Whirlpool микроволновка ошибка door

Whirlpool is the preferred choice among people who want to buy household equipment because they have a variety of appliances available.

It wouldn’t be wrong to say that Whirlpool has one of the most diverse selections of microwaves available in the market right now.

However, one of the problems that people have been facing with their Whirlpool microwaves is the repeated door error. That’s something you absolutely want to avoid at all costs, and it can get a bit frustrating.

In this article, we’re going to talk about the most effective ways to fix the issue if your Whirlpool microwave continues to give a door error.

Now, if your microwave continues to cause this problem, here are some of the fixes that you can try.

1. Time

Whenever the door error appears on the display screen of your Whirlpool microwave, you need to consider how long you have kept the microwave door closed.

This is because if you keep the microwave’s door closed for around five minutes or more than five minutes without starting the microwave, it can cause an error.

For this reason, you need to open and close the microwave’s door once or twice before you start heating up your food, especially if it’s been closed for longer periods.

This is actually quite thoughtful on the company’s part, as it prevents any needless switching on and ensures that the oven remains safe to use.

2. Dirt

We are all guilty of not cleaning the microwave regularly, which results in dirt or dust buildup. In particular, if there’s an excessive amount of dirt and grime near the contacts of the door, it will show the door error.

Because the door won’t close properly, the microwave will eventually stop working. Now that you know this, you have to inspect the contact area of the microwave’s door and clean up any dirt and grime that’s built around the door contacts.

Make sure that you remove the power cable of the microwave so that you can clean without having to worry about electrical consumption or accidental activation.

Secondly, if there are food spills in the microwave, they should be cleaned up immediately because when the microwave is switched on, the spills will absorb the heat and create a hotspot. These can then eventually result in a door error showing up too.

3. Packing Material

You must check for any left-behind packing material if you have just bought the Whirlpool microwave. For the most part, people often forget to take off the packing material from the inside, especially around the areas around the door contacts.

However, if the packing material keeps interfering with the microwave door’s closure, you must remove it. When the packing material is removed, the door will shut properly, and the door error will vanish.

In addition to the packing material, make sure that nothing else is blocking the door lock.

4. Microwave Placement

Some people might not agree with this point, but the microwave’s placement matters greatly when you have to fix the door error. To illustrate, you have to place the microwave on a leveled and flat surface to ensure there is no imbalance.

In addition, placing the microwave on a flat surface will ensure that there’s no issue with the angle at which the door closes. If it’s not on a level surface, there’s a risk that the hinges might not connect properly.

If there is any blockage in the components that control the door’s opening or closing, it will result in the door error.

For the most part, people install the microwave in the cooking rack, but it can hinder the closure and operation of the microwave door. So, just fix this positioning issue to ensure the door is not blocked.

5. Improper Closure

Before you go all technical with the microwave to fix the door error, we suggest that you check the door’s closure. Some people just don’t close the door properly, which causes the microwave to return an error.

That being said, you have to open the microwave door and close it firmly. When the door is firmly closed, you will hear a firm clicking noise.

6. Switch

You have to consider the door switch whenever the door error occurs with the Whirlpool microwave. The door switch simply sends a signal to the control interface once the contacts connect with each other.

In addition, there are chances that the switch is making contact, but incorrectly. There’s also the risk that your door switch is malfunctioning, which means you’ll have to replace it.

Unfortunately, that’s not something that you can do yourself, so it’s best if you take the appliance to a repair technician.

7. Door Latch

When it comes down to the door error, you need to consider every component associated with the door, and the door latch is one of them. If the door is hanging loose or just won’t close firmly, it is because the door latch has worn out or is damaged.

To fix this issue, you have to replace the door latch and make sure it’s compatible with the microwave model.

For the most part, experts suggest that users change the door latches after specific intervals (usually a couple of years) to make sure the latches keep working.

There are latch sets available for a few dollars, so purchase a full set of door latches to save the hassle.

8. Exhaust Systems

The exhaust fan in a microwave isn’t as effective as the one found on stove hoods, but it will help clear the door error. In most cases, the users don’t switch on the exhaust during cooking, which leads to the emergence of moisture from pots and pans.

This moisture development can damage the microwave and wear out the contacts much quicker, causing the door error. Make sure you keep the microwave in a well-ventilated area to avoid this problem.

