   25.116925] 
[   25.116925] bcm54xx_config_init
[   29.117742] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[   29.123845] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[  247.919440] random: nonblocking pool is initialized
main.c:13992: log_level = 4
main.c:14019: This is XILINX board. Totalram:       507424768
main.c:14031: Detect 512MB control board of XILINX
driver-bitmain.c:1776: mmap axi_fpga_addr = 0xb6ff9000
driver-bitmain.c:1781: axi_fpga_addr data = 0xc51e
driver-bitmain.c:1797: mmap fpga_mem_addr = 0xb5df2000
driver-bitmain.c:994: forceFreq=-1 forceFlag=0
driver-bitmain.c:1696: min work minertest[0]:912


main.c:8570: DETECT HW version=0000c51e
main.c:14064: miner ID : 807ca5896600881c
main.c:14089: Miner Type = S9
main.c:14101: AsicType = 1387
main.c:14104: real AsicNum = 63
main.c:14197: use critical mode to search freq…
driver-bitmain.c:1876: get PLUG ON=0x000000a0
driver-bitmain.c:1946: Find hashboard on Chain[5]
driver-bitmain.c:1946: Find hashboard on Chain[7]
main.c:2282: Check chain[5] PIC fw version=0x03
main.c:2282: Check chain[7] PIC fw version=0x03
main.c:8940: read pic freq and badcore num…
main.c:8961: chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
main.c:9003: has freq in PIC, will disable freq setting.
main.c:9099: chain[5] has freq in PIC and will jump over…
main.c:9103: Chain[5] has core num in PIC
main.c:9113: Chain[5] ASIC[17] has core num=1
main.c:9113: Chain[5] ASIC[50] has core num=1
main.c:2282: Check chain[5] PIC fw version=0x03
main.c:8940: read pic freq and badcore num…
main.c:8961: chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
main.c:9003: has freq in PIC, will disable freq setting.
main.c:9099: chain[7] has freq in PIC and will jump over…
main.c:9103: Chain[7] has core num in PIC
main.c:9113: Chain[7] ASIC[0] has core num=1
main.c:9113: Chain[7] ASIC[1] has core num=1
main.c:9113: Chain[7] ASIC[2] has core num=1
main.c:9113: Chain[7] ASIC[3] has core num=1
main.c:9113: Chain[7] ASIC[4] has core num=1
main.c:9113: Chain[7] ASIC[5] has core num=1
main.c:9113: Chain[7] ASIC[6] has core num=2
main.c:9113: Chain[7] ASIC[8] has core num=1
main.c:9113: Chain[7] ASIC[9] has core num=1
main.c:9113: Chain[7] ASIC[10] has core num=1
main.c:9113: Chain[7] ASIC[11] has core num=1
main.c:9113: Chain[7] ASIC[12] has core num=1
main.c:9113: Chain[7] ASIC[13] has core num=1
main.c:9113: Chain[7] ASIC[15] has core num=1
main.c:9113: Chain[7] ASIC[18] has core num=1
main.c:9113: Chain[7] ASIC[19] has core num=1
main.c:9113: Chain[7] ASIC[31] has core num=1
main.c:9113: Chain[7] ASIC[39] has core num=2
main.c:9113: Chain[7] ASIC[42] has core num=15
main.c:9113: Chain[7] ASIC[43] has core num=1
main.c:9113: Chain[7] ASIC[44] has core num=1
main.c:9113: Chain[7] ASIC[47] has core num=1
main.c:9113: Chain[7] ASIC[57] has core num=1
main.c:9113: Chain[7] ASIC[58] has core num=1
main.c:9113: Chain[7] ASIC[59] has core num=1
main.c:9113: Chain[7] ASIC[60] has core num=1
main.c:9113: Chain[7] ASIC[61] has core num=1
main.c:9113: Chain[7] ASIC[62] has core num=2
main.c:2282: Check chain[7] PIC fw version=0x03
main.c:9183: get PIC voltage=57 on chain[5], value=910
main.c:9183: get PIC voltage=57 on chain[7], value=910
main.c:9349: chain[5] temp offset record: 62,-3,0,0,0,0,33,0
main.c:9366: chain[5] temp chip I2C addr=0x98
main.c:9349: chain[7] temp offset record: 62,-5,0,0,0,0,33,0
main.c:9366: chain[7] temp chip I2C addr=0x98
main.c:13956: total_exist_chain_num = 2
main.c:9562: CRC error counter=0
main.c:9577: set command mode to VIL
main.c:9649: 
— check asic number
main.c:9745: After Get ASIC NUM CRC error counter=0
main.c:9768: set_baud=0
main.c:10693: The min freq=700
main.c:10695: set real timeout 52, need sleep=379392
main.c:12825: After TEST CRC error counter=0
main.c:14236: search freq for 1 times, completed chain = 2, total chain num = 2 
board_frq_tuning.c:628: single_board_frq_tuning enter
board_frq_tuning.c:629: min_rate, des_rate, fix_volt:13800, 14000, 880
board_frq_tuning.c:254: force_freq not set, don’t need tuning
main.c:14645: restart Miner chance num=2
main.c:14685: waiting for receive_func to exit!
main.c:14699: waiting for pic heart to exit!
main.c:13927: bmminer not found= 1886 root       0:00 grep bmminer

