Дата последнего изменения раздела:
2008-01-18
Средство устранения неполадок с базами данных Microsoft Exchange
обнаружило в журнале приложений одно или несколько событий ESE 455
с кодом ошибки -1811 (0xfffff8ed). Это событие указывает, что
текущий файл журнала транзакций (exx.log) отсутствует, недоступен
или имеет несовпадающую подпись.
Объяснение
Ниже перечислены возможные причины этой ошибки.
- Ошибка 1811, которая соответствует ошибке JET_errFileNotFound.
Эта проблема может быть связана с файлом журнала Exchange, который
имеет несовпадающую подпись и внутренний номер журнала
(LGeneration). Обычно файлом журнала Exchange является файл
E00.log. Если файл E00.log имеет несовпадающую подпись, невозможно
подключиться к банку данных, даже если база данных согласована. - Антивирусная программа отправляет на карантин или удаляет файл
журнала Exchange. - Команда восстановления eseutil /p была применена к неисправным
базам данных и файлы журнала транзакций не были удалены. - Команда восстановления eseutil /p была применена с неправильным
основным именем файла журнала, например eseutil /r Exx.log,
где Exx.log – трехсимвольное основное имя файла журнала.
Эта ошибка также может определяться как -1811,
JET_errFileNotFound. Эта ошибка применима к следующим версиям
сервера Exchange Server:
- Microsoft Exchange Server 2007
- Microsoft Exchange Server 2003
- Microsoft Exchange 2000 Server
Действия пользователя
Для устранения этой проблемы воспользуйтесь указанными
ниже способами.
- Если файл журнала имеет несовпадающую подпись и номер версии,
обратитесь в службу поддержки пользователей Майкрософт.
Дополнительные сведения см. на странице «Контакты» веб-узла
Справка и поддержка Microsoft. - Если антивирусная программа отправила на карантин или удалила
файл журнала Exchange, выполните следующие действия.- Проверьте настройки антивирусной программы.
- Убедитесь в том, что она не настроена на проверку каталогов
сервера Exchange Server. - По умолчанию некоторые антивирусные программы еженедельно
проверяют диски и каталоги в автоматическом режиме или после
запуска вручную. Этот параметр можно легко упустить из виду.
Убедитесь в том, что каталоги сервера Exchange Server добавлены в
антивирусной программе в список каталогов, которые проверять не
надо. Дополнительные сведения о настройке антивирусных программ для
совместной работы с сервером Exchange Server см. в статье 823166
базы знаний Майкрософт, Использование антивирусных программ на сервере
Exchange Server 2003. - Проверьте файлы журналов антивирусной программы, чтобы
убедиться в том, что файл журнала Exchange был отправлен на
карантин или удален.
Восстановите файл журнала Exchange, используя один из описанных
ниже способов.
Способ 1. Если файл журнала Exchange был отправлен на карантин
-
Восстановите журнал Exchange в папку, содержащую файлы
журналов рабочей среды. -
Запустите службу банка данных Microsoft
Exchange. Если все остальные файлы журналов имеются в наличии,
база данных подключается. Если другие файлы журналов отсутствуют,
посмотрите, нет ли их в папке карантина антивирусной программы.
Если их там нет, см. способ 2.
Если файл журнала Exchange был удален, необходимо
восстановить базу данных группы хранения из резервной копии. Затем
необходимо преобразовать файлы журналов. Чтобы восстановить
имеющуюся базу данных, выполните следующие действия.
Способ 2. Если файл журнала Exchange был удален
-
Переместите все несогласованные базы данных в папку
резервных копий. -
Если был создан новый файл E00.log, переместите его в
папку резервных копий. Кроме того, переместите в нее файл
E00.chk. -
Скопируйте все существующие файлы журналов в папку
резервных копий.Примечание.
Необходимо скопировать файлы журналов. а не переместить. -
Присвойте последнему файлу E00*.log имя E00.log.
-
Восстановите базу данных из резервной копии. После
этого преобразуйте файлы журналов. Это приведет базу данных в
согласованное состояние. Однако база данных не будет включать файл
E00.log, который был скопирован в папку резервных копий. Несмотря
на утрату некоторых данных, теперь базу данных можно
подключить.Примечание.
Если базу данных не удается восстановить из резервной копии,
запустите для нее программу восстановления, чтобы перевести базу
данных в согласованное состояние. -
Запустите службу банка данных Microsoft
Exchange.
Если команда восстановления eseutil /p была выполнена
для неисправных баз данных и файлы журнала не были удалены,
выполните следующие действия.
Определение того, была ли выполнена команда eseutil /p
-
Нажмите кнопку «Пуск», выберите пункт «Выполнить»,
введите «cmd» и нажмите кнопку ОК. -
Введите в командной строке следующую команду:
Копировать код
c:program filesexchsrvrbineseutil /mh "c:program filesexchsrvrmdbdata<name of Exchange database.edb>"
Синтаксис данной команды основан на следующих
предположениях:- Программные файлы Exchange Server были установлены в папку
c:program filesexchsrvr. - База данных находится в папке c:program
filesexchsrvrmdbdata.
- Программные файлы Exchange Server были установлены в папку
-
Прочитайте значение атрибута «количество исправлений».
Если оно равно нулю, команда eseutil /p не выполнялась. Если оно
отлично от нуля, команда eseutil /p была выполнена для базы
данных.
Если общие и частные базы данных находятся в
согласованном состоянии или состоянии чистого отключения, файлы
журнала транзакций можно переместить в другую папку. Чтобы
определить, находятся ли базы данных в этих состояниях, выполните
следующие действия.
Определение того, находятся ли базы данных в согласованном
состоянии или состоянии чистого отключения
-
Нажмите кнопку «Пуск», выберите пункт «Выполнить»,
введите «cmd» и нажмите кнопку ОК. -
Чтобы проверить частный банк данных, выполните
следующую команду:Копировать код
c:program filesexchsrvrbineseutil /mh "drive:program filesexchsrvrmdbdatapriv1.edb"
-
Чтобы проверить общий банк данных, выполните следующую
команду:Копировать код
c:program filesexchsrvrbineseutil /mh "drive:program filesexchsrvrmdbdatapub1.edb"
Синтаксис приведенных в примерах 2 и 3 команд основан
на следующих предположениях:- Файлы сервера Exchange Server были установлены в папку
c:program filesexchsrvr. - База данных находится в папке c:program
filesexchsrvrmdbdata.
- Файлы сервера Exchange Server были установлены в папку
-
Изучите результаты проверки согласованности. Если база
данных является согласованной (находится в состоянии чистого
отключения), это означает, что все файлы журналов были сохранены в
банке данных. Если база данных не является согласованной (находится
в состоянии неправильного отключения), это не означает, что она
повреждена. Возможно, файлы журналов еще не были сохранены в
ней. -
Если база данных находится в состоянии чистого
отключения, переместите все файлы журналов из всех каталогов
mdbdata в папку резервных копий. -
Подключите базы данных.
Если команда восстановления eseutil /r была выполнена с
неправильным основным именем файла журнала, выполните ее с
правильным параметром. К универсальным основным именам файлов
журналов относятся имена e00, e01, e02 и e03. Например, в следующей
команде указано правильное основное имя файла журнала:
eseutil /r e00
Если после выполнения описанных выше действий проблема
не исчезнет, обратитесь в службу поддержки пользователей корпорации
Майкрософт. Дополнительные сведения см. на странице «Контакты»
веб-узла Справка и поддержка Microsoft.
Одобрено: ASR Pro
Повысьте производительность вашего компьютера с помощью этой простой загрузки. г.
Если в вашей системе появляется текущая ошибка eseutil / mh 1811, большинство из нас надеется, что это сообщение в блоге может вам помочь.Неисправность 1811 Exchange также возникает, когда вы пытаетесь дефрагментировать почтовый ящик с помощью полезной нагрузки eseutil на внешней стороне Интернета. В этом случае желательно, чтобы вы вводили правильный путь к папке и блокировали удивительный путь к папке в кавычках. Приглашаются все, кто ищет решение для исправления ошибки 1811 Exchange Jet.
Ошибки Jet Engine серьезно трудно исправить, и они могут легко повредить весь файл базы данных Exchange. В большинстве случаев здесь тип ошибки легко исправить, но, опять же, когда дело доходит до Exchange Jet Error One 1811, некоторые детали требуются для ее улучшения.
Microsoft Exchange относится к наиболее широко используемым платформам обмена сообщениями, тем не менее, Exchange, как и другие приложения Microsoft, подвержен сбоям. Решить их непросто, особенно когда игра доходит до реальных ошибок, таких как сбои Exchange Jet.
Поэтому в этой статье мы действительно пытаемся понять ошибку, такую как Jet Error 1811, каковы ее возможные причины, а также как ее эффективно исправить. Но сначала, если вы сообщите нам, когда возникает эта альтернативная ошибка 1811.
Совет от профессионалов: если вы получаете доступ к ошибкам в файлах базы данных, таких как Priv.edb или Pub.edb, из-за повреждения Exchange, вы можете попробовать SysTools Exchange Recovery Tool EDB для восстановления файлов баз данных собак. Вы можете отремонтировать и восстановить свой почтовый ящик Exchange как можно скорее, а также увидеть, как восстанавливаются поврежденные файлы базы данных Exchange Server при разработке с использованием программного обеспечения, поддерживающего восстановление, и принимать меры, которые помогут вам исправить файл Exchange 2016 EDB, 2013 и позже. некоторые из следующих поддерживаемых версух.
После успешного восстановления из всех файлов базы данных Exchange и, кроме того, из почтовых ящиков, вы можете легко экспортировать восстановленные почтовые ящики Exchange в Live Exchange Server, O365 и во все другие форматы приложений.
Как Exchange Jet получил ошибку 1811?
Это одна из самых распространенных ошибок, с которыми сталкиваются пользователи. Это происходит, когда администраторы или, возможно, пользователи запускают .ose из cmd, поскольку компьютер подключен напрямую к серверу обмена. Из-за этой ошибки владельцы не могут получить доступ к своим почтовым ящикам и, следовательно, не будут иметь права на другие действия.Торговая ошибка выглядит так:
â € œ доступ к исходному источнику чисел. «Mdbdata priv2.edb» с сообщением об ошибке Jet 1811 не удалось »
Программа, в которой произошла ошибка, может сохранить в вашей системе другой путь. Эта ошибка Exchange 1811 может возникать по разным причинам при запуске инструмента Eseutil.
Определите причину ошибки 1811 Exchange Jet
Может быть несколько причин, по которым вы по-прежнему получаете ошибки здесь. Вот некоторые из детей:
- Сервер Exchange некорректно закрывался на бумаге.
- Неверно. Сильная установка из-за того, что приложение.
- Вторжение вредоносного ПО
- Отправка журнала удалена.
- Неистовство силы
- Файл документации Exchange отсутствует.
- Несоответствие номера модели частного журнала файла журнала Exchange
- Файл журнала не соответствует уникальной подписи
Исправлена ошибка Exchange Jet 1811 при различных сценариях
Давайте обсудим различные сценарии, в которых вы можете увидеть ошибку в Exchange с его сделками:
1. Возможно, все из-за ваших файлов журнала Exchange могут быть случайно стерты или утеряны, поэтому вам нужно будет обслуживать файл из файлов журнала культуры, если вы используете Exchange Information So Restore.
2. Тут же может быть другой случай, если все песни отсутствуют. В этом случае вам нужно будет проверить, сохранены ли эти файлы под этой антивирусной программой.
3. Иногда при входе в файл журнала возникает ошибка 1811 Exchange Jet. Он генерирует конкретный идентификатор события с деревом талантов 455 «Сигнальный файл в настоящее время отсутствует». Причина в основном в объекте конфигурации между сервером обмена и запущенной программой. Карантин ParameterAntivirus, вероятно, включен, но троянец не настроен и поэтому. В этом случае сделайте следующее:
- Остановите все службы Exchange Server и настройте вредоносное ПО.
- Ваши текущие файлы теперь будут сохраняться в постоянной папке.
- Удалить почти все * файлы в MDBDATA
- Проверьте файл, файлы должны быть только в e00.chk, res1.log и, как следствие, в res2.log.
- В противном случае переместите все дополнительные данные записей во временную папку.
4. Иногда владельцы получают ошибку -1811 = = 4294966274 0xfffff8ed равно Jet_errFileNotFound. Это происходит, когда файл определенно не находится в найденном месте. Причина в том, что в равной степени отсутствует файл базы данных или вы показали историю людей и базу данных Exchange в этом магазине Socialize. Вы можете исправить это, а также файл с ошибкой, проверив его целостность и убедившись, что он имеет правильные разрешения.
Одобрено: ASR Pro
ASR Pro — самый популярный и эффективный в мире инструмент для ремонта ПК. Миллионы людей доверяют ему обеспечение быстрой, бесперебойной и безошибочной работы своих систем. Благодаря простому пользовательскому интерфейсу и мощному механизму сканирования ASR Pro быстро находит и устраняет широкий спектр проблем Windows — от нестабильности системы и проблем с безопасностью до проблем с управлением памятью и производительностью.
5. Ошибка Exchange 1811 также возникает при попытке дефрагментировать эти автономные почтовые ящики с помощью команды eseutil. В некоторых случаях убедитесь, что вы ввели правильный путь к каталогу и в основном заключаете путь к каталогу только в двойные кавычки.
