W32tm icmp ошибка 0x8007271d

  • Remove From My Forums

  • Вопрос

  • Есть 2 контроллера домена. На первом (PDC) настроена синхронизация времени NTP на маршрутизатор Cisco, на которой поднят сервер NTP.

    По незнанию решил настроить вторичный DC на ту же Cisco.

    w32tm /config /manualpeerlist:192.168.1.254 /syncfromflags:manual /reliable:yes /update 
    net stop w32time 
    net start w32time
    w32tm /resync
    Отправка команды синхронизации на локальный компьютер
    The computer did not resync because no time data was available.

    Итог:
    w32tm /query /source
    Local CMOS Clock

    C:Windowssystem32>w32tm /monitor
     главный DC *** PDC ***[192.168.1.1:123]: 
    ICMP: 1ms delay
    NTP: +0.0000000s offset from SRV001.SMRFMBA.local
    RefID: (unknown) [0xFE01A8C0]
    Stratum: 9
     вторичный DC[[::1]:123]: 
    ICMP: 0ms delay
    NTP: -4.5039986s offset from главный DC

    RefID: ‘LOCL’ [0x4C434F4C]
    Stratum: 1

    Warning:
    Reverse name resolution is best effort. It may not be
    correct since RefID field in time packets differs across
    NTP implementations and may not be using IP addresses.

    C:Windowssystem32>w32tm /query /peers
    #Узлы: 1

    Peer: 192.168.1.254
    State: Active
    Time Remaining: 25.2027319s
    Mode: 1 (Symmetric Active)
    Stratum: 0 (unspecified)
    PeerPoll Interval: 0 (unspecified)
    HostPoll Interval: 6 (64s)

    Как вернуть все как было. Что бы вторичный DC получал время от первичного DC?

Ответы

  • Добавлю еще рекомендуемую
    литературу для обязательного прочтения, и напомню о том, что не важно от используемой Вами среды виртуализации, в настройках виртуальной машины с
    контроллером домена синхронизацию времени необходимо убрать.

    • Предложено в качестве ответа

      9 октября 2013 г. 12:48

    • Помечено в качестве ответа
      Petko KrushevMicrosoft contingent staff
      10 октября 2013 г. 11:13
  • Remove From My Forums

  • Question

  • could somebody help with the error  (see pic). It is in the lab domain.

    «When you hit a wrong note it’s the next note that makes it good or bad». Miles Davis

Answers

  • Hello,

    Please refer this:

    Configuring Windows Time for Active Directory
    http://tigermatt.wordpress.com/2009/08/01/windows-time-for-active-directory/

    http://technet.microsoft.com/en-us/library/cc794937(v=ws.10).aspx

    Check system logs for any errors and update.

    For others, i have zoomed  the image. 

    Devaraj G | Technical solution architect

    • Marked as answer by

      Wednesday, August 14, 2013 12:21 AM

  • Hello,

    how in detail is your time setup configured? Port 123 UDP MUST be open for time sync.

    If that machine is the PDCEmulator, your screenshot is too small to view, assure it is configured to a NOT domain time source or the local CMOS(not recommended) from the command line with w32tm. There is no need for manual changes in the registry.

    Details about the domain time configuration please see in
    http://msmvps.com/blogs/mweber/archive/2010/06/27/time-configuration-in-a-windows-domain.aspx

    Best regards

    Meinolf Weber
    MVP, MCP, MCTS
    Microsoft MVP — Directory Services
    My Blog: http://msmvps.com/blogs/mweber/

    Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.

    • Proposed as answer by
      Ace Fekay [MCT]
      Monday, August 12, 2013 10:10 PM
    • Marked as answer by
      pob579
      Wednesday, August 14, 2013 12:21 AM
    • Marked as answer by
      pob579
      Wednesday, August 14, 2013 12:21 AM
  • Remove From My Forums

  • Question

  • could somebody help with the error  (see pic). It is in the lab domain.