main.c:14758: bmminer not found, restart bmminer …
driver-btm-c5.c:12285:bitmain_c5_init: This is user mode for mining
driver-btm-c5.c:12334:bitmain_c5_init: Detect 512MB control board of XILINX
driver-btm-c5.c:12355:bitmain_c5_init: Miner Type = S9
driver-btm-c5.c:12366:bitmain_c5_init: Miner compile time: Tue Jul 30 20:37:39 CST 2019 type: Antminer S9
driver-btm-c5.c:12456:bitmain_c5_init: miner ID : 807ca5896600881c
driver-btm-c5.c:12613:bitmain_c5_init: Checking fans…
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=4440
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6120
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=4440
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6120
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=4440
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6120
driver-btm-c5.c:13148:bitmain_c5_init: chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
driver-btm-c5.c:13162:bitmain_c5_init: last_freq: 0x00 0x7d 0x0f 0x47 0x0d 0x47 0x04 0x47 0x07 0x47 0x00 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x01 0x47 0x01 0x47 0x0f 0x47 0x0f 0x47 0x0f 0x47 0x0f 0x47 0x05 0x47 0x09 0x47 0x23 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 
driver-btm-c5.c:13189:bitmain_c5_init: Detect: use voltage limit rules on single board!
driver-btm-c5.c:13195:bitmain_c5_init: Detect: S9_63 use voltage level=1 : 1
driver-btm-c5.c:13211:bitmain_c5_init: Chain[J6] has backup chain_voltage=890
driver-btm-c5.c:13228:bitmain_c5_init: No scan based on domain
driver-btm-c5.c:1883:jump_to_app_CheckAndRestorePIC: Check chain[5] PIC fw version=0x03
driver-btm-c5.c:13148:bitmain_c5_init: chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
driver-btm-c5.c:13162:bitmain_c5_init: last_freq: 0x00 0x7d 0x0f 0x49 0x0b 0x49 0x04 0x49 0x09 0x49 0x00 0x49 0x03 0x49 0x03 0x49 0x03 0x49 0x03 0x49 0x03 0x49 0x03 0x49 0x01 0x49 0x01 0x49 0x0f 0x49 0x0f 0x49 0x0f 0x49 0x0f 0x49 0x05 0x49 0x09 0x49 0x23 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 
driver-btm-c5.c:13189:bitmain_c5_init: Detect: use voltage limit rules on single board!
driver-btm-c5.c:13195:bitmain_c5_init: Detect: S9_63 use voltage level=1 : 1
driver-btm-c5.c:13211:bitmain_c5_init: Chain[J8] has backup chain_voltage=890
driver-btm-c5.c:13228:bitmain_c5_init: No scan based on domain
driver-btm-c5.c:1883:jump_to_app_CheckAndRestorePIC: Check chain[7] PIC fw version=0x03
driver-btm-c5.c:12237:init_exist_chain_table: total_exist_chain_num = 2
btm_adjust_hash.c:922:adjust_vol: Chain[J6] original vol value=890 adjusted vol value:890
driver-btm-c5.c:13361:bitmain_c5_init: Chain[J6] orignal chain_voltage_pic=57 value=910
driver-btm-c5.c:13362:bitmain_c5_init: Chain[J6] original chain_voltage_value=890 adjusted chain_voltage_value:890, value=910
driver-btm-c5.c:13379:bitmain_c5_init: Chain[J6] will use backup chain_voltage_pic=890 [91]
driver-btm-c5.c:13389:bitmain_c5_init: Chain[J6] get working chain_voltage_pic=91
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[00] original freq=631 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[01] original freq=631 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[02] original freq=631 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[03] original freq=631 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[04] original freq=631 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[05] original freq=631 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[06] original freq=631 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[07] original freq=631 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[08] original freq=631 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[09] original freq=631 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[10] original freq=631 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[11] original freq=631 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[12] original freq=631 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[13] original freq=631 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[14] original freq=631 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[15] original freq=631 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[16] original freq=631 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[17] original freq=631 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[18] original freq=631 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[19] original freq=631 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[20] original freq=631 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[21] original freq=631 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[22] original freq=631 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[23] original freq=631 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[24] original freq=631 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[25] original freq=631 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[26] original freq=631 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[27] original freq=631 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[28] original freq=631 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[29] original freq=631 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[30] original freq=631 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[31] original freq=631 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[32] original freq=631 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[33] original freq=631 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[34] original freq=631 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[35] original freq=631 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[36] original freq=631 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[37] original freq=631 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[38] original freq=631 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[39] original freq=631 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[40] original freq=631 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[41] original freq=631 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[42] original freq=631 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[43] original freq=631 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[44] original freq=631 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[45] original freq=631 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[46] original freq=631 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[47] original freq=631 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[48] original freq=631 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[49] original freq=631 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[50] original freq=631 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[51] original freq=631 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[52] original freq=631 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[53] original freq=631 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[54] original freq=631 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[55] original freq=631 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[56] original freq=631 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[57] original freq=631 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[58] original freq=631 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[59] original freq=631 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[60] original freq=631 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[61] original freq=631 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[62] original freq=631 adjusted freq:656
btm_adjust_hash.c:922:adjust_vol: Chain[J8] original vol value=890 adjusted vol value:890
driver-btm-c5.c:13361:bitmain_c5_init: Chain[J8] orignal chain_voltage_pic=57 value=910
driver-btm-c5.c:13362:bitmain_c5_init: Chain[J8] original chain_voltage_value=890 adjusted chain_voltage_value:890, value=910
driver-btm-c5.c:13379:bitmain_c5_init: Chain[J8] will use backup chain_voltage_pic=890 [91]
driver-btm-c5.c:13389:bitmain_c5_init: Chain[J8] get working chain_voltage_pic=91
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[00] original freq=643 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[01] original freq=643 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[02] original freq=643 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[03] original freq=643 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[04] original freq=643 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[05] original freq=643 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[06] original freq=643 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[07] original freq=643 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[08] original freq=643 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[09] original freq=643 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[10] original freq=643 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[11] original freq=643 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[12] original freq=643 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[13] original freq=643 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[14] original freq=643 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[15] original freq=643 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[16] original freq=643 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[17] original freq=643 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[18] original freq=643 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[19] original freq=643 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[20] original freq=643 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[21] original freq=643 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[22] original freq=643 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[23] original freq=643 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[24] original freq=643 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[25] original freq=643 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[26] original freq=643 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[27] original freq=643 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[28] original freq=643 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[29] original freq=643 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[30] original freq=643 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[31] original freq=643 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[32] original freq=643 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[33] original freq=643 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[34] original freq=643 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[35] original freq=643 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[36] original freq=643 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[37] original freq=643 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[38] original freq=643 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[39] original freq=643 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[40] original freq=643 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[41] original freq=643 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[42] original freq=643 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[43] original freq=643 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[44] original freq=643 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[45] original freq=643 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[46] original freq=643 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[47] original freq=643 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[48] original freq=643 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[49] original freq=643 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[50] original freq=643 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[51] original freq=643 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[52] original freq=643 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[53] original freq=643 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[54] original freq=643 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[55] original freq=643 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[56] original freq=643 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[57] original freq=643 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[58] original freq=643 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[59] original freq=643 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[60] original freq=643 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[61] original freq=643 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[62] original freq=643 adjusted freq:668
driver-btm-c5.c:13494:bitmain_c5_init: Chain[J6] has 0 asic
driver-btm-c5.c:13522:bitmain_c5_init: retry Chain[J6] has 0 asic
driver-btm-c5.c:13522:bitmain_c5_init: retry Chain[J6] has 0 asic
driver-btm-c5.c:13522:bitmain_c5_init: retry Chain[J6] has 0 asic
driver-btm-c5.c:13522:bitmain_c5_init: retry Chain[J6] has 0 asic
driver-btm-c5.c:13522:bitmain_c5_init: retry Chain[J6] has 0 asic
driver-btm-c5.c:13522:bitmain_c5_init: retry Chain[J6] has 0 asic
driver-btm-c5.c:13494:bitmain_c5_init: Chain[J8] has 51 asic
driver-btm-c5.c:13522:bitmain_c5_init: retry Chain[J8] has 51 asic
driver-btm-c5.c:13522:bitmain_c5_init: retry Chain[J8] has 52 asic
driver-btm-c5.c:13522:bitmain_c5_init: retry Chain[J8] has 51 asic
driver-btm-c5.c:13522:bitmain_c5_init: retry Chain[J8] has 52 asic
driver-btm-c5.c:13522:bitmain_c5_init: retry Chain[J8] has 52 asic
driver-btm-c5.c:13522:bitmain_c5_init: retry Chain[J8] has 52 asic
driver-btm-c5.c:4543:set_frequency: Chain[J8] has core num in PIC
driver-btm-c5.c:4553:set_frequency: Chain[J8] ASIC[0] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J8] ASIC[1] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J8] ASIC[2] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J8] ASIC[3] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J8] ASIC[4] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J8] ASIC[5] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J8] ASIC[6] has core num=2
driver-btm-c5.c:4553:set_frequency: Chain[J8] ASIC[8] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J8] ASIC[9] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J8] ASIC[10] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J8] ASIC[11] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J8] ASIC[12] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J8] ASIC[13] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J8] ASIC[15] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J8] ASIC[18] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J8] ASIC[19] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J8] ASIC[31] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J8] ASIC[39] has core num=2
driver-btm-c5.c:4553:set_frequency: Chain[J8] ASIC[42] has core num=15
driver-btm-c5.c:4553:set_frequency: Chain[J8] ASIC[43] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J8] ASIC[44] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J8] ASIC[47] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J8] ASIC[57] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J8] ASIC[58] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J8] ASIC[59] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J8] ASIC[60] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J8] ASIC[61] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J8] ASIC[62] has core num=2
driver-btm-c5.c:4583:set_frequency: miner total rate=4701GH/s ideal_total_hash_rate = 4500GH/s
driver-btm-c5.c:4608:set_frequency: read PIC voltage=910 on chain[7]
driver-btm-c5.c:4610:set_frequency: Chain:7 chipnum=52
driver-btm-c5.c:4630:set_frequency: Chain[J8] voltage added=0.0V
driver-btm-c5.c:4780:set_frequency: Chain:7 temp offset=-5
driver-btm-c5.c:4785:set_frequency: Chain:7 base freq=643
Asic[ 0]:668 Asic[ 1]:668 Asic[ 2]:668 Asic[ 3]:668 Asic[ 4]:668 Asic[ 5]:668 Asic[ 6]:668 Asic[ 7]:668 
Asic[ 8]:668 Asic[ 9]:668 Asic[10]:668 Asic[11]:668 Asic[12]:668 Asic[13]:668 Asic[14]:668 Asic[15]:668 
Asic[16]:668 Asic[17]:668 Asic[18]:668 Asic[19]:668 Asic[20]:668 Asic[21]:668 Asic[22]:668 Asic[23]:668 
Asic[24]:668 Asic[25]:668 Asic[26]:668 Asic[27]:668 Asic[28]:668 Asic[29]:668 Asic[30]:668 Asic[31]:668 
Asic[32]:668 Asic[33]:668 Asic[34]:668 Asic[35]:668 Asic[36]:668 Asic[37]:668 Asic[38]:668 Asic[39]:668 
Asic[40]:668 Asic[41]:668 Asic[42]:668 Asic[43]:668 Asic[44]:668 Asic[45]:668 Asic[46]:668 Asic[47]:668 
Asic[48]:668 Asic[49]:668 Asic[50]:668 Asic[51]:668 
driver-btm-c5.c:4821:set_frequency: Chain:7 max freq=668
driver-btm-c5.c:4822:set_frequency: Chain:7 min freq=668