![]()
Также читайте: исправление ошибки Exchange Jet 1018
Заключение:
Любой, кто обычно ищет решение проблемы Exchange Jet Error 1811, может быть здесь. В блоге четко показаны различные возможные сценарии получения Exchange Jet 1811 и связанного с ним решения. Если по какой-либо уважительной причине ваши файлы базы данных Exchange Web Server станут поврежденными, в блоге есть все типы мгновенных профессиональных услуг для исправления этих файлов.
Об основателе
Ашвани Тивари
Как главный технический оператор, я осведомлен о технических деталях, с которыми пользователи сталкиваются при работе с несколькими программными продуктами. Поэтому с помощью моих информационных сайтов и статей мне нравится помогать всем конечным пользователям, которые сталкиваются с различными проблемами вместе с технологиями.
Повысьте производительность вашего компьютера с помощью этой простой загрузки. г.
г.
Since I could not find a list of the Event Ids that was accurate at all or not too general as to be useless and Microsoft won’t let us know how to fix these ourselves without having a programming degree, I am begging for help from anyone who can help
me get my computer working right again. I have some important things to get done which I can’t do without my computer working. I have tried to get what I could get but I am blocked from many files which makes it difficult to get info. Please help. I appreciate
any help I can get. Thank you,
WhiteFox42
I am not sure which one is more important.
Event id 20
Installation Failure: Windows failed to install the following update with error 0x80070643: Update for Microsoft .NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008, Windows Server 2008 R2 for x64-based Systems
(KB2468871).
Event id 11
Possible Memory Leak. Application (C:WindowsSystem32svchost.exe -k LocalServiceNetworkRestricted) (PID: 476) has passed a non-NULL pointer to RPC for an [out] parameter marked [allocate(all_nodes)]. [allocate(all_nodes)] parameters are always
reallocated; if the original pointer contained the address of valid memory, that memory will be leaked. The call originated on the interface with UUID ({3f31c91e-2545-4b7b-9311-9529e8bffef6}), Method number (20). User Action: Contact your application
vendor for an updated version of the application.
Event id 455
taskhost (1348) WebCacheLocal: Error -1811 (0xfffff8ed) occurred while opening logfile R:UserApp DataRoamingMicrosoftTemplatesLocalMicrosoftWindowsWebCacheV01.log.
Event Xml:
Event id 505
wuaueng.dll (1012) SUS20ClientDataStore: An attempt to open the compressed file «C:WindowsSoftwareDistributionDataStoreDataStore.edb» for read / write access failed because it could not be converted to a normal file. The open file operation
will fail with error -4005 (0xfffff05b). To prevent this error in the future you can manually decompress the file and change the compression state of the containing folder to uncompressed. Writing to this file when it is compressed is not supported.
Event id 513
Cryptographic Services failed while processing the OnIdentity() call in the System Writer Object
Event id 1000
Faulting application name: IEXPLORE.EXE, version: 11.0.9600.16428, time stamp: 0x525b664c
Faulting module name: IEFRAME.dll, version: 11.0.9600.16476, time stamp: 0x52944cf2
Exception code: 0xc0000005
Fault offset: 0x00025f1d
Faulting process id: 0x1854
Faulting application start time: 0x01cf0735f0e5f0c7
Faulting application path: C:Program Files (x86)Internet ExplorerIEXPLORE.EXE
Faulting module path: C:Windowssystem32IEFRAME.dll
Report Id: e3dc1e9a-733f-11e3-b920-00215a2af202
Event id 1000
Faulting application name: msiexec.exe, version: 5.0.7601.17514, time stamp: 0x4ce79d93
Faulting module name: msvcrt.dll, version: 7.0.7601.17744, time stamp: 0x4eeb033f
Exception code: 0xc0000005
Fault offset: 0x00000000000035e1
Faulting process id: 0x1030
Faulting application start time: 0x01cf01b77867a358
Faulting application path: C:Windowssystem32msiexec.exe
Faulting module path: C:Windowssystem32msvcrt.dll
Report Id: f7253b17-6daa-11e3-b944-00215a2af202
Event id 1002
Computer: w7mar-64 «I don’t know why it has computer as this when it should not be.»
Description:
The IP address lease 192.168.200.195 for the Network Card with network address 0x08002742F261 has been denied by the DHCP server 192.168.200.1 (The DHCP Server sent a DHCPNACK message).
Event id 1008
The Windows Search Service is starting up and attempting to remove the old search index {Reason: Index Corruption}.
Event id 1008
Computer: w7mar-64
Description:
An errorUser: LOCAL SERVICE
occurred in initializing the interface. The error code is: 0x2.
Event id 1014
User: NETWORK SERVICE
Computer:
Description:
Name resolution for the name wpad.westell.com timed out after none of the configured DNS servers responded.
Event id 1015
User: N/A
Computer: w7mar-64
Description:
Event ID 1013 for the Windows Search Service has been suppressed 7 time(s) since 12:04:10 PM. This event is used to suppress Windows Search Service events that have occurred frequently within a short period of time. See Event ID 1013 for further details
on this event.
Event id 1015
Failed to connect to server. Error: 0x8007043C
Event id 1018
The description for Event ID 1018 from source EvntAgnt cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
Event id 1020
Updates to the IIS metabase were aborted because IIS is either not installed or is disabled on this machine. To configure ASP.NET to run in IIS, please install or enable IIS and re-register ASP.NET using aspnet_regiis.exe /i.
Event id 1028
Windows Installer has determined that its configuration data cache folder was not secured properly. The owner of the key must be either Local System or BuiltinAdministrators. The existing folder will be deleted and re-created with the appropriate security
settings.
Event id 1101
.NET Runtime Optimization Service (clr_optimization_v4.0.30319_32) — Failed to compile: System.Web.Entity.Design, Version=3.5.0.0, Culture=Neutral, PublicKeyToken=b77a5c561934e089, processorArchitecture=msil . Error code = 0x80010108
Event id 1500
The description for Event ID 1500 from source SNMP cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
Event id 1530
Windows detected your registry file is still in use by other applications or services. The file will be unloaded now. The applications or services that hold your registry file may not function properly afterwards.
Event id 1530
Windows detected your registry file is still in use by other applications or services. The file will be unloaded now. The applications or services that hold your registry file may not function properly afterwards.
DETAIL —
6 user registry handles leaked from RegistryUserS-1-5-21-2959539970-205720217-4182857889-1000:
Process 1020 (DeviceHarddiskVolume2WindowsSystem32svchost.exe) has opened key REGISTRYUSERS-1-5-21-2959539970-205720217-4182857889-1000Software
Process 1020 (DeviceHarddiskVolume2WindowsSystem32svchost.exe) has opened key REGISTRYUSERS-1-5-21-2959539970-205720217-4182857889-1000SoftwareMicrosoftWindowsCurrentVersionInternet Settings
Process 1020 (DeviceHarddiskVolume2WindowsSystem32svchost.exe) has opened key REGISTRYUSERS-1-5-21-2959539970-205720217-4182857889-1000SoftwareMicrosoftWindowsCurrentVersionInternet Settings
Process 1020 (DeviceHarddiskVolume2WindowsSystem32svchost.exe) has opened key REGISTRYUSERS-1-5-21-2959539970-205720217-4182857889-1000SoftwarePoliciesMicrosoftWindowsCurrentVersionInternet Settings
Process 1020 (DeviceHarddiskVolume2WindowsSystem32svchost.exe) has opened key REGISTRYUSERS-1-5-21-2959539970-205720217-4182857889-1000SoftwareMicrosoftInternet ExplorerMain
Process 1020 (DeviceHarddiskVolume2WindowsSystem32svchost.exe) has opened key REGISTRYUSERS-1-5-21-2959539970-205720217-4182857889-1000SoftwarePolicies
Event id 3028
Context: Windows Application, SystemIndex Catalog
Details:
The content index catalog is corrupt. (HRESULT : 0xc0041801) (0xc0041801)
Event id 3029
Context: Windows Application, SystemIndex Catalog
Details:
The content index catalog is corrupt. (HRESULT : 0xc0041801) (0xc0041801)
Event id 3036
The content source <csc://{S-1-5-21-2959539970-205720217-4182857889-1001}/> cannot be accessed.
Event id 3036
No protocol handler is available. Install a protocol handler that can process this URL type. (HRESULT : 0x80040d37) (0x80040d37)
Event id 4104
Description:
The backup was not successful. The error is: Access is denied. (0x80070005).
Event id 4228
TCP/IP has chosen to restrict the scale factor due to a network condition. This could be related to a problem in a network device and will cause degraded throughput.
Event id 4321
The name «WHITEFOXPC :0» could not be registered on the interface with IP address 192.168.1.21. The computer with the IP address 192.168.1.19 did not allow the name to be claimed by this computer.
Event id 4373
The description for Event ID 4373 from source NtServicePack cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
Event id 4879
MSDTC encountered an error (HR=0x80000171) while attempting to establish a secure connection with system WHITEFOXPC.
Event id 6000
The winlogon notification subscriber <GPClient> was unavailable to handle a notification event.
Event id 6006
The winlogon notification subscriber <TrustedInstaller> took 186 second(s) to handle the notification event (CreateSession).
Event id 7000
The Windows Audio service failed to start due to the following error:
A privilege that the service requires to function properly does not exist in the service account configuration. You may use the Services Microsoft Management Console (MMC) snap-in (services.msc) and the Local Security Settings MMC snap-in (secpol.msc) to view
the service configuration and the account configuration.
Event id 7001
The Computer Browser service depends on the Server service which failed to start because of the following error:
The dependency service or group failed to start.
Event id 7010
The index cannot be initialized.
Details:
The content index catalog is corrupt. (HRESULT : 0xc0041801) (0xc0041801)
Event id 7023
The Block Level Backup Engine Service service terminated with the following error:
%%-2147024713
Event id 7024
The Windows Search service terminated with service-specific error %%-1073473535.
Event id 7026
The following boot-start or system-start driver(s) failed to load:
aswKbd
aswRvrt
aswSnx
aswSP
aswTdi
aswVmm
discache
spldr
Wanarpv6
Event id 7030 & 7031
The dldw_device service is marked as an interactive service. However, the system is configured to not allow interactive services. This service may not function properly.
Event id 7032
The Service Control Manager tried to take a corrective action (Restart the service) after the unexpected termination of the Windows Installer service, but this action failed with the following error:
An instance of the service is already running.
Event id 7040
The search service has detected corrupted data files in the index {id=4700}. The service will attempt to automatically correct this problem by rebuilding the index.
Event id 7042
The Windows Search Service is being stopped because there is a problem with the indexer: The catalog is corrupt.
Details:
The content index catalog is corrupt. (HRESULT : 0xc0041801) (0xc0041801)
Event id 8210
An unspecified error occurred during System Restore: (Installed Java 7 Update 45). Additional information: 0x80070003.
Event id 9000
The Windows Search Service cannot open the Jet property store.
Details:
0x%08x (0xc0041800 — The content index database is corrupt. (HRESULT : 0xc0041800))
Event id 10005
DCOM got error «1084» attempting to start the service MSIServer with arguments «» in order to run the server:
{000C101C-0000-0000-C000-000000000046}
Event id 10010
15 of these with different server codes which I can’t copy unless I copy all the details.
The server {3EEF301F-B596-4C0B-BD92-013BEAFCE793} did not register with DCOM within the required timeout.
Event id 12348
Volume Shadow Copy Service warning: VSS was denied access to the root of volume ?Volume{8e79517c-6c41-11e3-b621-cb03f0618d54}. Denying administrators from accessing volume roots can cause many unexpected failures, and will prevent VSS from functioning
properly. Check security on the volume, and try the operation again.
Event id 15006
9 of these.
Description:
Owner of the log file or directory SystemRootSystem32LogFilesHTTPERRhttperr1.log is invalid. This could be because another user has already created the log file or the directory.
Event id 31004
33 of tese.
The DNS proxy agent was unable to allocate 0 bytes of memory. This may indicate that the system is low on virtual memory, or that the memory manager has encountered an internal error.
The End.
Kimberly D. White-Fox
Since I could not find a list of the Event Ids that was accurate at all or not too general as to be useless and Microsoft won’t let us know how to fix these ourselves without having a programming degree, I am begging for help from anyone who can help
me get my computer working right again. I have some important things to get done which I can’t do without my computer working. I have tried to get what I could get but I am blocked from many files which makes it difficult to get info. Please help. I appreciate
any help I can get. Thank you,
WhiteFox42
I am not sure which one is more important.
Event id 20
Installation Failure: Windows failed to install the following update with error 0x80070643: Update for Microsoft .NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008, Windows Server 2008 R2 for x64-based Systems
(KB2468871).
Event id 11
Possible Memory Leak. Application (C:WindowsSystem32svchost.exe -k LocalServiceNetworkRestricted) (PID: 476) has passed a non-NULL pointer to RPC for an [out] parameter marked [allocate(all_nodes)]. [allocate(all_nodes)] parameters are always
reallocated; if the original pointer contained the address of valid memory, that memory will be leaked. The call originated on the interface with UUID ({3f31c91e-2545-4b7b-9311-9529e8bffef6}), Method number (20). User Action: Contact your application
vendor for an updated version of the application.
Event id 455
taskhost (1348) WebCacheLocal: Error -1811 (0xfffff8ed) occurred while opening logfile R:UserApp DataRoamingMicrosoftTemplatesLocalMicrosoftWindowsWebCacheV01.log.
