Ошибка b0605 hp m1120 mfp

LaserJet 2055dn windows 10

I have a 32-bit hp computer 10 years on which I have installed Windows 10.  I can’t get my hp laserjet 2055dn printer to work with Windows 10. The printer appears in «Devices and printers» but the test page will not print nor nothing will print from MS Word. I can’t find a driver on any HP support site. Help, please.

http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=3662059&swLangOid=8&swEnvOid=4191

LaserJet 2055dn guard re — install (and fault) on Win7 32 bit

Hi there, we have a certain Laserjet 2055dn office configured to print via a USB connection to a docking of the user (and thus their laptops). They also 2055dn at home too, which they plug it into their laptop again via the USB port.

We recently migrated 3 users of XP to Win7 32-bit as a pilot and as such, we need get their impression also works.

On the first machine, I used the HP Universal Print Driver PCL6 (5.4.0) version on the HP site — everything went well until when we went from the printer and turn it back on again — he then tried to install the printer all over again and then failed. We then tried the P2050 (61.093.02.77) Series PCL6 driver from the main site and yet once again, everything looked ok until the user called to say when she went home and plugged his 2055 in, he again tried to re — install the printer and a not rather than using the print object existing only.

I checked and when the printed object is created, it’s going to USB001, and as I said, it’s all ok until you plug the printer back in?

If anyone has noticed this problem, or similar? I wonder if force us users to always use the same USB port on the laptop if it would help? I note that when the printer is found, it also seems to show an integrated HP Web server (or along those lines) print USB driver and try to find the drivers for it too much.

Any advice or suggestions is very welcomed,

Thanks for looking, Steve S.

Hi sansini,

It is a product of the profit margin. For the best answer to your questions, you need to transfer your question at the following links.

http://h30499.www3.HP.com/T5/business-support-forums/CT-p/business-support

http://h30499.www3.HP.com/T5/printers-LaserJet/BD-p/BSC-413

I use a HP Laserjet 2055DN on Windows 7. every time I print it gives me this blank page with t

I get the message printed as follows:
I use a HP Laserjet 2055DN on Windows 7.
How can I get rid of this?  Every time I print it gives me this blank page with the message /DevMgmt GET / DiscoveryTreeee.xml HTTP/1.1 Host: 127.0.0.1:8080
He just started to do in the last two days. I think that my software drivers have been updated automatically by HP.
Can you help?

Hello

This problem has been caused by the HP Universal print driver. Please remove the existing device P2055 printer & printers. Click Server properties, and then remove the driver tab HP Universal print driver.

Download the latest driver P2055 webste and install it.

Download the latest driver from the following Web site:

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesId=3662052&prodNameId=3662058&swEnvOID=4063&swLang=8&mode=2&taskId=135&swItem=lj-84320-1

LaserJet M1132 MFP: Error E3 on M1132 MFP

Hello

Please help, I get the error E3 despite the fact that I’ve changed the cartridge, made sure that all packages are cleaner, cleaned the iner part of paper, disconnected and reconnected several times.

is there a way to reset?

Thank you

I beg of you. Where E3 is an indication of a paper jam (could make sense given the noises your description), try the procedure described here: remove a paper jam for HP LaserJet Pro M1130 and LaserJet Pro M1210 Multifunction Printer Series.

If the problem persist, it would be better for you to call us.

LaserJet 3020 upgrade error

My Laserjet 3020 does not at all. A message is displayed on Didital sign indicating «UPGRADE ERROR, CALL HP HELP DESK».

Please advice how ractify it.

Alharamain wrote:

I don’t have. Since I do not know any number of support HP in Karachi centre.

Try this:
http://www.romakhi.com/

Computers of Roma was created in 1988 and 20 years computer Roma has itself in magnates Macho in World.Roma a computer is authorized dealer of Hewlett Packard (H.P.).

http://www.romakhi.com/contactus.html

LASERJET 1300: fatal error in laserjet 1300

I bought a ‘new’ in the Laserjet 1300 to a thrift store box when I turn it on it shows «ready» light, works, all gears seem to be turning, doing this for about 1 minute, then stops and shows fatal error, turn off and turn back on, same thing, any help?  error fatal high school talking about the engine, the engine turns during the minute before the error.