driver-btm-c5.c:4831:set_frequency: Miner fix freq …
driver-btm-c5.c:4866:set_frequency: read PIC voltage=910 on chain[7]
driver-btm-c5.c:4867:set_frequency: Chain:7 chipnum=52
driver-btm-c5.c:4886:set_frequency: Chain[J8] voltage added=0.0V
driver-btm-c5.c:5070:set_frequency: Chain:7 temp offset=-5
driver-btm-c5.c:5075:set_frequency: Chain:7 base freq=643
Asic[ 0]:668 Asic[ 1]:668 Asic[ 2]:668 Asic[ 3]:668 Asic[ 4]:668 Asic[ 5]:668 Asic[ 6]:668 Asic[ 7]:668 
Asic[ 8]:668 Asic[ 9]:668 Asic[10]:668 Asic[11]:668 Asic[12]:668 Asic[13]:668 Asic[14]:668 Asic[15]:668 
Asic[16]:668 Asic[17]:668 Asic[18]:668 Asic[19]:668 Asic[20]:668 Asic[21]:668 Asic[22]:668 Asic[23]:668 
Asic[24]:668 Asic[25]:668 Asic[26]:668 Asic[27]:668 Asic[28]:668 Asic[29]:668 Asic[30]:668 Asic[31]:668 
Asic[32]:668 Asic[33]:668 Asic[34]:668 Asic[35]:668 Asic[36]:668 Asic[37]:668 Asic[38]:668 Asic[39]:668 
Asic[40]:668 Asic[41]:668 Asic[42]:668 Asic[43]:668 Asic[44]:668 Asic[45]:668 Asic[46]:668 Asic[47]:668 
Asic[48]:668 Asic[49]:668 Asic[50]:668 Asic[51]:668 
driver-btm-c5.c:5122:set_frequency: Chain:7 max freq=668
driver-btm-c5.c:5123:set_frequency: Chain:7 min freq=668