Event Xml:
Event id 505
wuaueng.dll (1012) SUS20ClientDataStore: An attempt to open the compressed file «C:WindowsSoftwareDistributionDataStoreDataStore.edb» for read / write access failed because it could not be converted to a normal file. The open file operation
will fail with error -4005 (0xfffff05b). To prevent this error in the future you can manually decompress the file and change the compression state of the containing folder to uncompressed. Writing to this file when it is compressed is not supported.
Event id 513
Cryptographic Services failed while processing the OnIdentity() call in the System Writer Object
Event id 1000
Faulting application name: IEXPLORE.EXE, version: 11.0.9600.16428, time stamp: 0x525b664c
Faulting module name: IEFRAME.dll, version: 11.0.9600.16476, time stamp: 0x52944cf2
Exception code: 0xc0000005
Fault offset: 0x00025f1d
Faulting process id: 0x1854
Faulting application start time: 0x01cf0735f0e5f0c7
Faulting application path: C:Program Files (x86)Internet ExplorerIEXPLORE.EXE
Faulting module path: C:Windowssystem32IEFRAME.dll
Report Id: e3dc1e9a-733f-11e3-b920-00215a2af202
Event id 1000
Faulting application name: msiexec.exe, version: 5.0.7601.17514, time stamp: 0x4ce79d93
Faulting module name: msvcrt.dll, version: 7.0.7601.17744, time stamp: 0x4eeb033f
Exception code: 0xc0000005
Fault offset: 0x00000000000035e1
Faulting process id: 0x1030
Faulting application start time: 0x01cf01b77867a358
Faulting application path: C:Windowssystem32msiexec.exe
Faulting module path: C:Windowssystem32msvcrt.dll
Report Id: f7253b17-6daa-11e3-b944-00215a2af202
Event id 1002
Computer: w7mar-64 «I don’t know why it has computer as this when it should not be.»
Description:
The IP address lease 192.168.200.195 for the Network Card with network address 0x08002742F261 has been denied by the DHCP server 192.168.200.1 (The DHCP Server sent a DHCPNACK message).
Event id 1008
The Windows Search Service is starting up and attempting to remove the old search index {Reason: Index Corruption}.
Event id 1008
Computer: w7mar-64
Description:
An errorUser: LOCAL SERVICE
occurred in initializing the interface. The error code is: 0x2.
Event id 1014
User: NETWORK SERVICE
Computer:
Description:
Name resolution for the name wpad.westell.com timed out after none of the configured DNS servers responded.
Event id 1015
User: N/A
Computer: w7mar-64
Description:
Event ID 1013 for the Windows Search Service has been suppressed 7 time(s) since 12:04:10 PM. This event is used to suppress Windows Search Service events that have occurred frequently within a short period of time. See Event ID 1013 for further details
on this event.
Event id 1015
Failed to connect to server. Error: 0x8007043C
Event id 1018
The description for Event ID 1018 from source EvntAgnt cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
Event id 1020
Updates to the IIS metabase were aborted because IIS is either not installed or is disabled on this machine. To configure ASP.NET to run in IIS, please install or enable IIS and re-register ASP.NET using aspnet_regiis.exe /i.
Event id 1028
Windows Installer has determined that its configuration data cache folder was not secured properly. The owner of the key must be either Local System or BuiltinAdministrators. The existing folder will be deleted and re-created with the appropriate security
settings.
Event id 1101
.NET Runtime Optimization Service (clr_optimization_v4.0.30319_32) — Failed to compile: System.Web.Entity.Design, Version=3.5.0.0, Culture=Neutral, PublicKeyToken=b77a5c561934e089, processorArchitecture=msil . Error code = 0x80010108
Event id 1500
The description for Event ID 1500 from source SNMP cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
Event id 1530
Windows detected your registry file is still in use by other applications or services. The file will be unloaded now. The applications or services that hold your registry file may not function properly afterwards.
Event id 1530
Windows detected your registry file is still in use by other applications or services. The file will be unloaded now. The applications or services that hold your registry file may not function properly afterwards.
DETAIL —
6 user registry handles leaked from RegistryUserS-1-5-21-2959539970-205720217-4182857889-1000:
Process 1020 (DeviceHarddiskVolume2WindowsSystem32svchost.exe) has opened key REGISTRYUSERS-1-5-21-2959539970-205720217-4182857889-1000Software
Process 1020 (DeviceHarddiskVolume2WindowsSystem32svchost.exe) has opened key REGISTRYUSERS-1-5-21-2959539970-205720217-4182857889-1000SoftwareMicrosoftWindowsCurrentVersionInternet Settings
Process 1020 (DeviceHarddiskVolume2WindowsSystem32svchost.exe) has opened key REGISTRYUSERS-1-5-21-2959539970-205720217-4182857889-1000SoftwareMicrosoftWindowsCurrentVersionInternet Settings
Process 1020 (DeviceHarddiskVolume2WindowsSystem32svchost.exe) has opened key REGISTRYUSERS-1-5-21-2959539970-205720217-4182857889-1000SoftwarePoliciesMicrosoftWindowsCurrentVersionInternet Settings
Process 1020 (DeviceHarddiskVolume2WindowsSystem32svchost.exe) has opened key REGISTRYUSERS-1-5-21-2959539970-205720217-4182857889-1000SoftwareMicrosoftInternet ExplorerMain
Process 1020 (DeviceHarddiskVolume2WindowsSystem32svchost.exe) has opened key REGISTRYUSERS-1-5-21-2959539970-205720217-4182857889-1000SoftwarePolicies
Event id 3028
Context: Windows Application, SystemIndex Catalog
Details:
The content index catalog is corrupt. (HRESULT : 0xc0041801) (0xc0041801)
Event id 3029
Context: Windows Application, SystemIndex Catalog
Details:
The content index catalog is corrupt. (HRESULT : 0xc0041801) (0xc0041801)
Event id 3036
The content source <csc://{S-1-5-21-2959539970-205720217-4182857889-1001}/> cannot be accessed.
Event id 3036
No protocol handler is available. Install a protocol handler that can process this URL type. (HRESULT : 0x80040d37) (0x80040d37)
Event id 4104
Description:
The backup was not successful. The error is: Access is denied. (0x80070005).
Event id 4228
TCP/IP has chosen to restrict the scale factor due to a network condition. This could be related to a problem in a network device and will cause degraded throughput.
Event id 4321
The name «WHITEFOXPC :0» could not be registered on the interface with IP address 192.168.1.21. The computer with the IP address 192.168.1.19 did not allow the name to be claimed by this computer.
Event id 4373
The description for Event ID 4373 from source NtServicePack cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
Event id 4879
MSDTC encountered an error (HR=0x80000171) while attempting to establish a secure connection with system WHITEFOXPC.
Event id 6000
The winlogon notification subscriber <GPClient> was unavailable to handle a notification event.
Event id 6006
The winlogon notification subscriber <TrustedInstaller> took 186 second(s) to handle the notification event (CreateSession).
Event id 7000
The Windows Audio service failed to start due to the following error:
A privilege that the service requires to function properly does not exist in the service account configuration. You may use the Services Microsoft Management Console (MMC) snap-in (services.msc) and the Local Security Settings MMC snap-in (secpol.msc) to view
the service configuration and the account configuration.
Event id 7001
The Computer Browser service depends on the Server service which failed to start because of the following error:
The dependency service or group failed to start.
Event id 7010
The index cannot be initialized.
Details:
The content index catalog is corrupt. (HRESULT : 0xc0041801) (0xc0041801)
Event id 7023
The Block Level Backup Engine Service service terminated with the following error:
%%-2147024713
Event id 7024
The Windows Search service terminated with service-specific error %%-1073473535.
Event id 7026
The following boot-start or system-start driver(s) failed to load:
aswKbd
aswRvrt
aswSnx
aswSP
aswTdi
aswVmm
discache
spldr
Wanarpv6
Event id 7030 & 7031
The dldw_device service is marked as an interactive service. However, the system is configured to not allow interactive services. This service may not function properly.
Event id 7032
The Service Control Manager tried to take a corrective action (Restart the service) after the unexpected termination of the Windows Installer service, but this action failed with the following error:
An instance of the service is already running.
Event id 7040
The search service has detected corrupted data files in the index {id=4700}. The service will attempt to automatically correct this problem by rebuilding the index.
Event id 7042
The Windows Search Service is being stopped because there is a problem with the indexer: The catalog is corrupt.
Details:
The content index catalog is corrupt. (HRESULT : 0xc0041801) (0xc0041801)
Event id 8210
An unspecified error occurred during System Restore: (Installed Java 7 Update 45). Additional information: 0x80070003.
Event id 9000
The Windows Search Service cannot open the Jet property store.
Details:
0x%08x (0xc0041800 — The content index database is corrupt. (HRESULT : 0xc0041800))
Event id 10005
DCOM got error «1084» attempting to start the service MSIServer with arguments «» in order to run the server:
{000C101C-0000-0000-C000-000000000046}
Event id 10010
15 of these with different server codes which I can’t copy unless I copy all the details.
The server {3EEF301F-B596-4C0B-BD92-013BEAFCE793} did not register with DCOM within the required timeout.
Event id 12348
Volume Shadow Copy Service warning: VSS was denied access to the root of volume ?Volume{8e79517c-6c41-11e3-b621-cb03f0618d54}. Denying administrators from accessing volume roots can cause many unexpected failures, and will prevent VSS from functioning
properly. Check security on the volume, and try the operation again.
Event id 15006
9 of these.
Description:
Owner of the log file or directory SystemRootSystem32LogFilesHTTPERRhttperr1.log is invalid. This could be because another user has already created the log file or the directory.
Event id 31004
33 of tese.
The DNS proxy agent was unable to allocate 0 bytes of memory. This may indicate that the system is low on virtual memory, or that the memory manager has encountered an internal error.
The End.
Kimberly D. White-Fox
-
#1
доброго вечера! когда я подключаюсь к терминальному серверу по rdp почему то появляется черный экран и все. подскажите как починить это?
-
#2
доброго вечера! когда я подключаюсь к терминальному серверу по rdp почему то появляется черный экран и все. подскажите как починить это?
мало места на диске? перезагрузка? Попробуйте
Попробуйте подключиться напрямую, если это виртуалка — то через консоль. Посмотрите системный журнал
-
#3
мало места на диске? перезагрузка? Попробуйте
Попробуйте подключиться напрямую, если это виртуалка — то через консоль. Посмотрите системный журнал
перезагрузка помогла. Полезла изучать лог
Вроде бы там ничего особенного поначалу но потом нашлась целая куча ошибок
Ошибка установки: не удается установить следующее обновление из-за ошибки 0x80246013: Обновление служебного стека для Windows Server 2016 для систем на базе процессоров x64, 201907 (KB4509091).
Система перезагрузилась, завершив работу с ошибками. Возможные причины ошибки: система перестала отвечать на запросы, произошел критический сбой или неожиданно отключилось питание.
Сбой при запуске службы «Служба настройки сети» из-за ошибки
Служба не ответила на запрос своевременно.
Превышение времени ожидания (30000 мс) при ожидании ответа транзакции от службы «DiagTrack».
Сбой при запуске службы «Помощник по входу в учетную запись Майкрософт» из-за ошибки
Служба не ответила на запрос своевременно.
Ошибка при обработке групповой политики. Windows пыталась получить новые параметры групповой политики для этого пользователя или компьютера. На вкладке «Подробности» можно найти код и описание ошибки. Windows автоматически повторит попытку выполнения этой операции при следующем цикле обновления. Присоединенные к домену компьютеры должны успешно проходить процесс разрешения имени и иметь подключение к контроллеру домена для обнаружения новых объектов групповой политики и их параметров. Когда обработка групповой политики будет выполнена успешно, это событие будет записано в журнал.
Регистрация сервера {73E709EA-5D93-4B2E-BBB0-99B7938DA9E4} DCOM не выполнена за отведенное время ожидания.
Ошибка в процедуре открытия службы «BITS» из библиотеки «C:WindowsSystem32bitsperf.dll». Данные производительности не будут доступны для этой службы. Первые четыре байта (DWORD) в разделе данных содержат код ошибки.
-
#4
Это еще не все :ahtung1: еще журнал приложений
Ошибка обработки события уведомления подписчика уведомлений winlogon <Sens>.
svchost (1008) SoftwareUsageMetrics-Svc: Ошибка -1811 (0xfffff8ed) при открытии файла журнала C:Windowssystem32LogFilesSumSvc03857.log.
Это еще че за хрень?? Кортана нам зачем:wtf:
Сбой активации приложения Microsoft.Windows.Cortana_cw5n1h2txyewy!CortanaUI. Ошибка: Приложение не запустилось в требуемое время.. Дополнительные сведения см. в журнале Microsoft-Windows-TWinUI/Operational.
Подписчик уведомлений winlogon <Sens> тратит слишком много времени на обработку события уведомления (Disconnect).