This is the engine error but it could be the motherboard, but all first I remove the cover and make sure that the Ribbon connector going to the laser/scanner Assembly is in place.  I know that the laser/scanner cable can give the defective engine error.  You will also want to check the other wire that goes to the laser/scanner Assembly to ensure that it is correctly connected at both ends.  It is also possible that the formatter is bad.

LaserJet MFP M127 Pro: LaserJet MFP M127 error message and don’t scan Pro

Relatively new LaserJet M127 gives me a «charging document» error message when you try to copy something that is clearly on the glass.  I tried to scan a document and it also gave me a message to load paper when I already had a loaded document.  It is fine impression of the MacBook, but will not copy.  He stopped abruptly.  I copied it several times before.  Any suggestions?

Thank YOU, rb011… it worked.

LaserJet P2055dn Setup error

When installing, I get the error message stating:

«This software cannot be installed using the command» run as… » ». The installation cannot continue until this is resolved. »

I am the only administrator of the computer and the only other account. I would like to set up the printer via a network connection. Thank you very much for the help.

WIV,

I don’t know what process the OS you use so I tried installing on a 64-bit win7. When I downloaded the software of complete solution by default it when right on a Setup screen where I can choose the easy installation or advance of Setup options. I chose the installation easy and let it run and install as usual. If you encounter another, could you explain further, and I will try to help you through it.

I have you linked to some documents that could be useful and a few screenshots that should help you through this. I also gave you the link to the page of the product that has the driver of the complete solution. You will want to choose the HP LaserJet P2050 post-Euro PCL6 Default Install.

2055 d Page product — choose this option: HP LaserJet P2050 post-Euro PCL6 Default Install

Install a driver full features or complete solution on a Windows 7 OS (32-bit and 64-bit) using a USB

Install a driver full features or the complete solution on a Windows 7 OS (32-bit and 64-bit) through a network

If you still need help, please post here and let me know what your specific problem.

Thank you.

When you try to install the HP Laserjet 1300 printer error there is a problem installing this hardware.

Original title: HP Laserjet 1300 Windows XP, SP3 error installation

When you try to install the HP Laserjet 1300 printer, I get the following error message and the process stops and restores.

CANNOT INSTALL THIS HARDWARE

There was a problem installing this hardware

HP Laserjet 1300 PCL 6

An error occurred during the installation of the device.

The specified Module could not be found.

I have used the original printer installation cd, bought a new cd from HP and downloaded the drivers directly from the HP Web site and I get the same error.  The record show error install printer on each attempt of events. Can anyone help?  Thank you

Hello

You are able to install other programs?

Method 1: See the following article:

http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02073861&LC=en&cc=us&product=3795406

Method 2: view the following steps and see if that helps.

(a) disconnect the printer

(b) uninstall the software and drivers on the computer

(c) plug the printer back

(d) allow the Hardware Wizard search for drivers

e) if it does not, it asks you to install the source for the drivers, the installation driver CD and install the drivers and see if that helps.

Color LASERJET CP1025nw — Fuser error

I get a ‘Fixer’ error when I print on my printer Laserjet CP1025nw.  I have powerd extinguish by instructions and left HP it goes off and unplugged during the minutes 25 + recommended, but nothing works.  There is a triangle with one! the control panel and I’m sure that has to go.

Any thoughts?

Thank you!!!

Steveoh

I found the solution on another forum HP.  The guy said to replace the black toner cartridge and it worked!  He said that it had removed all the toner cartridges and put them back in, but no luck.  Changing the black cartridge has worked for me and him!  My printer is less than a year and I have probably put 2 reams of paper through it, so I’m happy that it worked!

steveoh

Series HP laserjet 4050 N PCL5: laserjet «in an error state.

I don’t know if mine is a product of the company. I have not used the networking with him.

Recently, when I try to print a document, I get the message «error on HP LaserJet printing» or «printer is in an error state.» The printer prints a page of configuration but does not print any document or test page.

This started when I tried to print an email with something like a password (in fact my Akismet API key) and got the error message, «unable to print»Print»  (I had clicked on a hilighted (blue) ‘Print’ link.