driver-btm-c5.c:5131:set_frequency: max freq = 668
driver-btm-c5.c:4149:ProcessFixFreq: totalRate = 4701, fixed_totalRate = 4500
driver-btm-c5.c:9614:init_uart_baud: set baud=1
driver-btm-c5.c:12129:set_working_voltage: setting to working voltage…
driver-btm-c5.c:12109:slowly_downgrade_voltage_all_chain: chain[7] set voltage to 900
driver-btm-c5.c:12109:slowly_downgrade_voltage_all_chain: chain[7] set voltage to 890
driver-btm-c5.c:14027:bitmain_c5_init: start thread for read temp
setStartTimePoint total_tv_start_sys=165 total_tv_end_sys=166
driver-btm-c5.c:10330:check_system_work: restartNum = 2 , auto-reinit enabled…
util.c:3207:initiate_stratum: mining.subscribe:{«id»: 0, «method»: «mining.subscribe», «params»: [«bmminer/2.0.0/Antminer S9/9000»]}
util.c:3207:initiate_stratum: mining.subscribe:{«id»: 1, «method»: «mining.subscribe», «params»: [«bmminer/2.0.0/Antminer S9/9000»]}
util.c:3207:initiate_stratum: mining.subscribe:{«id»: 2, «method»: «mining.subscribe», «params»: [«bmminer/2.0.0/Antminer S9/9000»]}
driver-btm-c5.c:8738:read_temp_func: bring_up_pcb_temp = -100
driver-btm-c5.c:9897:if_avg_hash_ok: avg hash rate = 195.675686, ideal hash rate = 4500
driver-btm-c5.c:10420:check_system_work: hash rate is low…
driver-btm-c5.c:15703:re_open_core: re_open_core enter
driver-btm-c5.c:15802:re_open_core: Before read Chain[J6] org chain_voltage_pic=91]
driver-btm-c5.c:15808:re_open_core: After read Chain[J6] new chain_voltage_pic=57 read pic=57
btm_adjust_hash.c:937:adjust_vol: Chain[J6] original vol value=890 adjusted vol value:900
btm_adjust_hash.c:285:btm_dynamic_adjust_vol: Chain[J6] [org chain_voltage_pic=57 value=910] [new chain_voltage_pic=74 value=900]
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[00] original freq=656 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[01] original freq=656 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[02] original freq=656 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[03] original freq=656 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[04] original freq=656 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[05] original freq=656 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[06] original freq=656 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[07] original freq=656 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[08] original freq=656 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[09] original freq=656 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[10] original freq=656 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[11] original freq=656 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[12] original freq=656 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[13] original freq=656 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[14] original freq=656 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[15] original freq=656 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[16] original freq=656 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[17] original freq=656 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[18] original freq=656 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[19] original freq=656 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[20] original freq=656 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[21] original freq=656 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[22] original freq=656 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[23] original freq=656 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[24] original freq=656 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[25] original freq=656 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[26] original freq=656 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[27] original freq=656 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[28] original freq=656 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[29] original freq=656 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[30] original freq=656 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[31] original freq=656 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[32] original freq=656 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[33] original freq=656 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[34] original freq=656 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[35] original freq=656 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[36] original freq=656 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[37] original freq=656 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[38] original freq=656 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[39] original freq=656 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[40] original freq=656 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[41] original freq=656 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[42] original freq=656 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[43] original freq=656 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[44] original freq=656 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[45] original freq=656 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[46] original freq=656 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[47] original freq=656 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[48] original freq=656 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[49] original freq=656 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[50] original freq=656 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[51] original freq=656 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[52] original freq=656 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[53] original freq=656 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[54] original freq=656 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[55] original freq=656 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[56] original freq=656 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[57] original freq=656 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[58] original freq=656 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[59] original freq=656 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[60] original freq=656 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[61] original freq=656 adjusted freq:656
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[62] original freq=656 adjusted freq:656
driver-btm-c5.c:15802:re_open_core: Before read Chain[J8] org chain_voltage_pic=91]
driver-btm-c5.c:15808:re_open_core: After read Chain[J8] new chain_voltage_pic=91 read pic=91
btm_adjust_hash.c:937:adjust_vol: Chain[J8] original vol value=890 adjusted vol value:900
btm_adjust_hash.c:285:btm_dynamic_adjust_vol: Chain[J8] [org chain_voltage_pic=91 value=890] [new chain_voltage_pic=74 value=900]
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[00] original freq=668 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[01] original freq=668 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[02] original freq=668 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[03] original freq=668 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[04] original freq=668 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[05] original freq=668 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[06] original freq=668 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[07] original freq=668 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[08] original freq=668 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[09] original freq=668 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[10] original freq=668 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[11] original freq=668 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[12] original freq=668 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[13] original freq=668 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[14] original freq=668 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[15] original freq=668 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[16] original freq=668 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[17] original freq=668 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[18] original freq=668 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[19] original freq=668 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[20] original freq=668 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[21] original freq=668 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[22] original freq=668 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[23] original freq=668 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[24] original freq=668 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[25] original freq=668 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[26] original freq=668 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[27] original freq=668 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[28] original freq=668 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[29] original freq=668 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[30] original freq=668 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[31] original freq=668 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[32] original freq=668 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[33] original freq=668 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[34] original freq=668 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[35] original freq=668 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[36] original freq=668 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[37] original freq=668 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[38] original freq=668 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[39] original freq=668 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[40] original freq=668 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[41] original freq=668 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[42] original freq=668 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[43] original freq=668 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[44] original freq=668 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[45] original freq=668 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[46] original freq=668 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[47] original freq=668 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[48] original freq=668 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[49] original freq=668 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[50] original freq=668 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[51] original freq=668 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[52] original freq=668 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[53] original freq=668 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[54] original freq=668 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[55] original freq=668 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[56] original freq=668 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[57] original freq=668 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[58] original freq=668 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[59] original freq=668 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[60] original freq=668 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[61] original freq=668 adjusted freq:668
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[62] original freq=668 adjusted freq:668
driver-btm-c5.c:15886:re_open_core: Chain[J6] has 0 asic
driver-btm-c5.c:15890:re_open_core: i = 5, retry_count = 0, dev->chain_asic_num = 0
driver-btm-c5.c:15913:re_open_core: retry Chain[J6] has 0 asic
driver-btm-c5.c:15890:re_open_core: i = 5, retry_count = 1, dev->chain_asic_num = 0
driver-btm-c5.c:15913:re_open_core: retry Chain[J6] has 0 asic
driver-btm-c5.c:15890:re_open_core: i = 5, retry_count = 2, dev->chain_asic_num = 0
driver-btm-c5.c:15913:re_open_core: retry Chain[J6] has 0 asic
driver-btm-c5.c:15890:re_open_core: i = 5, retry_count = 3, dev->chain_asic_num = 0
driver-btm-c5.c:15913:re_open_core: retry Chain[J6] has 0 asic
driver-btm-c5.c:15890:re_open_core: i = 5, retry_count = 4, dev->chain_asic_num = 0
driver-btm-c5.c:15913:re_open_core: retry Chain[J6] has 0 asic
driver-btm-c5.c:15890:re_open_core: i = 5, retry_count = 5, dev->chain_asic_num = 0
driver-btm-c5.c:15913:re_open_core: retry Chain[J6] has 0 asic
driver-btm-c5.c:15890:re_open_core: i = 5, retry_count = 6, dev->chain_asic_num = 0
driver-btm-c5.c:15913:re_open_core: retry Chain[J6] has 0 asic
driver-btm-c5.c:15890:re_open_core: i = 5, retry_count = 7, dev->chain_asic_num = 0
driver-btm-c5.c:15913:re_open_core: retry Chain[J6] has 0 asic
driver-btm-c5.c:15890:re_open_core: i = 5, retry_count = 8, dev->chain_asic_num = 0
driver-btm-c5.c:15913:re_open_core: retry Chain[J6] has 0 asic
driver-btm-c5.c:15890:re_open_core: i = 5, retry_count = 9, dev->chain_asic_num = 0
driver-btm-c5.c:15913:re_open_core: retry Chain[J6] has 0 asic
driver-btm-c5.c:15890:re_open_core: i = 5, retry_count = 10, dev->chain_asic_num = 0
driver-btm-c5.c:15913:re_open_core: retry Chain[J6] has 0 asic
driver-btm-c5.c:15890:re_open_core: i = 5, retry_count = 11, dev->chain_asic_num = 0
driver-btm-c5.c:15913:re_open_core: retry Chain[J6] has 0 asic
driver-btm-c5.c:15890:re_open_core: i = 5, retry_count = 12, dev->chain_asic_num = 0
driver-btm-c5.c:15913:re_open_core: retry Chain[J6] has 0 asic
driver-btm-c5.c:15890:re_open_core: i = 5, retry_count = 13, dev->chain_asic_num = 0
driver-btm-c5.c:15913:re_open_core: retry Chain[J6] has 0 asic
driver-btm-c5.c:15890:re_open_core: i = 5, retry_count = 14, dev->chain_asic_num = 0
driver-btm-c5.c:15913:re_open_core: retry Chain[J6] has 0 asic
driver-btm-c5.c:15890:re_open_core: i = 5, retry_count = 15, dev->chain_asic_num = 0
driver-btm-c5.c:15913:re_open_core: retry Chain[J6] has 0 asic
driver-btm-c5.c:15890:re_open_core: i = 5, retry_count = 16, dev->chain_asic_num = 0
driver-btm-c5.c:15913:re_open_core: retry Chain[J6] has 0 asic
driver-btm-c5.c:15890:re_open_core: i = 5, retry_count = 17, dev->chain_asic_num = 0
driver-btm-c5.c:15913:re_open_core: retry Chain[J6] has 0 asic
driver-btm-c5.c:15890:re_open_core: i = 5, retry_count = 18, dev->chain_asic_num = 0
driver-btm-c5.c:15913:re_open_core: retry Chain[J6] has 0 asic
driver-btm-c5.c:15890:re_open_core: i = 5, retry_count = 19, dev->chain_asic_num = 0
driver-btm-c5.c:15913:re_open_core: retry Chain[J6] has 0 asic
driver-btm-c5.c:15886:re_open_core: Chain[J8] has 62 asic
driver-btm-c5.c:15890:re_open_core: i = 7, retry_count = 0, dev->chain_asic_num = 62
do read_temp_func once…