    «When you hit a wrong note it’s the next note that makes it good or bad». Miles Davis

Answers

  • Hello,

    Please refer this:

    Configuring Windows Time for Active Directory
    http://tigermatt.wordpress.com/2009/08/01/windows-time-for-active-directory/

    http://technet.microsoft.com/en-us/library/cc794937(v=ws.10).aspx

    Check system logs for any errors and update.

    For others, i have zoomed  the image. 

    Devaraj G | Technical solution architect

    • Marked as answer by

      Wednesday, August 14, 2013 12:21 AM

  • Hello,

    how in detail is your time setup configured? Port 123 UDP MUST be open for time sync.

    If that machine is the PDCEmulator, your screenshot is too small to view, assure it is configured to a NOT domain time source or the local CMOS(not recommended) from the command line with w32tm. There is no need for manual changes in the registry.

    Details about the domain time configuration please see in
    http://msmvps.com/blogs/mweber/archive/2010/06/27/time-configuration-in-a-windows-domain.aspx

    Best regards

    Meinolf Weber
    MVP, MCP, MCTS
    Microsoft MVP — Directory Services
    My Blog: http://msmvps.com/blogs/mweber/

    Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.

    • Proposed as answer by
      Ace Fekay [MCT]
      Monday, August 12, 2013 10:10 PM
    • Marked as answer by
      pob579
      Wednesday, August 14, 2013 12:21 AM
    • Marked as answer by
      pob579
      Wednesday, August 14, 2013 12:21 AM
  • Remove From My Forums

  • Question

  • could somebody help with the error  (see pic). It is in the lab domain.

    «When you hit a wrong note it’s the next note that makes it good or bad». Miles Davis

Answers

  • Hello,

    Please refer this:

    Configuring Windows Time for Active Directory
    http://tigermatt.wordpress.com/2009/08/01/windows-time-for-active-directory/

    http://technet.microsoft.com/en-us/library/cc794937(v=ws.10).aspx

    Check system logs for any errors and update.

    For others, i have zoomed  the image. 

    Devaraj G | Technical solution architect

    • Marked as answer by

      Wednesday, August 14, 2013 12:21 AM

  • Hello,

    how in detail is your time setup configured? Port 123 UDP MUST be open for time sync.

    If that machine is the PDCEmulator, your screenshot is too small to view, assure it is configured to a NOT domain time source or the local CMOS(not recommended) from the command line with w32tm. There is no need for manual changes in the registry.

    Details about the domain time configuration please see in
    http://msmvps.com/blogs/mweber/archive/2010/06/27/time-configuration-in-a-windows-domain.aspx

    Best regards

    Meinolf Weber
    MVP, MCP, MCTS
    Microsoft MVP — Directory Services
    My Blog: http://msmvps.com/blogs/mweber/

    Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.

    • Proposed as answer by
      Ace Fekay [MCT]
      Monday, August 12, 2013 10:10 PM
    • Marked as answer by
      pob579
      Wednesday, August 14, 2013 12:21 AM
    • Marked as answer by
      pob579
      Wednesday, August 14, 2013 12:21 AM
  • Remove From My Forums

  • Question

  • Hello,

    I’m trying to use the build in application ‘mail’ from Windows10, to connect it with my mailbox @skynet.be . Works OK to synchronize it with incoming mails, but for some reason, I keep getting the message ‘error 0x8007271d’ for outgoing mails, and I can’t
    send any… Account setting are verified and correct… Any suggestion? (I’m not a very technical guy, so I hope to understand eventual technical solutions ;-)).

    Eric

    • Edited by

      Sunday, January 17, 2016 3:52 PM

Answers

    • Proposed as answer by
      Ethan HuaMicrosoft contingent staff
      Tuesday, January 19, 2016 6:45 AM
    • Marked as answer by
      Ethan HuaMicrosoft contingent staff
      Monday, February 15, 2016 7:11 AM

Источник
  • Remove From My Forums

  • Question

  • Hello,

    on my network I have 3 AD’s servers (W2008). Two of them are VM, and the other is a physical server.