Ну и вишенка на торте Application Error
Имя сбойного приложения: 1cv8.exe, версия: 8.2.19.80, метка времени: 0x52991f5f
Имя сбойного модуля: 1cv8.exe, версия: 8.2.19.80, метка времени: 0x52991f5f
Код исключения: 0xc0000005
Смещение ошибки: 0x0001e990
Идентификатор сбойного процесса: 0x3804
Время запуска сбойного приложения: 0x01d55cc82ae47a6d
Путь сбойного приложения: C:Program Files (x86)1cv828.2.19.80bin1cv8.exe
Путь сбойного модуля: C:Program Files (x86)1cv828.2.19.80bin1cv8.exe
Идентификатор отчета: bc31cba1-da40-4254-8c1e-9c8a8a435675
Полное имя сбойного пакета:
Код приложения, связанного со сбойным пакетом:
-
#5
жуть и правда. Если вам помогла перезагрузка очистите журналы что бы старые евенты отсечь, посмотрите будут ли ошибки повторяться…
-
#6
похоже 1с 8.2 сбойнула и положила все по цепной реакции sql server и систему
Package «MaintenancePlan» failed.
SQL Server Scheduled Job ‘MaintenancePlan.ВложенныйПлан_1’ (0x65C611746A522542A1753437C699C85E) — Status: Сбой — Invoked on: 2019-08-25 00:00:00 — Message: Не удалось завершить задание. Запуск задания был произведен Расписание 9 (MaintenancePlan.ВложенныйПлан_1). Последним выполнявшимся шагом был шаг 1 (ВложенныйПлан_1).
и даже групповые политики не применяются похоже
Элемент предпочтения пользователь «F:» в объекте групповой политики «DISK_D {4E112A2A-8931-4A7D-ABF2-7306317777FF}» не применен по причине ошибки с кодом ‘0x80070043 Не найдено сетевое имя.’ Эта ошибка была отключена.
-
#7
в общем длительное изучение журнала говорит что все началось с краха 1с 8.2 а потом все разъехалось дальше. Обновлюка я 1с пойду…:gowork:
-
#8
и обновления на windows поставьте
Resolve Exchange Jet Error 1811 With Different Scenarios
Jet Engine errors are quite hard to resolve and can easily harm your Exchange database file. Majority of time these errors get easily resolved, but when it comes to Exchange Jet error 1811 one must require profound information to fix it.
Microsoft Exchange is one of the most popular utilized emailing platform, however like other applications, Microsoft Exchange is also vulnerable to number of errors. Resolving them is a tedious task especially when it comes with real blunder issues like Exchange Jet errors .
Hence, in this article, we are going to understand one such blunder is Jet error 1811, what are the possible reasons behind it and how can it be settled in an effective way. But first let us understand when this Exchange Error 1811 comes.
Pro Tip: If in case, you are getting an error due to corruption issue found in Exchange database files like Priv.edb or Pub.edb, then you can try SysTools Exchange EDB Recovery Tool for repairing its database files. You can quickly recover & repair Exchange mailbox and fix your corrupted Exchange Server database files by using this software which supports to recover and repair EDB file Exchange 2016, 2013 & all its below versions.
After the successful recovery of the Exchange database file and mailboxes, you can export the recovered Exchange mailboxes into Live Exchange Server, O365 and different file formats in a simplified way.
How Exchange Jet Error 1811 Encounter?
The error is one of the most common error faced by the users. It comes when the administrators or the users execute eseutil.ese from cmd where machine is connected to the Exchange Server. Due to this error, users become inaccessible to their mailboxes, hence, not be able to perform other activities.
Error generated by Exchange is as follows:
“Access to the source database. ‘…mdbdatapriv2.edb’ failed with jet error 1811”
It could be the possibility that the error code contain different path in your system. There could be various reasons why this Exchange error 1811 occur, running Eseutil tool, user is in no mount state while trying to fix database corruption are some of the reasons why this error occurs.
Know the Cause Exchange Jet Error 1811
There could be number of reasons of getting this error. Some of them are as below:
- Unclean Shutdown of Exchange Server
- Inappropriate installation of an application
- Malware Intrusion
- Deleted Log file
- Power Outrage
- Missing Exchange Log file
- Mismatch between Exchange Log file signature Log generation number
- Mismatch Log file with its original signature
Fix Exchange Jet Error 1811 with Different Scenarios
Let us discuss various scenarios of getting this error in Exchange with its solution :
1. It could be the possibility that your Exchange log files get accidentally deleted or get misplaced, for that you need to use “Exchange Information Restore” so that you can recover the file from the production log files.
2. Another case could be if there is no missing file. For that case you need to check whether the files are stored under the Anti-Virus Program.
3. Sometimes Exchange Jet Error 1811 occurs while opening the log file. It generates an Event ID of 455 stating ‘currently log file is missing’. Reason being an issue in configuration between the Exchange Server and the currently running program. Or an Anti-Virus Quarantine option is enabled but the antivirus is not configuring accordingly.For that case, Perform the following steps:
- Stop all services of Exchange Server & Configure your Anti-virus program
- Now save your current log files to a temporary folder
- Delete all *log files located in MDBDATA
- Check the folder, only e00.chk, res1.log & res2.log files must be present there.
- If not, transfer all the extra files present there to a temporary folder.
4. Sometimes user get Error -1811 = 4294966274 = 0xfffff8ed = Jet_errFileNotFound. This occur when file is not found at the location. Reason being the missing database file or you have located your log files and Exchange database on network storage. You can resolve it by checking the file in which you are facing error, check its integrity and ensure it must have proper access permissions.
5. The Exchange error 1811 also occurs when you try to do an offline defrag of the mailbox using command eseutil. In this case, make sure you have entered correct folder path and enclose your folder path in double quotation marks.
Also Read: Fix Exchange Jet Error 1018
Conclusion:
For all those users who are looking for a solution to fix Exchange Jet Error 1811 are welcomed here. The blog discusses various possible scenarios of getting Exchange Error 1811 and the solution associated with it. If, somehow your exchange server database files got corrupted due to any of the reason, the blog covers an instant solution for repairing those files.
Добрый день!
В организации установлен MS Exchange 2007 SP1 ( MS Windows Server 2008 sp1)
Последние несколько недель отключаются ВСЕ почтовые базы, в логах на момент отключения фигурируют ошибки
Имя журнала: Application
Подача: ESE
Дата: 02.04.2014 16:54:56
Код события: 486
Категория задачи:Общие
Уровень: Ошибка
Ключевые слова:Классический
Пользователь: Н/Д
Компьютер: calypso.corp.local
Описание:
MSExchangeIS (4340) First Storage Group: При попытке перемещения файла «C:Program FilesMicrosoftExchange ServerMailboxFirst Storage GroupE00003DA94A.log» на «C:Program FilesMicrosoftExchange ServerMailboxFirst Storage GroupE00tmp.log»
произошла системная ошибка 2 (0x00000002): «Не удается найти указанный файл. «. Операция перемещения файла приведет к ошибке -1811 (0xfffff8ed).
Имя журнала: Application
Подача: ESE
Дата: 02.04.2014 16:54:56
Код события: 413
Категория задачи:Ведение журнала и восстановление
Уровень: Ошибка
Ключевые слова:Классический
Пользователь: Н/Д
Компьютер: calypso.corp.local
Описание:
MSExchangeIS (4340) First Storage Group: Не удается создать файл журнала, поскольку базе данных не удается выполнить запись на диск файла журнала. Возможно, диск предназначен только для чтения, на диске недостаточно свободного места, диск неправильно
настроен или поврежден. Ошибка -1811.
Имя журнала: Application
Подача: ESE
Дата: 02.04.2014 16:54:56
Код события: 492
Категория задачи:Ведение журнала и восстановление
Уровень: Ошибка
Ключевые слова:Классический
Пользователь: Н/Д
Компьютер: calypso.corp.local
Описание:
MSExchangeIS (4340) First Storage Group: Последовательность файлов журнала в «C:Program FilesMicrosoftExchange ServerMailboxFirst Storage Group» была прервана из-за неустранимой ошибки. Последующие обновления для баз данных, использующих
эту последовательность файлов журнала, будут невозможны. Устраните эту проблему и выполните перезагрузку или восстановите базу данных из резервной копии.
Имя журнала: Application
Подача: ESE
Дата: 02.04.2014 16:54:56
Код события: 471
Категория задачи:Ведение журнала и восстановление
Уровень: Ошибка
Ключевые слова:Классический
Пользователь: Н/Д
Компьютер: calypso.corp.local
Описание:
MSExchangeIS (4340) First Storage Group: Не удается откатить операцию № 12828657 базы данных E:Exchange_DatabaseMailbox Database.edb. Ошибка: -510. Все последующие обновления базы данных будут отклонены.
На диске С: и на диске E: место есть и оба массива находятся в рабочем состоянии
We recently had Transport service crashing on one of our Hub servers. The following events were logged in Event Log.
Event Type: Error
Event Source: ESE
Event Category: Logging/Recovery
Event ID: 455
Description:
edgetransport (2856) Transport Mail Database: Error -1811 (0xfffff8ed) occurred while opening logfile e:ExchangeQueuetrn.log.
Event Type: Error
Event Source: MSExchangeTransport
Event Category: Storage
Event ID: 17005
Description:
Transport Mail Database: The database could not be opened because a log file is missing or corrupted. The Microsoft Exchange Transport service is shutting down. Manual database recovery or repair may be required. The exception is Microsoft.Exchange.Isam. IsamMissingLogFileException: Current log file missing (-528)
We checked to confirm that the file E:ExchangeQueuetrn.log was missing and there were only two log files (trn00605D42.log and trn00605D43.log) in the path. As per Microsoft TechNet, we moved the log files to another folder and tried starting Transport service – only this time to receive a new error. (However, a new e:ExchangeQueuetrn.log file was created while the service was trying to start).
Event Type: Error
Event Source: MSExchangeTransport
Event Category: Storage
Event ID: 17005
Description:
Transport Mail Database: The database could not be opened because a log file is missing or corrupted. The Microsoft Exchange Transport service is shutting down. Manual database recovery or repair may be required. The exception is Microsoft.Exchange.Isam.IsamDatabaseDirtyShutdownException: Database was not shutdown cleanly. Recovery must first be run to properly complete database operations for the previous shutdown. (-550)
Running ESEUTIL /mh e:ExchangeQueuemail.que confirmed that the database was in a ‘Dirty Shutdown’ state. ESEUTIL /P on a copy of mail.que seemed to have worked. So ran it on the original to resolve the issue.
– Thanks, Jinesh.
Дата последнего изменения раздела:
2008-01-18
Средство устранения неполадок с базами данных Microsoft Exchange
обнаружило в журнале приложений одно или несколько событий ESE 455
с кодом ошибки -1811 (0xfffff8ed). Это событие указывает, что
текущий файл журнала транзакций (exx.log) отсутствует, недоступен
или имеет несовпадающую подпись.
Объяснение
Ниже перечислены возможные причины этой ошибки.
- Ошибка 1811, которая соответствует ошибке JET_errFileNotFound.
Эта проблема может быть связана с файлом журнала Exchange, который
имеет несовпадающую подпись и внутренний номер журнала
(LGeneration). Обычно файлом журнала Exchange является файл
E00.log. Если файл E00.log имеет несовпадающую подпись, невозможно
подключиться к банку данных, даже если база данных согласована. - Антивирусная программа отправляет на карантин или удаляет файл
журнала Exchange. - Команда восстановления eseutil /p была применена к неисправным
базам данных и файлы журнала транзакций не были удалены. - Команда восстановления eseutil /p была применена с неправильным
основным именем файла журнала, например eseutil /r Exx.log,
где Exx.log – трехсимвольное основное имя файла журнала.
Эта ошибка также может определяться как -1811,
JET_errFileNotFound. Эта ошибка применима к следующим версиям
сервера Exchange Server:
- Microsoft Exchange Server 2007
- Microsoft Exchange Server 2003
- Microsoft Exchange 2000 Server
Действия пользователя
Для устранения этой проблемы воспользуйтесь указанными
ниже способами.
- Если файл журнала имеет несовпадающую подпись и номер версии,
обратитесь в службу поддержки пользователей Майкрософт.
Дополнительные сведения см. на странице «Контакты» веб-узла
Справка и поддержка Microsoft. - Если антивирусная программа отправила на карантин или удалила
файл журнала Exchange, выполните следующие действия.- Проверьте настройки антивирусной программы.
- Убедитесь в том, что она не настроена на проверку каталогов
сервера Exchange Server. - По умолчанию некоторые антивирусные программы еженедельно
проверяют диски и каталоги в автоматическом режиме или после
запуска вручную. Этот параметр можно легко упустить из виду.
Убедитесь в том, что каталоги сервера Exchange Server добавлены в
антивирусной программе в список каталогов, которые проверять не
надо. Дополнительные сведения о настройке антивирусных программ для
совместной работы с сервером Exchange Server см. в статье 823166
базы знаний Майкрософт, Использование антивирусных программ на сервере
Exchange Server 2003. - Проверьте файлы журналов антивирусной программы, чтобы
убедиться в том, что файл журнала Exchange был отправлен на
карантин или удален.
Восстановите файл журнала Exchange, используя один из описанных
ниже способов.
Способ 1. Если файл журнала Exchange был отправлен на карантин
-
Восстановите журнал Exchange в папку, содержащую файлы
журналов рабочей среды. -
Запустите службу банка данных Microsoft
Exchange. Если все остальные файлы журналов имеются в наличии,
база данных подключается. Если другие файлы журналов отсутствуют,
посмотрите, нет ли их в папке карантина антивирусной программы.
Если их там нет, см. способ 2.
Если файл журнала Exchange был удален, необходимо
восстановить базу данных группы хранения из резервной копии. Затем
необходимо преобразовать файлы журналов. Чтобы восстановить
имеющуюся базу данных, выполните следующие действия.