get RT hashrate from Chain[7]: (asic index start from 1-63)
Asic[01]=0.00000 Asic[02]=71.6550 Asic[03]=469.762 Asic[04]=0.00000 Asic[05]=0.00000 Asic[06]=0.00000 Asic[07]=0.00000 Asic[08]=0.00000 
Asic[09]=352.321 Asic[10]=0.00000 Asic[11]=0.00000 Asic[12]=55.1290 Asic[13]=0.00000 Asic[14]=0.00000 Asic[15]=0.00000 Asic[16]=0.00000 
Asic[17]=0.00000 Asic[18]=4.19400 Asic[19]=0.00000 Asic[20]=2.81800 Asic[21]=0.00000 Asic[22]=0.00000 Asic[23]=0.00000 Asic[24]=0.00000 
Asic[25]=3.37200 Asic[26]=0.00000 Asic[27]=0.00000 Asic[28]=0.00000 Asic[29]=0.00000 Asic[30]=0.00000 Asic[31]=19.2430 Asic[32]=0.00000 
Asic[33]=8.05300 Asic[34]=0.00000 Check Chain[J8] ASIC RT error: (asic index start from 1-63)
Asic[03]=469.762000
Asic[09]=352.321000
Asic[45]=4094459.465000
Done check_asic_reg
Done read temp on Chain[7]
Max pcb temp : -100
set FAN speed according to: temp_highest=-100 temp_top1[PWM_T]=-100 temp_top1[TEMP_POS_LOCAL]=-100 temp_change=0 fix_fan_steps=0
FAN PWM: 0
read_temp_func Done!
CRC error counter=176
 


Go to BITMAIN


r/BITMAIN

BITMAIN is the world’s leading manufacturer of cryptocurrency mining servers through its brand ANTMINER, which has long maintained a global market share and leading position in technology, serving customers across over 100 countries and regions. The company has subsidiaries in China, the United States, Singapore, Malaysia, Kazakhstan, and other locations.




Members





Online



Antminer S9 has no mining status

I setup my S9 today and got the latest firmware and yet nothing will show up in my Mining status screen, not even my fan speed. Is this normal? I haven’t been able to start hashing either. Is it possible that my ISP is blocking my pooling site? It’s been a few hours since it was set up.

UPDATE: It finally works. The last things I did before it worked were: removing the stratum+tcp in the pool url, changing my router into an AP as it was double NAT’d(hopefully I can change this back?), and firmware flashing it multiple times. Thanks for all the help!

.
.
[   30.603875] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
This is XILINX board. Totalram:       507527168
Detect 512MB control board of XILINX
DETECT HW version=0008c510
miner ID : 80641d2e2420881c
Miner Type = S9
AsicType = 1387
real AsicNum = 63
use critical mode to search freq…
get PLUG ON=0x000000c0
Find hashboard on Chain[6]
Find hashboard on Chain[7]
set_reset_allhashboard = 0x0000ffff
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[6] has freq in PIC and will jump over…
Chain[6] has core num in PIC
Chain[6] ASIC[39] has core num=1
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[7] has freq in PIC and will jump over…
Chain[7] has core num in PIC
Chain[7] ASIC[37] has core num=1
Check chain[7] PIC fw version=0x03
get PIC voltage=125 on chain[6], value=870
get PIC voltage=6 on chain[7], value=940
set_reset_allhashboard = 0x00000000
chain[6] temp offset record: 62,0,0,0,0,0,35,28
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
chain[7] temp offset record: 62,0,0,0,0,0,35,28
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
CRC error counter=0
set command mode to VIL

— check asic number
After Get ASIC NUM CRC error counter=0
set_baud=0
The min freq=700
set real timeout 52, need sleep=379392
After TEST CRC error counter=0
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
search freq for 1 times, completed chain = 2, total chain num = 2
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found= 1373 root       0:00 grep bmminer

bmminer not found, restart bmminer …
This is user mode for mining
Detect 512MB control board of XILINX
Miner Type = S9
Miner compile time: Fri Nov 17 17:57:49 CST 2017 type: Antminer S9set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
miner ID : 80641d2e2420881c
set_reset_allhashboard = 0x0000ffff
Checking fans!get fan[2] speed=4560
get fan[2] speed=4560
get fan[2] speed=4560
get fan[2] speed=4560
get fan[2] speed=4560
get fan[2] speed=4560
get fan[2] speed=4560
get fan[2] speed=4560
get fan[2] speed=4560
get fan[5] speed=6120
get fan[2] speed=4560
get fan[5] speed=6120
get fan[2] speed=4560
get fan[5] speed=6120
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J7] has backup chain_voltage=870
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J8] has backup chain_voltage=870
Check chain[7] PIC fw version=0x03
Chain[J7] orignal chain_voltage_pic=125 value=870
Chain[J8] orignal chain_voltage_pic=6 value=940
Chain[J8] will use backup chain_voltage_pic=870 [125]
Chain[J8] get working chain_voltage_pic=125
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
Chain[J7] has 63 asic
Chain[J8] has 63 asic
Chain[J7] has core num in PIC
Chain[J7] ASIC[39] has core num=1
Chain[J8] has core num in PIC
Chain[J8] ASIC[37] has core num=1
miner total rate=9335GH/s fixed rate=9000GH/s
read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=650
Asic[ 0]:650
Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650 Asic[ 8]:650
Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650 Asic[16]:650
Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650 Asic[24]:650
Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650 Asic[32]:650
Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650 Asic[40]:650
Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:650 Asic[47]:650 Asic[48]:650
Asic[49]:650 Asic[50]:650 Asic[51]:650 Asic[52]:650 Asic[53]:650 Asic[54]:650 Asic[55]:650 Asic[56]:650
Asic[57]:650 Asic[58]:650 Asic[59]:650 Asic[60]:650 Asic[61]:650 Asic[62]:650
Chain:6 max freq=650
Chain:6 min freq=650

read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=650
Asic[ 0]:650
Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650 Asic[ 8]:650
Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650 Asic[16]:650
Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650 Asic[24]:650
Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650 Asic[32]:650
Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650 Asic[40]:650
Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:650 Asic[47]:650 Asic[48]:650
Asic[49]:650 Asic[50]:650 Asic[51]:650 Asic[52]:650 Asic[53]:650 Asic[54]:650 Asic[55]:650 Asic[56]:650
Asic[57]:650 Asic[58]:650 Asic[59]:650 Asic[60]:650 Asic[61]:650 Asic[62]:650
Chain:7 max freq=650
Chain:7 min freq=650