    So, I wanted to syncronize the PDC with and external source, and then I’m executing the following command one time a day:

    w32tm /config /manualpeerlist:»pool.ntp.org» /reliable:yes /update

    One guy on this forum told me that I’d need to execute the following line on the others two AD’s server:

    net time \PDCserver /set /y

    And I’m doing it once a day, too.

    The problem is that on one of the AD server (VM) that is not a PDC I’m getting the following error almost every minute (firewall down):

    Nombre de registro:System
    Origen:        Microsoft-Windows-Time-Service
    Fecha:         06/06/2011 15:12:19
    Id. del evento:142
    Categoría de la tarea:Ninguno
    Nivel:         Advertencia
    Palabras clave:
    Usuario:       SERVICIO LOCAL
    Equipo:        ADserver.OG.local
    Descripción:
    El servicio de hora dejó de anunciarse como origen de la hora porque el reloj local no está sincronizado.
    XML de evento:
    <Event xmlns=»http://schemas.microsoft.com/win/2004/08/events/event»>
      <System>
        <Provider Name=»Microsoft-Windows-Time-Service» Guid=»{06EDCFEB-0FD0-4E53-ACCA-A6F8BBF81BCB}» />
        <EventID>142</EventID>
        <Version>0</Version>
        <Level>3</Level>
        <Task>0</Task>
        <Opcode>0</Opcode>
        <Keywords>0x8000000000000000</Keywords>
        <TimeCreated SystemTime=»2011-06-06T13:12:19.903000000Z» />
        <EventRecordID>158559</EventRecordID>
        <Correlation />
        <Execution ProcessID=»916″ ThreadID=»2420″ />
        <Channel>System</Channel>
        <Computer>HENDRIX.OG.local</Computer>
        <Security UserID=»S-1-5-19″ />
      </System>
      <EventData Name=»TMP_EVENT_STOP_ADVERTISING»>
      </EventData>
    </Event>

    I did some test with the command w32tm. So, when I execute the command

    w32tm /monitor

    on the AD server of above, I get a problem with the ICMP protocol:

    HENDRIX.OG.local[[::1]:123]:
        ICMP: error 0x8007271D
        NTP: -0.0332734s diferencia horaria de SVHDW10.OG.local
            RefID: PDCserver.OG.local [81.92.138.29]
            Capa: 2

    But when I execute the same command into another AD server, I don’t get this error neither for this server.
    So, how could I avoid this kind of warnings?

    Thank you.

Answers

  • Ok, thank you.

    I discovered the problem was the vmware agent tool configuration.

    Anyway, after ejecute one of the commands, I got an error:

    C:Windowssystem32>w32tm /unregister
    Error: Acceso denegado. (0x80070005)

    Now the error is gone.

    • Marked as answer by

      Monday, June 13, 2011 2:02 AM

Источник

Windows 10: What is error code 0x8007271d

Discus and support What is error code 0x8007271d in Windows 10 Network and Sharing to solve the problem; I receive this error code when I attempt to start the Function Discovery Resource Publication service. The complete error message is as follows:…
Discussion in ‘Windows 10 Network and Sharing’ started by TerryLake, Feb 13, 2019.

  1. What is error code 0x8007271d

    I receive this error code when I attempt to start the Function Discovery Resource Publication service. The complete error message is as follows:

    Windows could not start the Function Discovery Resource Publication service on Local Computer.

    Error 0x8007271d: An attempt was made to access a socket in a way forbidden by its access permissions.

    I was logged in as domain admin when I received this error.

    :)

  2. error code 0x8007271d

    Hello,

    To address the error message, we suggest that you follow the troubleshooting steps provided by Syed Abdul Jabbar

    here.

    Do let us know if you need further assistance.

  3. BIOS error codes

    So I have motherboard with installed small LED screen, which presents BIOS error codes.

    Where can I find a list of those errors. And I don’t mean beep codes, but the «number» codes.

    Ex after installing sound card, the motherboard startup fails with the code 15.

    Example picture of code is here.