Способ 2. Если файл журнала Exchange был удален
-
Переместите все несогласованные базы данных в папку
резервных копий. -
Если был создан новый файл E00.log, переместите его в
папку резервных копий. Кроме того, переместите в нее файл
E00.chk. -
Скопируйте все существующие файлы журналов в папку
резервных копий.Примечание.
Необходимо скопировать файлы журналов. а не переместить. -
Присвойте последнему файлу E00*.log имя E00.log.
-
Восстановите базу данных из резервной копии. После
этого преобразуйте файлы журналов. Это приведет базу данных в
согласованное состояние. Однако база данных не будет включать файл
E00.log, который был скопирован в папку резервных копий. Несмотря
на утрату некоторых данных, теперь базу данных можно
подключить.Примечание.
Если базу данных не удается восстановить из резервной копии,
запустите для нее программу восстановления, чтобы перевести базу
данных в согласованное состояние. -
Запустите службу банка данных Microsoft
Exchange.
Если команда восстановления eseutil /p была выполнена
для неисправных баз данных и файлы журнала не были удалены,
выполните следующие действия.
Определение того, была ли выполнена команда eseutil /p
-
Нажмите кнопку «Пуск», выберите пункт «Выполнить»,
введите «cmd» и нажмите кнопку ОК. -
Введите в командной строке следующую команду:
Копировать код
c:program filesexchsrvrbineseutil /mh "c:program filesexchsrvrmdbdata<name of Exchange database.edb>"
Синтаксис данной команды основан на следующих
предположениях:- Программные файлы Exchange Server были установлены в папку
c:program filesexchsrvr. - База данных находится в папке c:program
filesexchsrvrmdbdata.
- Программные файлы Exchange Server были установлены в папку
-
Прочитайте значение атрибута «количество исправлений».
Если оно равно нулю, команда eseutil /p не выполнялась. Если оно
отлично от нуля, команда eseutil /p была выполнена для базы
данных.
Если общие и частные базы данных находятся в
согласованном состоянии или состоянии чистого отключения, файлы
журнала транзакций можно переместить в другую папку. Чтобы
определить, находятся ли базы данных в этих состояниях, выполните
следующие действия.
Определение того, находятся ли базы данных в согласованном
состоянии или состоянии чистого отключения
-
Нажмите кнопку «Пуск», выберите пункт «Выполнить»,
введите «cmd» и нажмите кнопку ОК. -
Чтобы проверить частный банк данных, выполните
следующую команду:Копировать код
c:program filesexchsrvrbineseutil /mh "drive:program filesexchsrvrmdbdatapriv1.edb"
-
Чтобы проверить общий банк данных, выполните следующую
команду:Копировать код
c:program filesexchsrvrbineseutil /mh "drive:program filesexchsrvrmdbdatapub1.edb"
Синтаксис приведенных в примерах 2 и 3 команд основан
на следующих предположениях:- Файлы сервера Exchange Server были установлены в папку
c:program filesexchsrvr. - База данных находится в папке c:program
filesexchsrvrmdbdata.
- Файлы сервера Exchange Server были установлены в папку
-
Изучите результаты проверки согласованности. Если база
данных является согласованной (находится в состоянии чистого
отключения), это означает, что все файлы журналов были сохранены в
банке данных. Если база данных не является согласованной (находится
в состоянии неправильного отключения), это не означает, что она
повреждена. Возможно, файлы журналов еще не были сохранены в
ней. -
Если база данных находится в состоянии чистого
отключения, переместите все файлы журналов из всех каталогов
mdbdata в папку резервных копий. -
Подключите базы данных.
Если команда восстановления eseutil /r была выполнена с
неправильным основным именем файла журнала, выполните ее с
правильным параметром. К универсальным основным именам файлов
журналов относятся имена e00, e01, e02 и e03. Например, в следующей
команде указано правильное основное имя файла журнала:
eseutil /r e00
Если после выполнения описанных выше действий проблема
не исчезнет, обратитесь в службу поддержки пользователей корпорации
Майкрософт. Дополнительные сведения см. на странице «Контакты»
веб-узла Справка и поддержка Microsoft.
Since I could not find a list of the Event Ids that was accurate at all or not too general as to be useless and Microsoft won’t let us know how to fix these ourselves without having a programming degree, I am begging for help from anyone who can help
me get my computer working right again. I have some important things to get done which I can’t do without my computer working. I have tried to get what I could get but I am blocked from many files which makes it difficult to get info. Please help. I appreciate
any help I can get. Thank you,
WhiteFox42
I am not sure which one is more important.
Event id 20
Installation Failure: Windows failed to install the following update with error 0x80070643: Update for Microsoft .NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008, Windows Server 2008 R2 for x64-based Systems
(KB2468871).
Event id 11
Possible Memory Leak. Application (C:WindowsSystem32svchost.exe -k LocalServiceNetworkRestricted) (PID: 476) has passed a non-NULL pointer to RPC for an [out] parameter marked [allocate(all_nodes)]. [allocate(all_nodes)] parameters are always
reallocated; if the original pointer contained the address of valid memory, that memory will be leaked. The call originated on the interface with UUID ({3f31c91e-2545-4b7b-9311-9529e8bffef6}), Method number (20). User Action: Contact your application
vendor for an updated version of the application.
Event id 455
taskhost (1348) WebCacheLocal: Error -1811 (0xfffff8ed) occurred while opening logfile R:UserApp DataRoamingMicrosoftTemplatesLocalMicrosoftWindowsWebCacheV01.log.
Event Xml:
Event id 505
wuaueng.dll (1012) SUS20ClientDataStore: An attempt to open the compressed file «C:WindowsSoftwareDistributionDataStoreDataStore.edb» for read / write access failed because it could not be converted to a normal file. The open file operation
will fail with error -4005 (0xfffff05b). To prevent this error in the future you can manually decompress the file and change the compression state of the containing folder to uncompressed. Writing to this file when it is compressed is not supported.
Event id 513
Cryptographic Services failed while processing the OnIdentity() call in the System Writer Object
Event id 1000
Faulting application name: IEXPLORE.EXE, version: 11.0.9600.16428, time stamp: 0x525b664c
Faulting module name: IEFRAME.dll, version: 11.0.9600.16476, time stamp: 0x52944cf2
Exception code: 0xc0000005
Fault offset: 0x00025f1d
Faulting process id: 0x1854
Faulting application start time: 0x01cf0735f0e5f0c7
Faulting application path: C:Program Files (x86)Internet ExplorerIEXPLORE.EXE
Faulting module path: C:Windowssystem32IEFRAME.dll
Report Id: e3dc1e9a-733f-11e3-b920-00215a2af202
Event id 1000
Faulting application name: msiexec.exe, version: 5.0.7601.17514, time stamp: 0x4ce79d93
Faulting module name: msvcrt.dll, version: 7.0.7601.17744, time stamp: 0x4eeb033f
Exception code: 0xc0000005
Fault offset: 0x00000000000035e1
Faulting process id: 0x1030
Faulting application start time: 0x01cf01b77867a358
Faulting application path: C:Windowssystem32msiexec.exe
Faulting module path: C:Windowssystem32msvcrt.dll
Report Id: f7253b17-6daa-11e3-b944-00215a2af202
Event id 1002
Computer: w7mar-64 «I don’t know why it has computer as this when it should not be.»
Description:
The IP address lease 192.168.200.195 for the Network Card with network address 0x08002742F261 has been denied by the DHCP server 192.168.200.1 (The DHCP Server sent a DHCPNACK message).
Event id 1008
The Windows Search Service is starting up and attempting to remove the old search index {Reason: Index Corruption}.
Event id 1008
Computer: w7mar-64
Description:
An errorUser: LOCAL SERVICE
occurred in initializing the interface. The error code is: 0x2.
Event id 1014
User: NETWORK SERVICE
Computer:
Description:
Name resolution for the name wpad.westell.com timed out after none of the configured DNS servers responded.
Event id 1015
User: N/A
Computer: w7mar-64
Description:
Event ID 1013 for the Windows Search Service has been suppressed 7 time(s) since 12:04:10 PM. This event is used to suppress Windows Search Service events that have occurred frequently within a short period of time. See Event ID 1013 for further details
on this event.
Event id 1015
Failed to connect to server. Error: 0x8007043C
Event id 1018
The description for Event ID 1018 from source EvntAgnt cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
Event id 1020
Updates to the IIS metabase were aborted because IIS is either not installed or is disabled on this machine. To configure ASP.NET to run in IIS, please install or enable IIS and re-register ASP.NET using aspnet_regiis.exe /i.
Event id 1028
Windows Installer has determined that its configuration data cache folder was not secured properly. The owner of the key must be either Local System or BuiltinAdministrators. The existing folder will be deleted and re-created with the appropriate security
settings.
Event id 1101
.NET Runtime Optimization Service (clr_optimization_v4.0.30319_32) — Failed to compile: System.Web.Entity.Design, Version=3.5.0.0, Culture=Neutral, PublicKeyToken=b77a5c561934e089, processorArchitecture=msil . Error code = 0x80010108
Event id 1500
The description for Event ID 1500 from source SNMP cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
Event id 1530
Windows detected your registry file is still in use by other applications or services. The file will be unloaded now. The applications or services that hold your registry file may not function properly afterwards.
Event id 1530
Windows detected your registry file is still in use by other applications or services. The file will be unloaded now. The applications or services that hold your registry file may not function properly afterwards.
DETAIL —
6 user registry handles leaked from RegistryUserS-1-5-21-2959539970-205720217-4182857889-1000:
Process 1020 (DeviceHarddiskVolume2WindowsSystem32svchost.exe) has opened key REGISTRYUSERS-1-5-21-2959539970-205720217-4182857889-1000Software
Process 1020 (DeviceHarddiskVolume2WindowsSystem32svchost.exe) has opened key REGISTRYUSERS-1-5-21-2959539970-205720217-4182857889-1000SoftwareMicrosoftWindowsCurrentVersionInternet Settings
Process 1020 (DeviceHarddiskVolume2WindowsSystem32svchost.exe) has opened key REGISTRYUSERS-1-5-21-2959539970-205720217-4182857889-1000SoftwareMicrosoftWindowsCurrentVersionInternet Settings
Process 1020 (DeviceHarddiskVolume2WindowsSystem32svchost.exe) has opened key REGISTRYUSERS-1-5-21-2959539970-205720217-4182857889-1000SoftwarePoliciesMicrosoftWindowsCurrentVersionInternet Settings
Process 1020 (DeviceHarddiskVolume2WindowsSystem32svchost.exe) has opened key REGISTRYUSERS-1-5-21-2959539970-205720217-4182857889-1000SoftwareMicrosoftInternet ExplorerMain
Process 1020 (DeviceHarddiskVolume2WindowsSystem32svchost.exe) has opened key REGISTRYUSERS-1-5-21-2959539970-205720217-4182857889-1000SoftwarePolicies
Event id 3028
Context: Windows Application, SystemIndex Catalog
Details:
The content index catalog is corrupt. (HRESULT : 0xc0041801) (0xc0041801)
Event id 3029
Context: Windows Application, SystemIndex Catalog
Details:
The content index catalog is corrupt. (HRESULT : 0xc0041801) (0xc0041801)
Event id 3036
The content source <csc://{S-1-5-21-2959539970-205720217-4182857889-1001}/> cannot be accessed.
Event id 3036
No protocol handler is available. Install a protocol handler that can process this URL type. (HRESULT : 0x80040d37) (0x80040d37)
Event id 4104
Description:
The backup was not successful. The error is: Access is denied. (0x80070005).
Event id 4228
TCP/IP has chosen to restrict the scale factor due to a network condition. This could be related to a problem in a network device and will cause degraded throughput.
Event id 4321
The name «WHITEFOXPC :0» could not be registered on the interface with IP address 192.168.1.21. The computer with the IP address 192.168.1.19 did not allow the name to be claimed by this computer.
Event id 4373
The description for Event ID 4373 from source NtServicePack cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
Event id 4879
MSDTC encountered an error (HR=0x80000171) while attempting to establish a secure connection with system WHITEFOXPC.
Event id 6000
The winlogon notification subscriber <GPClient> was unavailable to handle a notification event.
Event id 6006
The winlogon notification subscriber <TrustedInstaller> took 186 second(s) to handle the notification event (CreateSession).
Event id 7000
The Windows Audio service failed to start due to the following error:
A privilege that the service requires to function properly does not exist in the service account configuration. You may use the Services Microsoft Management Console (MMC) snap-in (services.msc) and the Local Security Settings MMC snap-in (secpol.msc) to view
the service configuration and the account configuration.
Event id 7001
The Computer Browser service depends on the Server service which failed to start because of the following error:
The dependency service or group failed to start.
Event id 7010
The index cannot be initialized.
Details:
The content index catalog is corrupt. (HRESULT : 0xc0041801) (0xc0041801)
Event id 7023
The Block Level Backup Engine Service service terminated with the following error:
%%-2147024713
Event id 7024
The Windows Search service terminated with service-specific error %%-1073473535.
Event id 7026
The following boot-start or system-start driver(s) failed to load:
aswKbd
aswRvrt
aswSnx
aswSP
aswTdi
aswVmm
discache
spldr
Wanarpv6
Event id 7030 & 7031
The dldw_device service is marked as an interactive service. However, the system is configured to not allow interactive services. This service may not function properly.