Miner fix freq …
read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=650
Asic[ 0]:650
Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650 Asic[ 8]:650
Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650 Asic[16]:650
Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650 Asic[24]:650
Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650 Asic[32]:650
Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650 Asic[40]:650
Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:650 Asic[47]:650 Asic[48]:650
Asic[49]:650 Asic[50]:650 Asic[51]:650 Asic[52]:650 Asic[53]:650 Asic[54]:650 Asic[55]:650 Asic[56]:650
Asic[57]:650 Asic[58]:650 Asic[59]:650 Asic[60]:650 Asic[61]:650 Asic[62]:650
Chain:6 max freq=650
Chain:6 min freq=650

read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=650
Asic[ 0]:650
Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650 Asic[ 8]:650
Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650 Asic[16]:650
Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650 Asic[24]:650
Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650 Asic[32]:650
Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650 Asic[40]:650
Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:650 Asic[47]:650 Asic[48]:650
Asic[49]:650 Asic[50]:650 Asic[51]:650 Asic[52]:650 Asic[53]:650 Asic[54]:650 Asic[55]:650 Asic[56]:650
Asic[57]:650 Asic[58]:650 Asic[59]:650 Asic[60]:650 Asic[61]:650 Asic[62]:650
Chain:7 max freq=650
Chain:7 min freq=650

max freq = 650
set baud=1
Chain[J7] PIC temp offset=62,0,0,0,0,0,35,28
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
Chain[J7] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[6] chip[244] local:23 remote:26 offset:26
Chain[J7] chip[244] get middle temp offset=26 typeID=55
Chain[J8] PIC temp offset=62,0,0,0,0,0,35,28
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
Chain[J8] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[7] chip[244] local:23 remote:26 offset:26
Chain[J8] chip[244] get middle temp offset=26 typeID=55
Chain[J7] set working voltage=870 [125]
Chain[J8] set working voltage=870 [125]
do heat board 8xPatten for 1 times
start send works on chain[6]
start send works on chain[7]
get send work num :57456 on Chain[6]
get send work num :57456 on Chain[7]
wait recv nonce on chain[6]
wait recv nonce on chain[7]
get nonces on chain[6]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912

Below ASIC’s core didn’t receive all the nonce, they should receive 8 nonce each!

freq[00]=650 freq[01]=650 freq[02]=650 freq[03]=650 freq[04]=650 freq[05]=650 freq[06]=650 freq[07]=650
freq[08]=650 freq[09]=650 freq[10]=650 freq[11]=650 freq[12]=650 freq[13]=650 freq[14]=650 freq[15]=650
freq[16]=650 freq[17]=650 freq[18]=650 freq[19]=650 freq[20]=650 freq[21]=650 freq[22]=650 freq[23]=650
freq[24]=650 freq[25]=650 freq[26]=650 freq[27]=650 freq[28]=650 freq[29]=650 freq[30]=650 freq[31]=650
freq[32]=650 freq[33]=650 freq[34]=650 freq[35]=650 freq[36]=650 freq[37]=650 freq[38]=650 freq[39]=650
freq[40]=650 freq[41]=650 freq[42]=650 freq[43]=650 freq[44]=650 freq[45]=650 freq[46]=650 freq[47]=650
freq[48]=650 freq[49]=650 freq[50]=650 freq[51]=650 freq[52]=650 freq[53]=650 freq[54]=650 freq[55]=650
freq[56]=650 freq[57]=650 freq[58]=650 freq[59]=650 freq[60]=650 freq[61]=650 freq[62]=650

total valid nonce number:57456
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:26639
last_nonce_num:29040
get nonces on chain[7]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912

Below ASIC’s core didn’t receive all the nonce, they should receive 8 nonce each!

freq[00]=650 freq[01]=650 freq[02]=650 freq[03]=650 freq[04]=650 freq[05]=650 freq[06]=650 freq[07]=650
freq[08]=650 freq[09]=650 freq[10]=650 freq[11]=650 freq[12]=650 freq[13]=650 freq[14]=650 freq[15]=650
freq[16]=650 freq[17]=650 freq[18]=650 freq[19]=650 freq[20]=650 freq[21]=650 freq[22]=650 freq[23]=650
freq[24]=650 freq[25]=650 freq[26]=650 freq[27]=650 freq[28]=650 freq[29]=650 freq[30]=650 freq[31]=650
freq[32]=650 freq[33]=650 freq[34]=650 freq[35]=650 freq[36]=650 freq[37]=650 freq[38]=650 freq[39]=650
freq[40]=650 freq[41]=650 freq[42]=650 freq[43]=650 freq[44]=650 freq[45]=650 freq[46]=650 freq[47]=650
freq[48]=650 freq[49]=650 freq[50]=650 freq[51]=650 freq[52]=650 freq[53]=650 freq[54]=650 freq[55]=650
freq[56]=650 freq[57]=650 freq[58]=650 freq[59]=650 freq[60]=650 freq[61]=650 freq[62]=650

total valid nonce number:57456
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:26627
last_nonce_num:33868
chain[6]: All chip cores are opened OK!
Test Patten on chain[6]: OK!
chain[7]: All chip cores are opened OK!
Test Patten on chain[7]: OK!
setStartTimePoint total_tv_start_sys=141 total_tv_end_sys=142
restartNum = 2 , auto-reinit enabled…
do read_temp_func once…
do check_asic_reg 0x08

get RT hashrate from Chain[6]: (asic index start from 1-63)
Asic[01]=121.618 Asic[02]=113.984 Asic[03]=116.165 Asic[04]=115.444 Asic[05]=117.474 Asic[06]=115.444 Asic[07]=116.534 Asic[08]=116.198
Asic[09]=116.819 Asic[10]=117.591 Asic[11]=115.125 Asic[12]=119.990 Asic[13]=116.014 Asic[14]=513.164 Asic[15]=115.712 Asic[16]=114.588
Asic[17]=118.044 Asic[18]=115.293 Asic[19]=400.203 Asic[20]=118.984 Asic[21]=119.554 Asic[22]=112.558 Asic[23]=118.145 Asic[24]=113.548
Asic[25]=116.752 Asic[26]=119.604 Asic[27]=117.893 Asic[28]=116.886 Asic[29]=131.617 Asic[30]=118.413 Asic[31]=111.383 Asic[32]=118.128
Asic[33]=111.753 Asic[34]=114.487 Asic[35]=116.198 Asic[36]=265.801 Asic[37]=119.621 Asic[38]=120.108 Asic[39]=114.504 Asic[40]=116.081
Asic[41]=115.477 Asic[42]=119.135 Asic[43]=115.964 Asic[44]=114.739 Asic[45]=664.595 Asic[46]=118.044 Asic[47]=116.568 Asic[48]=1559.01
Asic[49]=112.273 Asic[50]=116.048 Asic[51]=115.695 Asic[52]=120.712 Asic[53]=116.886 Asic[54]=117.541 Asic[55]=117.255 Asic[56]=118.279
Asic[57]=128.731 Asic[58]=115.561 Asic[59]=115.225 Asic[60]=115.527 Asic[61]=116.500 Asic[62]=115.125 Asic[63]=121.701