9. Grease Filters

The grease filters are installed on the bottom side of the microwave and are usually overlooked. These grease filters capture any additional grease from your microwave, which results in debris development.

This will result in inefficient functionality of the grease filters and lead to a door error.

Fortunately, it is easy to clean the grease filters but don’t forget to wear gloves because washing off the grease from your hands won’t be easy. For cleaning the grease filters, you can submerge them in warm water and anti-fouling detergent.

However, you can also clean them in your dishwasher but make sure if it’s allowed by the manufacturer. On the other hand, if the grease filters don’t fit in properly, you may want to consider replacing them.

10. Handle Properly

The power switches will deactivate the microwave oven when the microwave door is opened three to four times. When the door closes, the controls need to line up with the latches to ensure the microwave oven is working optimally.

However, the latches and door switches are plastic and can chip pretty easily. So, when the latches and switches are broken, it will lead to a door error, and only a replacement can solve the issue.

In addition to getting them replaced, you need to make sure that you avoid banging the door heavily, as that could cause a repeat of the problem.

11. Don’t Use Metals

Metals in the microwave don’t go well, as they can irradiate metals, and heating metal plates and utensils in the microwave will lead to arcing.

So, when the material comes in contact with the interior side of the microwave, the arcing is likely to make a hole in the wall cavity, leading to a door error and severe damage.

For this reason, you should keep metal plates and utensils away from the microwave oven.

12. Microwave’s Temperature

The Whirlpool microwave shows a door error when it is overheated in various cases. Generally, it happens with older models because the internal components become weaker over time.

On a concluding note, you should always have a technician fix the microwave if you have to repair and replace the components. This is because microwaves are generally sensitive appliances that contain a variety of delicate components.

If you’re not careful, you might end up causing permanent damage to the appliance.

6

RU

ПАНЕЛЬ УПРАВЛЕНИЯ

Ц

ИФРОВОЙ

ДИСПЛЕЙ

На дисплее отображаются
часы с 24-часовым форматом
представления времени и
символы, указывающие текущее
время, продолжительность
приготовления, уровнеь
мощности, выбранную категрию
продуктов и состояние таймера.

К

НОПКА

«А

ВТО

—

МЕНЮ

»

Служит для задания 3
режимов автоматического
размораживания и 4
режимов автоматического
приготовления. В этих режимах
не требуется задавать мощность
и время приготовления.

К

НОПКА

«Г

РИЛЬ

»

Используется для выбора
нужной мощности гриля.

К

НОПКА

«М

ОЩНОСТЬ

«.

Используется для установки
нужного уровня мощности
микроволнового излучения.

К

НОПКА

«П

АМЯТЬ

»

Используется для вызова
нужных настроек.

К

НОПКА

«С

ТАРТ

»

Используется для начала
процесса приготовления.

К

НОПКА

«Ч

АСЫ

»

Используется для установки
текущего времени в
24-часовом формате.

К

НОПКА

+/-

Используется для увеличения/
уменьшения времени
приготовления или веса
(В режиме ожидания «-»
соответствует размораживанию
по времени, а «+» —
размораживанию по весу.)

К

НОПКА

«К

ОМБИ

»

Используется для выбора
режима «Комби-гриль» и
выбора мощности гриля.

К

НОПКА

«З

АГОТОВКИ

»

Используется для
задания нужного режима
или времени начала
приготовления.

К

НОПКА

+»

1″ Используется для
добавления 1 минуты к
времени приготовления.

К

НОПКА

«С

ТОП

»

Нажмите, чтобы остановить или
сбросить любой режим печи.

БЛОКИРОВКА ВКЛЮЧЕНИЯ / ЗАМОК ОТ ДЕТЕЙ

Б

ЛОКИРОВКА

: В режиме ождиания нажмите

кнопку «Стоп» и держите ее нажатой в течение
3 секунд — до тех пор, пока подача длинного
звукового сигнала (зуммера) не укажет на
включение функции «Замок от детей». В этом
режиме кнопки будут заблокированы, а на
дисплее будет высвечиваться текущее
время или 0:00, а также символ функции
«Замок от детей».