Event id 7032
The Service Control Manager tried to take a corrective action (Restart the service) after the unexpected termination of the Windows Installer service, but this action failed with the following error:
An instance of the service is already running.
Event id 7040
The search service has detected corrupted data files in the index {id=4700}. The service will attempt to automatically correct this problem by rebuilding the index.
Event id 7042
The Windows Search Service is being stopped because there is a problem with the indexer: The catalog is corrupt.
Details:
The content index catalog is corrupt. (HRESULT : 0xc0041801) (0xc0041801)
Event id 8210
An unspecified error occurred during System Restore: (Installed Java 7 Update 45). Additional information: 0x80070003.
Event id 9000
The Windows Search Service cannot open the Jet property store.
Details:
0x%08x (0xc0041800 — The content index database is corrupt. (HRESULT : 0xc0041800))
Event id 10005
DCOM got error «1084» attempting to start the service MSIServer with arguments «» in order to run the server:
{000C101C-0000-0000-C000-000000000046}
Event id 10010
15 of these with different server codes which I can’t copy unless I copy all the details.
The server {3EEF301F-B596-4C0B-BD92-013BEAFCE793} did not register with DCOM within the required timeout.
Event id 12348
Volume Shadow Copy Service warning: VSS was denied access to the root of volume \?Volume{8e79517c-6c41-11e3-b621-cb03f0618d54}. Denying administrators from accessing volume roots can cause many unexpected failures, and will prevent VSS from functioning
properly. Check security on the volume, and try the operation again.
Event id 15006
9 of these.
Description:
Owner of the log file or directory SystemRootSystem32LogFilesHTTPERRhttperr1.log is invalid. This could be because another user has already created the log file or the directory.
Event id 31004
33 of tese.
The DNS proxy agent was unable to allocate 0 bytes of memory. This may indicate that the system is low on virtual memory, or that the memory manager has encountered an internal error.
The End.
Kimberly D. White-Fox
Одобрено: ASR Pro
Повысьте производительность вашего компьютера с помощью этой простой загрузки. г.
Если в вашей системе появляется текущая ошибка eseutil / mh 1811, большинство из нас надеется, что это сообщение в блоге может вам помочь.Неисправность 1811 Exchange также возникает, когда вы пытаетесь дефрагментировать почтовый ящик с помощью полезной нагрузки eseutil на внешней стороне Интернета. В этом случае желательно, чтобы вы вводили правильный путь к папке и блокировали удивительный путь к папке в кавычках. Приглашаются все, кто ищет решение для исправления ошибки 1811 Exchange Jet.
Ошибки Jet Engine серьезно трудно исправить, и они могут легко повредить весь файл базы данных Exchange. В большинстве случаев здесь тип ошибки легко исправить, но, опять же, когда дело доходит до Exchange Jet Error One 1811, некоторые детали требуются для ее улучшения.
Microsoft Exchange относится к наиболее широко используемым платформам обмена сообщениями, тем не менее, Exchange, как и другие приложения Microsoft, подвержен сбоям. Решить их непросто, особенно когда игра доходит до реальных ошибок, таких как сбои Exchange Jet.
Поэтому в этой статье мы действительно пытаемся понять ошибку, такую как Jet Error 1811, каковы ее возможные причины, а также как ее эффективно исправить. Но сначала, если вы сообщите нам, когда возникает эта альтернативная ошибка 1811.
Совет от профессионалов: если вы получаете доступ к ошибкам в файлах базы данных, таких как Priv.edb или Pub.edb, из-за повреждения Exchange, вы можете попробовать SysTools Exchange Recovery Tool EDB для восстановления файлов баз данных собак. Вы можете отремонтировать и восстановить свой почтовый ящик Exchange как можно скорее, а также увидеть, как восстанавливаются поврежденные файлы базы данных Exchange Server при разработке с использованием программного обеспечения, поддерживающего восстановление, и принимать меры, которые помогут вам исправить файл Exchange 2016 EDB, 2013 и позже. некоторые из следующих поддерживаемых версух.
После успешного восстановления из всех файлов базы данных Exchange и, кроме того, из почтовых ящиков, вы можете легко экспортировать восстановленные почтовые ящики Exchange в Live Exchange Server, O365 и во все другие форматы приложений.
Как Exchange Jet получил ошибку 1811?
Это одна из самых распространенных ошибок, с которыми сталкиваются пользователи. Это происходит, когда администраторы или, возможно, пользователи запускают .ose из cmd, поскольку компьютер подключен напрямую к серверу обмена. Из-за этой ошибки владельцы не могут получить доступ к своим почтовым ящикам и, следовательно, не будут иметь права на другие действия.Торговая ошибка выглядит так:
â € œ доступ к исходному источнику чисел. «Mdbdata priv2.edb» с сообщением об ошибке Jet 1811 не удалось »
Программа, в которой произошла ошибка, может сохранить в вашей системе другой путь. Эта ошибка Exchange 1811 может возникать по разным причинам при запуске инструмента Eseutil.
Определите причину ошибки 1811 Exchange Jet
Может быть несколько причин, по которым вы по-прежнему получаете ошибки здесь. Вот некоторые из детей:
- Сервер Exchange некорректно закрывался на бумаге.
- Неверно. Сильная установка из-за того, что приложение.
- Вторжение вредоносного ПО
- Отправка журнала удалена.
- Неистовство силы
- Файл документации Exchange отсутствует.
- Несоответствие номера модели частного журнала файла журнала Exchange
- Файл журнала не соответствует уникальной подписи
Исправлена ошибка Exchange Jet 1811 при различных сценариях
Давайте обсудим различные сценарии, в которых вы можете увидеть ошибку в Exchange с его сделками:
1. Возможно, все из-за ваших файлов журнала Exchange могут быть случайно стерты или утеряны, поэтому вам нужно будет обслуживать файл из файлов журнала культуры, если вы используете Exchange Information So Restore.
2. Тут же может быть другой случай, если все песни отсутствуют. В этом случае вам нужно будет проверить, сохранены ли эти файлы под этой антивирусной программой.
3. Иногда при входе в файл журнала возникает ошибка 1811 Exchange Jet. Он генерирует конкретный идентификатор события с деревом талантов 455 «Сигнальный файл в настоящее время отсутствует». Причина в основном в объекте конфигурации между сервером обмена и запущенной программой. Карантин ParameterAntivirus, вероятно, включен, но троянец не настроен и поэтому. В этом случае сделайте следующее:
- Остановите все службы Exchange Server и настройте вредоносное ПО.
- Ваши текущие файлы теперь будут сохраняться в постоянной папке.
- Удалить почти все * файлы в MDBDATA
- Проверьте файл, файлы должны быть только в e00.chk, res1.log и, как следствие, в res2.log.
- В противном случае переместите все дополнительные данные записей во временную папку.
4. Иногда владельцы получают ошибку -1811 = = 4294966274 0xfffff8ed равно Jet_errFileNotFound. Это происходит, когда файл определенно не находится в найденном месте. Причина в том, что в равной степени отсутствует файл базы данных или вы показали историю людей и базу данных Exchange в этом магазине Socialize. Вы можете исправить это, а также файл с ошибкой, проверив его целостность и убедившись, что он имеет правильные разрешения.
Одобрено: ASR Pro
ASR Pro — самый популярный и эффективный в мире инструмент для ремонта ПК. Миллионы людей доверяют ему обеспечение быстрой, бесперебойной и безошибочной работы своих систем. Благодаря простому пользовательскому интерфейсу и мощному механизму сканирования ASR Pro быстро находит и устраняет широкий спектр проблем Windows — от нестабильности системы и проблем с безопасностью до проблем с управлением памятью и производительностью.
5. Ошибка Exchange 1811 также возникает при попытке дефрагментировать эти автономные почтовые ящики с помощью команды eseutil. В некоторых случаях убедитесь, что вы ввели правильный путь к каталогу и в основном заключаете путь к каталогу только в двойные кавычки.
![]()
Также читайте: исправление ошибки Exchange Jet 1018
Заключение:
Любой, кто обычно ищет решение проблемы Exchange Jet Error 1811, может быть здесь. В блоге четко показаны различные возможные сценарии получения Exchange Jet 1811 и связанного с ним решения. Если по какой-либо уважительной причине ваши файлы базы данных Exchange Web Server станут поврежденными, в блоге есть все типы мгновенных профессиональных услуг для исправления этих файлов.
Об основателе
Ашвани Тивари
Как главный технический оператор, я осведомлен о технических деталях, с которыми пользователи сталкиваются при работе с несколькими программными продуктами. Поэтому с помощью моих информационных сайтов и статей мне нравится помогать всем конечным пользователям, которые сталкиваются с различными проблемами вместе с технологиями.
Повысьте производительность вашего компьютера с помощью этой простой загрузки. г.
г.
Summary: In this post, we’ve discussed the ways to fix the error: Operation terminated with error -1811 (JET_errFileNotFound, File not found). You can perform soft/hard recovery or restore from backup to resolve the issue. We’ve also mentioned a third-party tool that can help fix the error by repairing and restoring the corrupt database in just a few steps.
Contents
- Why Do Exchange Server Databases Get Corrupt?
- What Happens If a Database Gets Corrupt?
- Ways to Fix the Error: Operation Terminated with Error -1811 (JET_errFileNotFound, File Not found)
Microsoft Exchange Server works with different files to maintain consistency and health of the databases in the setup. An Exchange Server creates EDB file, which is the main database file that holds all the information. To prevent the file from being locked, corrupted, and to keep high performance of the data being accessed, the database uses a combination of transaction log files and stores information in memory. It uses both transaction logs and memory as a buffer to increase performance and prevent the database from getting corrupted. Once an application backup of the server is executed and a healthy backup is taken, the database purges the transaction logs since these were committed to the database during a backup.
The transaction logs cannot be purged manually as these hold temporary data before being committed to the database. If a transaction file is manually deleted, you may encounter data loss and even corruption in the database.
As mentioned, in a normal scenario, after taking backup with a backup software which is built for and supports the Exchange Server version you have installed, the transaction logs are automatically purged during the daily backups. If the transaction logs keep increasing and never purged, it means that there are issues with your Exchange Server, backup application, or there is something which is locking or preventing the Exchange to purge the files.
Why Do Exchange Server Databases Get Corrupt?
There could be many reasons that may lead to corruption in database. Some common ones are:
- Hardware failure (storage, motherboard, or others)
- Sudden loss of power which will not allow the database to safely shut down
- Malware, virus, or ransomware attack
- Issues during patching or update installation
- Consequences from no disk space on the data or log partition/drive
What Happens If a Database Gets Corrupt?
Usually when a database file (EDB) is corrupt, there could be items in the database which are damaged. If a transaction file is corrupt or missing, Exchange database will fail to mount. You can use the native tools – Eseutil for Repairing Exchange databases.
In this article, we are going to explore one of the many errors message that could occur during such situations.
When the database fails to mount and you use EseUtil to check the status of the database, you may get the following error:
Error: Access to source database ‘.edb’ failed with Jet error -1811.
Operation terminated with error -1811 (JET_errFileNotFound, File not found)
This error occurs when you run the command with the following parameter and you run out of disk space.
Eseutil /mh <database.edb>
Since Exchange database is not mounted, you will immediately know that the issue is critical since all the users will start complaining that they cannot send/receive their emails.
Ways to Fix the Error: Operation Terminated with Error -1811 (JET_errFileNotFound, File Not found)
Here are some ways to fix the issue at the earliest and restore the services:
- Perform a soft recovery using eseutil/r
- Perform a hard recovery using eseutil/p
- Restore from backup
- Use a third-party tool
Perform Soft Recovery
With EseUtil, you can perform a soft or hard recovery. The soft recovery would help you to fix small, corrupted items in the database. You should try it first to fix your database. You should never try to run a hard recovery first. This should always be used as the last resort.
To perform soft recovery, run the following command:
Eseutil /r /d “<path to your database file>”
An example would be:
Eseutil /r /d “M:ExchangeDatabasesDB01”
Depending on the size of the database, the process may take some time. Once done, run the EseUtil with the /mh parameter to check the status of the database. If it shows the status as Healthy Shutdown, you can mount Exchange database.
Perform Hard Recovery
If the soft recovery does not fix the error: Operation terminated with error -1811 (JET_errFileNotFound, File not found), you need to perform the hard recovery.
Caution: You should take a backup of the database before proceeding with hard recovery. You have to accept data loss as hard recovery will purge any data or information that is deemed corrupted. Also, after the hard recovery, your database will have a hard coded tag. If you request Microsoft to assist after you run it, you will not be supported as it breaches the SLA.
To perform the hard recovery, run the following command:
Eseutil /p “<path to your database file in full>”
An example would be:
Eseutil /p /d “M:ExchangeDatabasesDB01db01.edb”
After this, you can mount the database. However, it is not 100% sure that this would fix the problem.
Restore From Backup
You can also try to restore Exchange database from a previous healthy backup. However, you will end up losing all the data post the backup.
Use a Third-Party Tool
As an alternative, you can use Stellar Repair for Exchange. The application can open corrupted databases of any Exchange Server version. You can recover all the mailboxes and public folders and save them in PST and other formats. You can also export items and mailboxes granularly to a live Exchange Server database or an Office 365. Stellar Repair for Exchange will drastically reduce the recovery time of your services and reduce the data loss.