get RT hashrate from Chain[7]: (asic index start from 1-63)
Asic[01]=117.289 Asic[02]=112.692 Asic[03]=113.514 Asic[04]=110.628 Asic[05]=116.182 Asic[06]=111.904 Asic[07]=114.638 Asic[08]=116.819
Asic[09]=116.668 Asic[10]=114.252 Asic[11]=114.588 Asic[12]=115.997 Asic[13]=112.558 Asic[14]=484.727 Asic[15]=114.420 Asic[16]=111.702
Asic[17]=116.870 Asic[18]=114.118 Asic[19]=114.907 Asic[20]=114.001 Asic[21]=117.776 Asic[22]=111.635 Asic[23]=252.547 Asic[24]=110.343
Asic[25]=114.823 Asic[26]=116.266 Asic[27]=114.286 Asic[28]=113.212 Asic[29]=131.533 Asic[30]=114.403 Asic[31]=109.672 Asic[32]=112.357
Asic[33]=111.333 Asic[34]=111.132 Asic[35]=115.578 Asic[36]=114.336 Asic[37]=117.172 Asic[38]=116.282 Asic[39]=112.122 Asic[40]=628.944
Asic[41]=111.316 Asic[42]=119.621 Asic[43]=116.081 Asic[44]=114.621 Asic[45]=114.856 Asic[46]=119.168 Asic[47]=116.098 Asic[48]=1466.46
Asic[49]=108.833 Asic[50]=113.044 Asic[51]=114.370 Asic[52]=116.584 Asic[53]=114.051 Asic[54]=116.198 Asic[55]=115.175 Asic[56]=376.245
Asic[57]=127.741 Asic[58]=113.195 Asic[59]=118.178 Asic[60]=112.407 Asic[61]=214.714 Asic[62]=111.971 Asic[63]=118.749
Check Chain[J7] ASIC RT error: (asic index start from 1-63)
Asic[01]=121.618000
Asic[02]=113.984000
Asic[03]=116.165000
Asic[04]=115.444000
Asic[05]=117.474000
Asic[06]=115.444000
Asic[07]=116.534000
Asic[08]=116.198000
Asic[09]=116.819000
Asic[10]=117.591000
Asic[11]=115.125000
Asic[12]=119.990000
Asic[13]=116.014000
Asic[14]=513.164000
Asic[15]=115.712000
Asic[16]=114.588000
Asic[17]=118.044000
Asic[18]=115.293000
Asic[19]=400.203000
Asic[20]=118.984000
Asic[21]=119.554000
Asic[22]=112.558000
Asic[23]=118.145000
Asic[24]=113.548000
Asic[25]=116.752000
Asic[26]=119.604000
Asic[27]=117.893000
Asic[28]=116.886000
Asic[29]=131.617000
Asic[30]=118.413000
Asic[31]=111.383000
Asic[32]=118.128000
Asic[33]=111.753000
Asic[34]=114.487000
Asic[35]=116.198000
Asic[36]=265.801000
Asic[37]=119.621000
Asic[38]=120.108000
Asic[39]=114.504000
Asic[40]=116.081000
Asic[41]=115.477000
Asic[42]=119.135000
Asic[43]=115.964000
Asic[44]=114.739000
Asic[45]=664.595000
Asic[46]=118.044000
Asic[47]=116.568000
Asic[48]=1559.010000
Asic[49]=112.273000
Asic[50]=116.048000
Asic[51]=115.695000
Asic[52]=120.712000
Asic[53]=116.886000
Asic[54]=117.541000
Asic[55]=117.255000
Asic[56]=118.279000
Asic[57]=128.731000
Asic[58]=115.561000
Asic[59]=115.225000
Asic[60]=115.527000
Asic[61]=116.500000
Asic[62]=115.125000
Asic[63]=121.701000
Check Chain[J8] ASIC RT error: (asic index start from 1-63)
Asic[01]=117.289000
Asic[02]=112.692000
Asic[03]=113.514000
Asic[04]=110.628000
Asic[05]=116.182000
Asic[06]=111.904000
Asic[07]=114.638000
Asic[08]=116.819000
Asic[09]=116.668000
Asic[10]=114.252000
Asic[11]=114.588000
Asic[12]=115.997000
Asic[13]=112.558000
Asic[14]=484.727000
Asic[15]=114.420000
Asic[16]=111.702000
Asic[17]=116.870000
Asic[18]=114.118000
Asic[19]=114.907000
Asic[20]=114.001000
Asic[21]=117.776000
Asic[22]=111.635000
Asic[23]=252.547000
Asic[24]=110.343000
Asic[25]=114.823000
Asic[26]=116.266000
Asic[27]=114.286000
Asic[28]=113.212000
Asic[29]=131.533000
Asic[30]=114.403000
Asic[31]=109.672000
Asic[32]=112.357000
Asic[33]=111.333000
Asic[34]=111.132000
Asic[35]=115.578000
Asic[36]=114.336000
Asic[37]=117.172000
Asic[38]=116.282000
Asic[39]=112.122000
Asic[40]=628.944000
Asic[41]=111.316000
Asic[42]=119.621000
Asic[43]=116.081000
Asic[44]=114.621000
Asic[45]=114.856000
Asic[46]=119.168000
Asic[47]=116.098000
Asic[48]=1466.460000
Asic[49]=108.833000
Asic[50]=113.044000
Asic[51]=114.370000
Asic[52]=116.584000
Asic[53]=114.051000
Asic[54]=116.198000
Asic[55]=115.175000
Asic[56]=376.245000
Asic[57]=127.741000
Asic[58]=113.195000
Asic[59]=118.178000
Asic[60]=112.407000
Asic[61]=214.714000
Asic[62]=111.971000
Asic[63]=118.749000
Done check_asic_reg
do read temp on Chain[6]
Chain[6] Chip[62] TempTypeID=55 middle offset=26
Chain[6] Chip[62] local Temp=49
Chain[6] Chip[62] middle Temp=58
Special fix Chain[6] Chip[62] middle Temp = 64
Done read temp on Chain[6]
do read temp on Chain[7]
Chain[7] Chip[62] TempTypeID=55 middle offset=26
Chain[7] Chip[62] local Temp=50
Chain[7] Chip[62] middle Temp=59
Special fix Chain[7] Chip[62] middle Temp = 65
Done read temp on Chain[7]
read_temp_func Done!
CRC error counter=0

I don’t stand why now work, and some hours before no.

Forum rules
Welcome to the mining rig and connectivity support forum!

This forum is for discussing issues with mining rigs and connectivity issues with experienced PROHASHING miners. This is a great place to ask questions about connecting specific hardware to PROHASHING.

Remember, PROHASHING employees do not closely monitor the forums like we do the official support channels, so this forum’s purpose is to connect you with other PROHASHING miners who have experience with similar hardware/issues. If you have connectivity issues you are unable to resolve here on the forum, please submit a ticket through the official support channels.

For the full list of PROHASHING forums rules, please visit https://prohashing.com/help/prohashing- … rms-forums.

bluethundr

Posts: 31
Joined: Mon Nov 27, 2017 10:16 am

Re: S9 Not Reporting In

Steve Sokolowski wrote:

bluethundr wrote:I notice the connection on SHA-256 is more stable now. It’s lasting for longer amounts of time. However disconnects are still happening.