Several jumpers did not work except for informing me that there may be a problem with my printer. «I tried to reset with the buttons on the printer: have reset the memory, restore factory settings and ‘reset’ I / 0 channels» (whatever that means).

A convenience store said that there is no problem with the drivers or the coils. I updated my driver and did a system restore to a time before the problem. After my «System Restore», I tried to uninstall and reinstall the printer. Nothing has worked.

Perhaps I should add that recently, I uninstalled and reinstalled my printer for a second time, and he presents himself as «copy 1».

The only thing I can think I can try easily changes the camera via my computer settings. The air settings either good or a little confused, but in theory, I could try at least temporarily by turning the «automatic configuration» to, etc. But I am a little doubtful it before some tips.

Any ideas? I miss my beloved, for a long time, already excellent printer.

If the printer is connected with a parallel cable to the printer to the computer, this is a known issue.  See the link below for the solution.

http://h30434.www3.HP.com/T5/LaserJet-printing/printer-in-error-status/m-p/5402232#M270467

LaserJet 4100N: Laserjet 4100N syntax error

Until yesterday my Laserjet 4100N was printing fine on my 64-bit Windows 8.1 office. Today, it prints a number of pages that are empty or with an error message like «Syntaxerror.»… The offending command:.  fl  (  … Operand Stack: 85 «or an empty string of similar meaning. Sometimes a part of requested printing come there, too, but often not.

I have tried rebooting the desktop computer and printer many times — no change.

I tried to uninstall the printer and reinstall via Windows — no change.

I tried to download and install the HP Universal print driver each available in three versions:

PostScript December 11, 2014 — no change

PCL 6 — Donna PCL XL Error

PCL 5 — does not print the document requested

Help, please!

Could be a fault of the driver, or intermittent corruption by the hardware, or (as explained in http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-Drivers/M175Nw-PCL-XL-errors/m-p/4940252 ) the result of a recent update for AVG anti-virus (which seems to have corrupted the output of different drivers, generating many XL PCL or PostScript errors or otherwise just to print (depends on the Language of Description of Page / driver is currently in use)).

LaserJet M1536 ToolboxFX error

HP LaserJet M1536dnf MFP C24F1A.  I have a new Dell inspiron N7110 computer Windows 7-64 bit.  Switch from a USB connection to a wired (Ethernet network connection).  Everything works including network, printing, scan etc, except that I can’t get my HP ToolboxFX to work.  I get an error message-

«HP ToolboxFX has encountered an error and can not recover»

«Restart the Toolbox tools or re — boot your PC, you will not be able to receive the alert message or use other features of ToolboxFX until it has been restarted.»

Windows version Win32NT — 6.1.7601.65536

HP ToolboxFX version 006.015.01163

I had this message until I changed my Ethernet connection but I would just restart and it works.  Nowi tried both restart the box tool and restart my PC and it does not work.  Any ideas? Is this a windows problem? Help, please.

Hi Maddie54,

Try follow it and see if it works for you.

• Please go to the following C:ProgramDataHewlett-PackardToolboxFXSettings directory
• In this directory, remove all files in the folder settings.
• Restart the pc and restart the printer.

* This can happen when the IP address has changed or the printer had lost communication and been re-connected.

color laserjet MFP M177: error message when you try to print

Hello

I have a HP Color laserjet MFP M177.  I can’t print I get an error message on my computer screen. No messeage shows up on the printer.  I have recently upgraded to windows 10 (I do not know what version) If this could have something to do with it?

Help, please

Thank you

Hi @Daisy001,

Welcome to the Forums of HP Support! I see by your post that you can’t print, since the upgrade to Windows 10. I will definitely do my best to help you. If this helps you to find a solution, please click on the button «Accept as Solution» down below in this message. If you want to say thanks for my effort to help, click on the ‘Thumbs Up’ to give me a Kudos.

If you have not completely uninstall and reinstall the driver, I would say to start it there first. Here is the link to the latest drivers: Color_LJPro_MFP_M177_full — solution_15188.exe

If the problem persists, you can download and run the print and Scan doctor, he will diagnose the problem and could solve it automatically.

Please let me know the results and if there is anything else I can help you. Thank you.