About The Author
Ravi Singh
Ravi Singh is a Senior Writer at Stellar®. He is an expert Tech Explainer, IoT enthusiast, and a passionate nerd with over 7 years of experience in technical writing. He writes about Microsoft Exchange, Microsoft 365, Email Migration, Linux, Windows, Mac, DIY Tech, and Smart Home. Ravi spends most of his weekends working with IoT (DIY Smart Home) devices and playing Overwatch. He is also a solo traveler who loves hiking and exploring new trails.
Best Selling Products
Stellar Repair for Exchange
Software recommended by MVPs & Administr
Read More
Stellar Toolkit for Exchange
5-in-1 suite of specialized tools, highl
Read More
Stellar Converter for EDB
Stellar Converter for EDB is a professio
Read More
Stellar Converter for OST
Powerful software trusted by Microsoft M
Read More
Resolve Exchange Jet Error 1811 With Different Scenarios
Jet Engine errors are quite hard to resolve and can easily harm your Exchange database file. Majority of time these errors get easily resolved, but when it comes to Exchange Jet error 1811 one must require profound information to fix it.
Microsoft Exchange is one of the most popular utilized emailing platform, however like other applications, Microsoft Exchange is also vulnerable to number of errors. Resolving them is a tedious task especially when it comes with real blunder issues like Exchange Jet errors .
Hence, in this article, we are going to understand one such blunder is Jet error 1811, what are the possible reasons behind it and how can it be settled in an effective way. But first let us understand when this Exchange Error 1811 comes.
Pro Tip: If in case, you are getting an error due to corruption issue found in Exchange database files like Priv.edb or Pub.edb, then you can try SysTools Exchange EDB Recovery Tool for repairing its database files. You can quickly recover & repair Exchange mailbox and fix your corrupted Exchange Server database files by using this software which supports to recover and repair EDB file Exchange 2016, 2013 & all its below versions.
After the successful recovery of the Exchange database file and mailboxes, you can export the recovered Exchange mailboxes into Live Exchange Server, O365 and different file formats in a simplified way.
How Exchange Jet Error 1811 Encounter?
The error is one of the most common error faced by the users. It comes when the administrators or the users execute eseutil.ese from cmd where machine is connected to the Exchange Server. Due to this error, users become inaccessible to their mailboxes, hence, not be able to perform other activities.
Error generated by Exchange is as follows:
“Access to the source database. ‘…mdbdatapriv2.edb’ failed with jet error 1811”
It could be the possibility that the error code contain different path in your system. There could be various reasons why this Exchange error 1811 occur, running Eseutil tool, user is in no mount state while trying to fix database corruption are some of the reasons why this error occurs.
Know the Cause Exchange Jet Error 1811
There could be number of reasons of getting this error. Some of them are as below:
- Unclean Shutdown of Exchange Server
- Inappropriate installation of an application
- Malware Intrusion
- Deleted Log file
- Power Outrage
- Missing Exchange Log file
- Mismatch between Exchange Log file signature Log generation number
- Mismatch Log file with its original signature
Fix Exchange Jet Error 1811 with Different Scenarios
Let us discuss various scenarios of getting this error in Exchange with its solution :
1. It could be the possibility that your Exchange log files get accidentally deleted or get misplaced, for that you need to use “Exchange Information Restore” so that you can recover the file from the production log files.
2. Another case could be if there is no missing file. For that case you need to check whether the files are stored under the Anti-Virus Program.
3. Sometimes Exchange Jet Error 1811 occurs while opening the log file. It generates an Event ID of 455 stating ‘currently log file is missing’. Reason being an issue in configuration between the Exchange Server and the currently running program. Or an Anti-Virus Quarantine option is enabled but the antivirus is not configuring accordingly.For that case, Perform the following steps:
- Stop all services of Exchange Server & Configure your Anti-virus program
- Now save your current log files to a temporary folder
- Delete all *log files located in MDBDATA
- Check the folder, only e00.chk, res1.log & res2.log files must be present there.
- If not, transfer all the extra files present there to a temporary folder.
4. Sometimes user get Error -1811 = 4294966274 = 0xfffff8ed = Jet_errFileNotFound. This occur when file is not found at the location. Reason being the missing database file or you have located your log files and Exchange database on network storage. You can resolve it by checking the file in which you are facing error, check its integrity and ensure it must have proper access permissions.
5. The Exchange error 1811 also occurs when you try to do an offline defrag of the mailbox using command eseutil. In this case, make sure you have entered correct folder path and enclose your folder path in double quotation marks.
Also Read: Fix Exchange Jet Error 1018
Conclusion:
For all those users who are looking for a solution to fix Exchange Jet Error 1811 are welcomed here. The blog discusses various possible scenarios of getting Exchange Error 1811 and the solution associated with it. If, somehow your exchange server database files got corrupted due to any of the reason, the blog covers an instant solution for repairing those files.
- Remove From My Forums
-
Question
-
when i run Eseutil /mh «databasename». I got Like some error message that is
Initiating FILE DUMP mode…
Error: Access to source database ‘ mailbox database.edb’ failed with Jet error -1811.Operation terminated with error -1811 (JET_errFileNotFound, File not found) after 0.234 seconds.
Answers
-
Hello,
Please verify if the database is dismounted.
If the database is dismounted, please verify if there is mailbox database folder as following path: C:program filesMicrosoftExchange serverv14mailboxmailbox database folder.
Please restart Information store services and check the result.
Please check if there is any error in application log.
Best Regards,
Lisa
-
Marked as answer by
Thursday, November 8, 2012 7:59 AM
-
Marked as answer by
When administrators execute eseutil.ese utility from the command line where the machine is connected to the Exchange server, they
encounter Code error and Exchange Jet Error 1811 is one most common error faced by the user still, but due to error user not able to run other command and can’t access their mailboxes not able perform other activities. Since error display the description and a reason of its occurrence, and the id of malfunctioned system or program but it become not easy to naive user easily, For that, in below section, manually method are described properly fix the Jet Error 1811 for Exchange Server 2013, 2010, 2007 and 2003 versions.
The numeric part in name comprises of the data, which can be decrypted by the malfunctioned device or program manufacturer. It might be possible that the error statement with this code appears in the different path in the system, which means that it is going to be more complicated for pointing out the error and hence, the solution to troubleshoot it.
Conditions – Eseutil Exchange Jet Error 1811 Occur Server
After searching on the Web get various Situation when user faced a Pop appears with message Error “Access to the source database. ‘…mdbdatapriv2.edb’ failed with jet error 1811” in Exchange 2003, 2007,2010, 2013 Server.
- When a user tries to Defrag the mailboxes of Exchange.
- Sometimes user gets error After Running the Extensible Storage Engine Utility (Eseutil) in Exchange 2007 Server.
- Even after Running eseutil /d on Store.
- While fixing Data Corruption in Exchange 2013, 2010 and 2007 version and user not able to mount the database
Read Also: Resolve Error JET_errRecordNotFound
Common Cause of Exchage Jet Error 1811 in Server
This error mostly arises due to the mismatch between the Exchange Log file signature and log generation number file. Sometimes due to various issues or malfunction in the system activities or programs leads to this error occurrence. Basic reasons behind this involve:
- Improper or interrupted Un-installation or installation of an application
- High consequences of the virus or Malware attacks
- The sudden shutdown of the machine due to Power failure
- Accidental Deletion of essential system files or registry
Generally, Log file in Server Known as E00.log file and if this file has not the common signature, then even the database of Exchange Server is consistent, still user not able to mount the database.
Solution to Fix Exchange 2010/ 2013 /2016 Eseutil Jet Error 1811
It is a hit and trial measure to get rid of this issue manually. Users can try all the methods one by one to resolve this Exchange server error 1811:
- A user to need to verify that whether any Anti-Virus program is able to read Exchange Service Files. If any Exchange log files are missing or deleted then try to recover that file from the production log file for that user need to use “Exchange Information Store”.
- If there is no file is missing then the database will otherwise user need to check whether the file stored in Folder of Anti-Virus Program File.
Solution When Log File is Deleted
- If Exchange log file is deleted then the user to first create a backup of the database and store them into a Backup folder. If any log file creates with name “EOO.log File”, you need to also Copy this file to the backup folder. If you see E00.chk file then Copy this file.
- Now rename the file E00*.log file to E00.log and restore the Dismounted again and replay the log files which helps Mailbox to move on the Consistent state. If still the Database not to move to Consistent state then try to run repair commands.
In Technical terms Error code, 1811 denotes that IS is unable to locate the file. This can either be PRIV.EDB or PUB.EDB, which means that error is caused due to log file missing. To fix this, restore the previously backed up Exchange data and then, restart IS. If the problem does not get resolved then, move to the next measure.
- Now Look for ‘EDB*.LOG’ files in the MDBDATA directory and search for a non-broken sequential string of all the file names, numbered in hexadecimal. For example EDB0001a.LOG to EDB0003f.LOG and EDB.LOG. Check that there are no spaces present in their numbering scheme. If all of the files are presented as well as accounted then, there are chances that damaged EDB.CHK is present. Move this file to some another directory and restart IS.
- If the log files are absent then, the recovery procedure is going to be a little bit different. For example ‘edb0003f.log’ file is missing; in this case, you have to erase all the files that are numbered lower thank the 3f. Along with this, you also have to remove ‘EDB.CHK’ file and replay the log file again
Note: If the missing file is edb00030.log then, the files to be removed are edb00031.log to edb00030f.log along with edb.log and edb.chk Rename the edb0002e to EDB.LOG. You have to delete all the files residing after the one, which is missing.
Use Best Alternative Solution
If an error arises due to some corruption issue in Exchange Priv.edb or Pub.edb then a user can Go for Exchange EDB Repair Tool provided by SysTools i.e. specially designed to resolve Exchange mailbox corruption and recover/repair the Exchange database file. It provides dual scanning mode i.e. Quick and Advance scan option which easily recovers & repair pub1.edb as well as priv1.edb file from corruption.
Download Now Purchase Now
After the successful recovery of Exchange database mailboxes, users can use this advanced tool to extract mailbox from offline EDB file and export directly to Live Exchange 2016, 2013, 2010, 2007 2003 mailboxes, Office 365, and multiple file format in a hassle-freeway. Users can easily convert EDB to PDF, PST, EML, MBOX, MSG, HTML file.
Key Features Of Professional Software
- Support EDB and STM file
- Preview MS Exchange mailbox items before conversion
- Preserve maintain folder hierarchy & keep metadata intact
- Export EDB to PST, EML, HTML, MBOX, PDF, MSG file format
- Option to decrypt email from Exchange mailboxes in batch
- Compatible with all Microsoft Outlook, Exchange Server, and Windows OS version
Bringing It All Together
This write-up provide complete solution and explanation of Exchange Jet Error 1811 in Exchange Server 2013, 2010, 2007 and 2003 application helps the naive user to understand this issue and they can fix themselves using the techniques provided here. If you are new to Microsoft Exchange environment and finding difficult to resolve the issue, then users can use the advanced software described in the above section that easily remove corruption from EDB file and expport the mailboxes directly to Live Exchange Server. Hope it will be helpful for the administrator in troubleshooting the problem.
После запуска расширенного обработчика хранилищ (Eseutil.exe) из
командной строки на компьютере с Microsoft
Exchange Server 2007 выводится сообщение об ошибке Jet
1811, даже если операция завершается успешно.
Например, если выполнить команду eseutil .exe /K E00 из
командной строки, будет выведено следующее сообщение об ошибке:
Extensible Storage Engine Utilities для Microsoft(R) Exchange
Server
Версия 08.01
© Корпорация Майкрософт. Все права защищены.
Ошибка: Access to source database ‘E00’ failed with Jet error
-1811.
Инициализация режима контрольной суммы…
Проверка файлов журнала…
Базовое имя: E00
Файл журнала: E:Program FilesMicrosoftExchange
ServerMailboxFirst Storage
GroupE0000000030.log — OK
Файл журнала: E:Program FilesMicrosoftExchange
ServerMailboxFirst Storage
GroupE0000000031.log — OK
Файл журнала: E:Program FilesMicrosoftExchange
ServerMailboxFirst Storage
GroupE0000000032.log — OK
Поврежденных файлов журнала не обнаружено.
Операция завершилась успешно за 0,219 сек.
Причина
Такое сообщение об ошибке предусмотрено в
Exchange 2007. Его можно игнорировать.
While using ESEUTIL, users can sometimes face unexpected errors which can lead to complete mailbox inaccessibility. Resolving such errors is an uphill task especially since the information that appears along with the error message can be very cryptic. Stellar Phoenix Mailbox Exchange Recovery software acts as a one-stop solution for dealing with Exchange ESEUTIL errors and can play an instrumental role in bringing the Exchange server back online in such scenarios.
ESEUTIL is an easily accessible command-line utility for performing various complex tasks for the Exchange server. This inbuilt tool proves to be extremely helpful when it comes to fixing corrupted Exchange databases, defragmenting them, reducing their size, or checking their integrity. But sadly, ESEUTIL sometimes faces errors which cause it to terminate without completing its action which can cause damage to Exchange files and leave users in a soup with no access to their mailboxes and failure in executing other commands.
In such cases where ESEUTIL command fails to perform, reliable and competent software applications like Stellar Phoenix Mailbox Exchange Recovery come to the rescue and help users in overcoming their Exchange troubles. This post demonstrates this fact by describing a scenario where ESEUTIL fails with Jet error 1811 and Stellar Mailbox Recovery fixes the same quickly.