FYI

I have a theory. Could you provide us with your IP address, or, if you’re worried about attacks here, submit a ticket with it so I can investigate?

I don’t see any authorization attempts in the logs. All I see are a bunch of these errors. Like over a hundred of them:

Code: Select all

Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
do read_temp_func once...
do check_asic_reg 0x08

Just Fatal Error: network connection lost! over and over again in the logs. I don’t think it’s the network on my side causing the problem. Because I have 2 other miners hooked up to prohasing that don’t lose their connections. They’re on the same network as the S9.

I don’t mind sharing my IP address. Here it is: 199.207.253.101

That’s my external address.

Thanks

bluethundr

Posts: 31
Joined: Mon Nov 27, 2017 10:16 am

Re: S9 Not Reporting In

Post

by bluethundr » Tue Mar 20, 2018 12:08 am

It’s been stable for a while tonight. Like a few hours. Then I tried adding the power settings. My password line read like this for a little while:

Then it reported into PH and lasted about a minute. Then started disconnecting. The status page on my miner showed the connection as «Dead».

I tried reverting the setting to just:

On the password line. But even after reverting to what I had before that worked (for a little while), the connection remains «Dead» on my miner. Tried restarting the miner. Same thing. Connection reads «Dead» on the status page.

Miner fell back to the second in line which is https://dgb-sha.theblocksfactory.com, I used them to mine Digibyte.

Then a few minutes later my PH connection came live. Registered as as SHA-256 machine at the top of the page and started displaying a coin, and calculating a hash rate. Be interesting to see if it drops off again.

It seems like it was stable on there for a while. But then it couldn’t handle the power settings and that broke the connection again.

User avatar

Steve Sokolowski

Posts: 4585
Joined: Wed Aug 27, 2014 3:27 pm
Location: State College, PA

Re: S9 Not Reporting In

Post

by Steve Sokolowski » Tue Mar 20, 2018 10:37 am

bluethundr wrote:It’s been stable for a while tonight. Like a few hours. Then I tried adding the power settings. My password line read like this for a little while:

Then it reported into PH and lasted about a minute. Then started disconnecting. The status page on my miner showed the connection as «Dead».

I tried reverting the setting to just:

On the password line. But even after reverting to what I had before that worked (for a little while), the connection remains «Dead» on my miner. Tried restarting the miner. Same thing. Connection reads «Dead» on the status page.

Miner fell back to the second in line which is https://dgb-sha.theblocksfactory.com, I used them to mine Digibyte.

Then a few minutes later my PH connection came live. Registered as as SHA-256 machine at the top of the page and started displaying a coin, and calculating a hash rate. Be interesting to see if it drops off again.

It seems like it was stable on there for a while. But then it couldn’t handle the power settings and that broke the connection again.

Thanks for that. I don’t think the power settings are related to this issue. I think it was related to Bitcoin Cash mining. Has the issue been resolved now?

bluethundr

Posts: 31
Joined: Mon Nov 27, 2017 10:16 am

Re: S9 Not Reporting In

Post

by bluethundr » Tue Mar 20, 2018 11:25 am

Steve Sokolowski wrote:

bluethundr wrote:It’s been stable for a while tonight. Like a few hours. Then I tried adding the power settings. My password line read like this for a little while:

Then it reported into PH and lasted about a minute. Then started disconnecting. The status page on my miner showed the connection as «Dead».

I tried reverting the setting to just:

On the password line. But even after reverting to what I had before that worked (for a little while), the connection remains «Dead» on my miner. Tried restarting the miner. Same thing. Connection reads «Dead» on the status page.

Miner fell back to the second in line which is https://dgb-sha.theblocksfactory.com, I used them to mine Digibyte.

Then a few minutes later my PH connection came live. Registered as as SHA-256 machine at the top of the page and started displaying a coin, and calculating a hash rate. Be interesting to see if it drops off again.

It seems like it was stable on there for a while. But then it couldn’t handle the power settings and that broke the connection again.

Thanks for that. I don’t think the power settings are related to this issue. I think it was related to Bitcoin Cash mining. Has the issue been resolved now?

OK. It’s been stable all morning. The miners are at home and I’m at work now. I’ll try adding the power settings back into the password line tonight when I get home. Let’s see if it stays connected once I do that. I’ll let you know!

Thanks

bluethundr

Posts: 31
Joined: Mon Nov 27, 2017 10:16 am

Re: S9 Not Reporting In

Post

by bluethundr » Tue Mar 20, 2018 8:01 pm

OK, I added the power settings back into the password argument on my S9. So, now it reads:

I’ll let you know if it drops off again. Tho I suspect we’re good!

Thanks

bluethundr

Posts: 31
Joined: Mon Nov 27, 2017 10:16 am

Re: S9 Not Reporting In

Post

by bluethundr » Wed Mar 21, 2018 10:35 am

Hi Steve,

The S9 has been connected with no drops since yesterday. I added back the power settings to the password line. No disconnects since I did that.

Thanks for resolving the issue! What was the problem that was causing this?

Thanks

Zav

Posts: 3
Joined: Mon Mar 26, 2018 1:46 pm

Re: S9 Not Reporting In

Post

by Zav » Tue Mar 27, 2018 4:31 pm

Hi.
the problem actually exists.
today I tried simultaneously with the L3+ to connect and S9 on one account.
L3+ works and S9 shows «Dead»…

creader

Posts: 16
Joined: Mon Jul 09, 2018 10:35 am

Re: S9 Not Reporting In

Post

by creader » Fri Aug 10, 2018 6:32 am

Hi,

i have nearly the same problem only when i tried to mine TEACOIN

my Pass looks like m=solo c=Teacoin n=teasolo

my log in s9 miner says Fatal Error: network connection lost!

other coins working fine only teacoin….please need help

thanks

User avatar

Steve Sokolowski

Posts: 4585
Joined: Wed Aug 27, 2014 3:27 pm
Location: State College, PA

Re: S9 Not Reporting In

Post

by Steve Sokolowski » Fri Aug 10, 2018 10:25 am

creader wrote:Hi,

i have nearly the same problem only when i tried to mine TEACOIN

my Pass looks like m=solo c=Teacoin n=teasolo

my log in s9 miner says Fatal Error: network connection lost!

other coins working fine only teacoin….please need help

thanks

What error are you receiving from the mining.authorize() statement in the logs?

If you’re trying to mine Teacoins, a common error would be that you’re submitting too many stale shares, and therefore were banned. Since there are so many miners mining Teacoins, about 98% of the shares for that coin are stale because the blocks are coming faster than network latency.

creader

Posts: 16
Joined: Mon Jul 09, 2018 10:35 am

Re: S9 Not Reporting In

Post

by creader » Fri Aug 10, 2018 11:53 am

Thanks for your reply.

ok this error with stale i can imagine. Is there anyway to fix this problem?

i tried to find the mining.authorize() statement, but i’m not realy know how i can find this. In my «normal» log of the S9 i can’t find anything like this.

thanks

  • Re2 exe неустранимая ошибка приложения 0x887a0006
  • Read handshake record ошибка
  • Re00w ошибка батареи hp
  • Read from disk ошибка торрента как исправить
  • React сообщение об ошибке