  4. What is error code 0x8007271d

    Windows 10 will not activate Error code 0x803F7001

    Possibly there can be the problem with Microsoft activation Server, so your Windows 10 is not activated. In this scenario, you need to wait and verify if it is the issue from Microsoft’s side. But if you are getting error code 0x803f7001, you can also try these steps:

    1. Open Settings app. Then go to Update and security > Activation screen > Change product.
    2. Type your Windows edition product key and click Next.
    3. You’ll get We couldn’t activate Windows error message.
    4. Retry steps 1-3 then type your 25-characters unique product key.
    5. Wait for the process to complete, Windows 10 is activated.

    Hope something helps this problem

Thema:

What is error code 0x8007271d

  1. What is error code 0x8007271d — Similar Threads — error code 0x8007271d

  2. What is this error code?

    in Windows 10 Gaming

    What is this error code?: My computer encountered a problem on May 23rd in the form of a Blue Screen of Death with no identifiable name. To my dismay, the error code is 0x001100f7. Here are some further details about this event: Unfortunately, I cannot upload image files..» — Dump file:…

  3. What is this error code?

    in Windows 10 Software and Apps

    What is this error code?: My computer encountered a problem on May 23rd in the form of a Blue Screen of Death with no identifiable name. To my dismay, the error code is 0x001100f7. Here are some further details about this event: Unfortunately, I cannot upload image files..» — Dump file:…

  4. What is this error code?

    in Windows 10 BSOD Crashes and Debugging

    What is this error code?: My computer encountered a problem on May 23rd in the form of a Blue Screen of Death with no identifiable name. To my dismay, the error code is 0x001100f7. Here are some further details about this event: Unfortunately, I cannot upload image files..» — Dump file:…

  5. What is error code 0x8007001f?

    in Windows 10 Software and Apps

    What is error code 0x8007001f?: I have just been chatting with Xbox support for over 2 hours now and did every single step they could think of and at the end, they directed me to windows support because they think it could possibly be a file issue or something. My problem specifically is with Xbox Gamepass…

  6. what is error code 0xc000000e

    in Windows 10 Gaming

    what is error code 0xc000000e: what is error code 0xc000000e and can it be solved?

    https://answers.microsoft.com/en-us/windows/forum/all/what-is-error-code-0xc000000e/1d54581e-615c-4a9f-ae78-37fe17587d55

  7. what is error code 0x80096004

    in Windows 10 Software and Apps

    what is error code 0x80096004: trying to update and on 1 update for office 2003 i keep getting this error code 0x80096004 any ideas how to fix it

    https://answers.microsoft.com/en-us/windows/forum/all/what-is-error-code-0x80096004/45bd33e1-74b4-4d6e-b99c-20342f416425

  8. What is error code 0x87E10BC6

    in Windows 10 Gaming

    What is error code 0x87E10BC6: HiWhy am I getting error code 0x87E10BC6 when trying to open paint in windows 11?Something happened on our end. Here’s the error code, in case you need it: 0x87E10BC6…

  9. What is an error code 0x80070422?

    in Windows 10 Software and Apps

    What is an error code 0x80070422?: Seriously, I can’t update windows 11. My windows settings show error codes like this. What am I supposed to do? I try to figure out how to fix it through services, but every time I run, it will appear acces is denied. Then what should I do? It really makes me dizzy and upset…

  10. what is error code 232403

    in Windows 10 Drivers and Hardware

    what is error code 232403: why dont you help people about this erros code

    https://answers.microsoft.com/en-us/windows/forum/all/what-is-error-code-232403/b5d2cc27-c4d7-43f7-a3e8-dc1f83bdeb57

Users found this page by searching for:

  1. error code 0x8007271d mail windows 10

    ,

  2. win10 error code 0x8007271d


Windows 10 Forums

Источник

  • W221 стояночный тормоз ошибка
  • W220 сброс ошибок пневмы
  • W220 сброс ошибок климата
  • W220 ошибка датчика скорости
  • W220 srs горит ошибка