Problem Scenario – Exchange Jet Error 1811
When working with the Exchange server, initiating defragmentation procedures is a common thing. The defragmentation option makes used storage contiguous, eliminates unused storage, and reduces the database’s size by compacting it. The command used for this purpose is eseutil /d.
Usually, the above mentioned command executes flawlessly and delivers what it promises. However, in rare situations, it fails with the error “Access to the source database. ‘…mdbdatapriv2.edb’ failed with jet error 1811”. This error is typical in Exchange versions 2003, 2007, 2010, and 2013. Evidently, decrypting this error message can be very difficult especially for a user with limited Exchange error handling experience. Still, there are a few things that can be done to attempt resolving Jet Error 1811.
Exchange Jet Error 1811 – Causes & Common Solutions
A quick look across Exchange forums reveals that the primary causes for Jet Error 1811 are:
- A mismatch between Exchange log file signature and log generation number file
- System malfunctions like interrupted installation or un-installation of an application
- Virus / Malware infection to Exchange system files
- Accidental Deletion of essential system files or registry information
- Sudden shutdown of the machine due to power failure leading to corruption in the database
- EDB file corruption owing to sundry reasons
Since the reasons behind this error can expand over such vast proportions, decoding exactly what caused it in your case can become tough. Hence, try out the hit-and-trial solutions listed below one by one to attempt resolving it.
- Disable your anti-virus program and try mounting the Exchange database. If it works, add an exception in your anti-virus application for Exchange service files.
- Take a backup of all Exchange log files and then move the original log files to a different folder. Thereafter, rename the file E00*.log to E00.log and perform a full restore of the Exchange database by replaying log files.
- Restore Exchange database from a previous backed up. Thereafter, restart the Information Service
- Look for ‘EDB*.LOG’ files in the MDBDATA directory and search for a non-broken sequential string of all the file names, numbered in hexadecimal, for example, EDB0001a.LOG to EDB0003f.LOG and EDB.LOG. If all of the files are accounted for, there might be chances that your EDB.CHK file is damaged. Locate this file and move it to some another directory. Then restart the Information Service.
- If a particular log file is missing, all the log files that are numbered lower than the missing one will have to be deleted along with edb.log and edb.chk. After this, repair commands (eseutil /p) will need to be executed on the Exchange server. If they execute fine, next step will have to be recovery procedure using command eseutil /r.
There might be a high chance that even after you try out all the above fixes, Jet Error 1811 still exists. Such a condition is indicative of severe corruption in Exchange database files which can be fixed with the best Exchange server remedy, Stellar Phoenix Mailbox Exchange Recovery.
What to do if manual techniques fail?
If manual tricks don’t work the magic, place your trust in an application that is more accurate and proficient. Stellar Phoenix Mailbox Exchange Recovery will help you overcome Jet error 1811 and a majority of other Exchange Jet engine errors smoothly. Ranked as one of the most recommended software by MVPs, this product repairs corrupt Exchange Database (EDB) files and restores mailbox content which can be directly exported to Live Exchange or Office 365. You can also save individual email messages recovered from EDB files in a variety of formats like PST, MSG, EML, HTML, RTF, and PDF.
Through a simple 3-step procedure – select EDB file, scan-and-preview, and repair-and-recover – this software allows you to overcome the drawbacks of manual Exchange repair techniques and stay ahead of nasty issues. Equipped with a convenient GUI, this product saves your time and effort while helping you ensure that Exchange server stays problem-free. Read more about the product here: Stellar Phoenix Mailbox Exchange Recovery.
Wrapping it up
We hope that at this point you’re much more aware of Jet Error 1811, its prime causes, and ways to fix it at your end. As a general rule, keep your Exchange EDB files backed up and server software updated. Also, maintain an uninterrupted power supply to the Exchange server and add an exception for Exchange services in your anti-virus application and firewall. Lastly, keep Stellar Phoenix Mailbox Exchange Recovery handy since it is the best alternative to manual Exchange repair techniques and helps you bring Exchange back online regardless of how grave an error seems to be.
Microsoft Exchange platform is one of the popularly used email platforms. This platform is also like other platforms is unsafe from several errors. The good thing is these errors can be resolved easily. But few errors need extra efforts like to Fix Exchange Jet Error 1811 & 1032. This type of error can damage your whole EDB file if it is not fix quickly at a time.
In this Blog Post, I have shared the causes and the solution that helps you to Fix Microsoft Exchange Jet Engine Error. So let’s get start
Why Exchange Jet Error 1811 & 1032 Occurs?
This Microsoft jet database engine error can arise due to harm in Exchange Server Database or application level. Here is the list of Jet Engine errors when the Exchange Server is corrupt, due to an unexpected crash in hardware or Software.
- 1022 jet_errdiskio Error: This type of error arises when the limitations are done by the Input/Output Process stop Exchange Server to get access of targeted page in the Exchange Database. Also, this error can be the reason for the damaged file. When the user tries to access pages which is larger than the total number of pages.
- 1019 JET_errpagenotInitialized Error: Such an error can be faced when the user tries to get access to an empty page in the Exchange database. The main reason behind the empty page is damage to the file system.
- 1018 JET_err Read VerifyFailure – This error came when the wrong page number or incorrect check some is come across while the process of reading page. The withdrawal of the page heads results in a mismatch in the number of pages. As result, it corrupt the Exchange file
So here is the list of Jet Engine errors that can be arisen due to an unknown reason:
- The Jet VBA is not able to initialize. Re-Install the application once again
- JET_errRecord not available error
- 100 JET_err Rfsfailure
- Not capable to start DAO/Jet db engine
- Microsoft Jet database stops performing the process because you and the third user are changing the same data simultaneously.
Reasons behind the Eseutil Jet Error 1811
- Malfunctioning of hardware like hard drive, sudden power crash, damage to EDB mailbox
- When there is corruption in critical objects like the Exchange database due to registry and software errors
- When there is a mismatch between the JET or DAO file
- Missing or deleted Exchange log files leads to Eseutil jet error.
- When there is a false Exchange database recovery because third-party resources are incompatible with Exchange
Solutions to Fix Exchange Jet Error 1811 & 1032
Follow these methods to fix this ESEUTIL jet error 1811 error given below:-
Manual Method 1- Backing Up of Exchange Database
- Start the Windows Server Backup and select the local backup solution
- Select the backup once the option
- Then just tap on different options and click the next button
- You will see a select Backup configuration page
- Choose the custom option and click on the next to move further
- You can also select items for the backup page
- Press add items option and press OK to attach the needed volume
- With Advanced Settings Exclusions, you can exclude the file types
- Visit the VSS settings tab and choose VSS full backup tab and press OK
- Then you will see a window giving an option to select local drives or remote shared folders to save Exchange backup files to the destination
- Check the setting of backup in the confirmation tab, and click on the backup button
- Check the current backup process and then press the backup button
- You can view the backup progress using the backup progress tab. Check the backup files after the completion of the process.
Related Post:- How to Repair Priv1.edb Exchange 2003 Error
Manual Method 2- Using Various ESEUTIL Command
MS Exchange server has several commands that resolve the different types of corruption errors. All you need to do is to open the command prompt and select desired ESEUTIL command depending upon the requirements. Read out the given commands:
- ESEUTIL/c- To perform the hard recovery of the Exchange database
- ESEUTIL/m- You can use this command to take the exit from header information of the database
- ESEUTIL/D- Command facilitate the offline defragmentation of the Exchange database
- ESEUTIL/y- Used to assign the operation on large mailboxes of the database
- ESEUTIL/g- To check the integrity of the exchange database
- ESEUTIL/p- Basically, used to recover corrupt exchange database file. After this, the user needs to perform an offline defragmentation of the database
- ESEUTIL/R- For recovery operations on the exchange database
- ESEUTIL/K- To do the analysis of checksum values
You can use all these commands to Fix Exchange Jet Error 1811 & 1032. But these manual methods do not guarantee to keep data integrity. And you can also lose the information stored on the server.
Manual Method 3- Using Eseutil Repair Tool For Repairing Exchange Database
You can use the inbuilt tool of the Exchange server named Eseutil for fixing the damaged Exchange database. If you don’t know about the Eseutil repair tool here is a small overview of it.
What is eseutil used for?
ESEUTIL is the tool that is available for all Exchange server administrators. It can be used for various purposes like checking database status, repairing or defragmenting corrupt databases, and managing the database size.
In this tool, you’ll get 2 different soft recovery and hard recovery features for repairing the Exchange database.
Solution No.1- Soft Recovery for ESEUTIL Jet Error 1811
Every user should prefer to use soft recovery first in comparison to hard recovery. There is no risk on the soft recovery and by this, you’ll be able to fix corruption-creating issues in the Exchange database.
Follow the below steps for performing Soft Recovery:-
- Here you need to open the ESEUTIL tool and enter this command Eseutil /r /d “<path to your database file>”
- Here is the example:- Eseutil /r /d “M:ExchangeDatabasesDB01”
By entering all the above commands wait for few minutes to let the process complete. After the completion check the health status of the database by entering EseUtil with the /mh parameter command. And if the status is in a healthy state you can try to mount the database.
Solution No.2- Hard Recovery in ESEUTIL Repair Tool
If unfortunately, the soft recovery failed to resolve Exchange jet error 1811 then you can look for the hard recovery.
Caution:- Before performing the hard recovery I’d like to aware you that this process can lead to data loss or corruption. So make sure to take a backup of all Exchange databases before proceeding with the below steps.
Here are the steps of Hard Recovery with ESEUTIL:-
- Go to your ESEUTIL tool and put this command
Eseutil /p “<path to your database file in full>”
And you might see the windows given in the below screenshot after putting the command.
Remember there is no 100% guarantee to fix the issue. You can go with the automated tool mentioned in Method no.3.
SysInspire EDB to PST Converter
-
- This EDB to PST Converter software is designed with advanced techniques to Fix Exchange Jet Error 1811 & 1032 with preserving all email properties.
Download the software by visiting the below provided link.
Automated Method 3- Using SysInspire EDB to PST Converter Software
The software has the latest technology to eliminate any error related to the Exchange Server file. This EDB to PST Free software has many features listed below:-
- Quick Conversion of EDB file into working PST Outlook format
- The auto-detection feature means it can automatically locate the.EDB file location
- Multiple Conversion formats of EDB File such as EMLX, EML, MSG, HTML, and PST
- There is no limitation of the database for making EDB to PST Conversion
- Splitting feature to shorten the size of large PST file into various small-sized PST files
- Also maintains the data integrity during the conversion
Conclusion
You can use any manual and automated method but the manual methods come with many limitations. And to operate the manual method you need professional knowledge. So it is better to take the help of SysInspire EDB to PST Converter software that scans the EDB file and immediately Fix Exchange Jet Error 1811 & 1032.
Hi guys,
Had an issue with drive where the databases are running out of space.
Created more space and expanded the drive however now I get the message I am unable to mount the database. The full error is below:
Any ideas of what to do?
———————————————————
Microsoft Exchange Error
———————————————————
Failed to mount database ‘MailboxDatabase02’.
MailboxDatabase02
Failed
Error:
Couldn’t mount the database that you specified. Specified database: MailboxDatabase02; Error code: An Active Manager operation failed. Error The database action failed. Error: Operation failed with message: MapiExceptionJetErrorMissingLogFile: Unable to mount database. (hr=0x80004005, ec=-528)
. [Database: MailboxDatabase02, Server: MAIL.aspirationscare.com].
An Active Manager operation failed. Error The database action failed. Error: Operation failed with message: MapiExceptionJetErrorMissingLogFile: Unable to mount database. (hr=0x80004005, ec=-528)
. [Database: MailboxDatabase02, Server: MAIL.aspirationscare.com]
An Active Manager operation failed. Error Operation failed with message: MapiExceptionJetErrorMissingLogFile: Unable to mount database. (hr=0x80004005, ec=-528)
. [Server: MAIL.aspirationscare.com]
MapiExceptionJetErrorMissingLogFile: Unable to mount database. (hr=0x80004005, ec=-528)
———————————————————
OK
———————————————————
Hi,
I am getting the following error when I try to kick off an offline defrag usuing eseutil
***************************************************************************************************
C:Program FilesExchsrvrbin>eseutil /d «C:Program FilesExchsrvrExchsrvrM
DATApriv1.edb» /t e:temp.edb
Microsoft(R) Exchange Server Database Utilities
Version 6.5
Copyright (C) Microsoft Corporation. All Rights Reserved.
Error: Access to source database ‘C:Program FilesExchsrvrExchsrvrMDBDATAp
v1.edb’ failed with Jet error -1811.
Operation terminated with error -1811 (JET_errFileNotFound, File not found) af
r 0.32 seconds.
****************************************************************************************************
the steps I have completed so far are:
1. Dismounted the Info Store
2. Connected an external hard drive to the server with enough space to run the defrag
3. I ran the defrag a couple of nights ago but had to stop the defrag as it took too long so I re-scheduled it for the weekend
4. It created two temp.edb and temp.stm files on the external hard drive — I deleted theses files today before I kicked of the defrag
5. When I kicked off the defrag I get the above error.
6. I have tried stopped all the exchange services and re-running the defrag but no joy
Any ideas?
Would this occur due to the fact I deleted the two temp.edb files from my initial running of the defrag where deleted?