Р

АЗБЛОКИРОВКА

: При включенной функции

«Замок от детей» нажмите кнопку «Стоп» и
держите ее нажатой в течение 3 секунд — до тех
пор, пока подача длинного звукового сигнала
(зуммера) не укажет на выключение функции
«Замок от детей»; при этом соответствующий
символ исчезнет с дисплея, и вы снова
сможете пользоваться всеми кнопками.

Э

ТА

ПРЕДОХРАНИТЕЛЬНАЯ

АВТОМАТИЧЕСКАЯ

ФУНКЦИЯ

ВКЛЮЧАЕТСЯ

ЧЕРЕЗ

МИНУТУ

ПОСЛЕ

ТОГО

,

КАК

печь возвращается в

режим ожидания“. (Печь находится в
режиме ожидания, когда на дисплее
отображаются часы с 24-часовым форматом
представления времени или когда дисплей пуст
при неустановленной функции часов).

Д

ЛЯ

СНЯТИЯ

БЛОКИРОВКИ

ДВЕРЦУ

НУЖНО

ОТКРЫТЬ

И

ЗАКРЫТЬ

, например, для помещения продуктов

в печь. На дисплее появится надпись “

door

“

(Дверца).

DOOR

Are you faced with an unresponsive Whirlpool microwave that won’t open? Does it beep and display “door error” when you press the release button?

If so, you may have a faulty door switch or bad connection, causing the door not to respond. This frustrating trouble is increasingly common among Whirlpool microwaves, which often leaves many homeowners feeling helpless and unable to heat up their favorite foods.

This guide will explore why your Whirlpool microwave displays this error message, the potential causes, and how you can attempt to repair it on your own.

Why is there a Whirlpool Microwave Door Error?

In case you can’t pinpoint the core issue that is causing the door error to appear on your Whirlpool microwave, it is time for detailed troubleshooting.

Our list of the most common Whirlpool microwave issues will certainly help you detect the actual cause of the door error.

1. Faulty Microwave Door Switch

Your Whirlpool microwave will certainly display a door error if the door switch is faulty. The door switch is fitted on the top of the microwave, a safety feature that causes the microwave to turn off if the door is opened while it’s in operation.

If no power is supplied from the mains, then you can try to manually reset the latch by depressing this button with a small implement like a screwdriver.

2. Bad Connection to the Door

A bad connection between the door and the unit also causes a Whirlpool microwave door error. This can happen for various reasons, including:

• The door switch has worn out or has been damaged by use over time;
• There is dirt that has collected in the hinge area, which prevents the connection from being made properly;
• The door has worn out, and the connection is not as strong as it should be.

3. Door Sensor Issue

The door error message can sometimes appear on the Whirlpool microwave screen if you’ve kept the door closed for about 5 minutes (or more) without starting a microwave program.

There’s a sensor that makes sure the door is closed before starting the cooking. If the door is kept closed for too long, this sensor gets confused and gives an error message. This can be fixed by opening and closing the door several times to reset the sensor.

4. The Door wasn’t Properly Closed

The Whirlpool microwave door error can also occur when the microwave’s door is not properly closed.

This error can also happen when the user closes the door too quickly or forcefully, which causes the micro switch on the side of the door to detect that it has been shut, even if it hasn’t been fully closed yet.

Another possibility is that the door was closed carelessly, and a button was hit on the microwave’s control panel before it closed, causing it to incorrectly register that it was fully closed.

5. Faulty Door Latch

A door error code may also indicate a microwave door latch issue. The microwave door is latched by a spring-loaded hinge, which automatically opens when you open it.

If the spring breaks or gets stuck, the latch might not be secure and keep the door from closing properly.

The result may be an error code on your display or just no response from your microwave oven.

Check to see if there are any broken/deteriorated springs or if something is caught in the latch preventing it from working properly.

6. Too Much Moisture Inside the Microwave

If your microwave doesn’t have a proper exhaust system, or you’re simply not turning it on, excessive moisture inside the oven may lead to a door issue.

It is very important to control the moisture levels in the microwave to prevent overheating and damage.

Using the dishwasher or steam from a teakettle can lead to excess moisture in the microwave oven, which must be removed before turning on your microwave again.

7. The Microwave isn’t Positioned Correctly

In case your microwave isn’t positioned on a straight surface, it can cause the door not to close correctly. If your microwave is located at an incline, either up or down, it could cause problems when opening and closing the door accurately.

Alternatively, if there’s an electrical outlet near the microwave, it could be blocked. The microwave has to be positioned far enough from the wall that the door can open and close without getting stuck on anything, such as a chair or a section of the wall.

In case your microwave’s cord is too short, and you plug in an extension cord, it may not be long enough to allow the door to open and close properly.

A longer cord may be needed to reach across the top of any large appliances in your kitchen, such as an oven or dishwasher.

If you don’t use a microwave stand or have your microwave sitting on a granite countertop or another surface with no clearance for air circulation, it can also cause the door not to close correctly.

How to Fix Whirlpool Microwave Door Error

Luckily, the Whirlpool microwave door error is usually something that can be easily fixed and doesn’t point to any big issues.

Let’s jump right into the most effective methods of solving the door issue on your Whirlpool microwave.

1. Check the Door Switch

If the door switch on your microwave is malfunctioning or damaged, the error code “ER” may be displayed.

Note that this is not a common issue, and you should try other troubleshooting methods before replacing the door switch.

In order to replace the door switch, you need to open the microwave by removing its cabinet.

Please refer to your user’s manual for instructions on removing and replacing the door switch on your particular Whirlpool microwave model.

Once the switch has been replaced, and the microwave is turned on, you can confirm that it is working by pressing any button on the control panel. If no error message appears, then your microwave will work properly again.

2. Check if the Connection is Good

If something blocks the door connection,  it can cause the error code. So, first, check if something is blocking the door connection area or if any wires are disconnected.

In case there is dirt buildup in the hinge area of the door,  clean it using a mild solution of soap and water. You may also need a toothbrush to really get into all the crooks and crevices and scrub the dirt off.

If you can’t get into all the tight areas, you may need to remove the door and clean the hinges. Here are the steps to removing the microwave door:

1. Unplug the microwave from power and remove any items that are inside it.
2. Use a screwdriver to remove the screws at the door hinge, and gently lift up the door to detach it from the hinges.
3. Clean off any dirt or food particles buildup on all hinges using a soft cloth or sponge and a mild cleaning solution.
4. Reattach the door to the hinges, ensuring that all screws are tightly secured.
5. Plug your microwave back in and try rerunning it to see if the error has been resolved. If not, you may need to call a repair technician for further assistance.

If you have cleaned the area thoroughly, but are still experiencing the error code, then you may need to replace the door latch mechanism.

3. Test the Door Sensor

As we’ve explained, keeping the door closed for five or more minutes without starting a program on your microwave may confuse the door sensor. If you have this problem, simply wait for a few minutes, then try to open the door.

Another possibility could be that your microwave’s programming has been corrupted or the sensor itself is broken. In that case, you’ll have to call a repairman to either reprogram or replace it.

4. Check if the Door is Properly Closed

Not closing the door properly may result in an error code, so you must ensure that you’ve closed it tightly.

While opening the door, it should slide down without any resistance. If there is resistance on your part or if you hear a scraping sound, the door might not be closed properly.

To check for this, try to close and open the door again multiple times. This will help remove any excess lint or dirt accumulated in the hinge area or the door latch.

If this doesn’t fix the problem, you may try lubricating the hinges with a dry lubricant spray. This will help keep the door moving smoothly and prevent it from sticking.

5. Check the Door latch

If the door latch is blocked, the microwave will not activate. If you are facing this issue, then you need to follow these steps:

1. Open the microwave door and clean out any blockage in the area of the latch. This includes debris from spills, food splatter, or grime. Sometimes even a small piece of paper can keep the latch from engaging.
2. Check to see if the door is misaligned in any way. If it is, then you will need to take out a screwdriver and gently move the door back into its original position.
3. In cases where your microwave seems to be working adequately, but the error still persists, you may have a faulty latch. In this case, you will need to take out the door and replace the latch with a new one.

6. Use an Exhaust System

The best way to keep the moisture levels optimal inside the microwave and avoid any issues is to activate the exhaust system every time you use the oven.

Remember that excess moisture can lead to a series of issues with your Whirlpool microwave – not just the door error.

7. Ensure that the Microwave is Positioned Adequately

As we’ve mentioned, if the microwave isn’t positioned on a flat surface, it may result in a Whirlpool microwave door error.

You want to make sure that there’s a flat surface under the microwave. It is also important to ensure that the microwave isn’t tilted in any way and that the cord is connected properly.