Содержание
- Как установить домашнюю бухгалтерияю на флешку?
- Как установить домашнюю бухгалтерияю на флешку?
- Re: Как установить домашнюю бухгалтерияю на флешку?
- Re: Как установить домашнюю бухгалтерияю на флешку?
- Re: Как установить домашнюю бухгалтерияю на флешку?
- Re: Как установить домашнюю бухгалтерияю на флешку?
- Re: Как установить домашнюю бухгалтерияю на флешку?
- Re: Как установить домашнюю бухгалтерияю на флешку?
- Re: Как установить домашнюю бухгалтерияю на флешку?
- Re: Как установить домашнюю бухгалтерияю на флешку?
- Re: Как установить домашнюю бухгалтерияю на флешку?
- Re: Как установить домашнюю бухгалтерияю на флешку?
- Re: Как установить домашнюю бухгалтерияю на флешку?
- Ошибка инициализации BDE
- Ошибка инициализации BDE
- Re: Ошибка инициализации BDE
- Re: Ошибка инициализации BDE
- Re: Ошибка инициализации BDE
- Re: Ошибка инициализации BDE
- Re: Ошибка инициализации BDE
- Re: Ошибка инициализации BDE
- Re: Ошибка инициализации BDE
- Re: Ошибка инициализации BDE
- Re: Ошибка инициализации BDE
- Re: Ошибка инициализации BDE
- Тема: Ошибка BDE
- Ошибка BDE
- Ошибка инициализации bde домашняя бухгалтерия windows 10
- Домашня бухгалтерія та BDE
Как установить домашнюю бухгалтерияю на флешку?
Как установить домашнюю бухгалтерияю на флешку?
Сообщение Tornad » 30 мар 2010, 16:55
Re: Как установить домашнюю бухгалтерияю на флешку?
Сообщение Keepsoft » 30 мар 2010, 18:24
1. Закройте Домашнюю бухгалтерию, если она у Вас открыта
2. Скачайте последнюю версию Домашней бухгалтерии 5: http://www.keepsoft.ru/files/homebuh/homebuh5.exe
3. Проинсталлируйте Домашнюю бухгалтерию 5 на флешку или на жесткий диск
Что касается ошибки DLL, то приведите пожалуйста дословно текст сообщения об ошибке, которую выдает программа и на каком этапе это происходит.
Re: Как установить домашнюю бухгалтерияю на флешку?
Сообщение VIGO » 20 май 2010, 12:35
Re: Как установить домашнюю бухгалтерияю на флешку?
Сообщение Keepsoft » 20 май 2010, 17:21
Re: Как установить домашнюю бухгалтерияю на флешку?
Сообщение VIGO » 20 май 2010, 20:58
Re: Как установить домашнюю бухгалтерияю на флешку?
Сообщение Keepsoft » 21 май 2010, 12:52
Re: Как установить домашнюю бухгалтерияю на флешку?
Сообщение VIGO » 24 май 2010, 15:34
Устраняю ошибку, запускается программа с тестовой БД Петров, Сидоров
Re: Как установить домашнюю бухгалтерияю на флешку?
Сообщение Keepsoft » 24 май 2010, 22:03
Устраняю ошибку, запускается программа с тестовой БД Петров, Сидоров
Re: Как установить домашнюю бухгалтерияю на флешку?
Сообщение VIGO » 25 май 2010, 07:39
Re: Как установить домашнюю бухгалтерияю на флешку?
Сообщение VIGO » 25 май 2010, 07:43
Re: Как установить домашнюю бухгалтерияю на флешку?
Сообщение Keepsoft » 25 май 2010, 09:01
Разумеется проблема именно в этом. Переносная лицензия предназначена для накопителей, подключаемых к компьютеру через USB и определяющихся в системе, как переносное устройство.
Чтобы Домашняя бухгалтерия работала с теми папками, которые Вам нужны, создайте в папке Домашней бухгалтерии на ZIV-носителе файл с именем homebuh5.ini со следующим содержанием:
[Paths]
BasePath=.Base
BackUpPath=.BackUp
BaseReportsPath=.BaseReports
BaseSDPath=.BaseSD
BaseTempPath=.BaseTemp
В этом случае Домашняя бухгалтерия будет брать данные из папок, расположенных в папке самой Домашней бухгалтерии (где лежит файл HomeBuh5.exe)
А что касается ошибки BDE, то скопируйте все файлы из папки %AllUsersProfile%%APPLICATIONDATA%KeepsoftBDE в папку Домашней бухгалтерии на ZIV-носителе
Re: Как установить домашнюю бухгалтерияю на флешку?
Сообщение VIGO » 25 май 2010, 12:31
Keepsoft писал(а): Разумеется проблема именно в этом. Переносная лицензия предназначена для накопителей, подключаемых к компьютеру через USB и определяющихся в системе, как переносное устройство.
Чтобы Домашняя бухгалтерия работала с теми папками, которые Вам нужны, создайте в папке Домашней бухгалтерии на ZIV-носителе файл с именем homebuh5.ini со следующим содержанием:
[Paths]
BasePath=.Base
BackUpPath=.BackUp
BaseReportsPath=.BaseReports
BaseSDPath=.BaseSD
BaseTempPath=.BaseTemp
В этом случае Домашняя бухгалтерия будет брать данные из папок, расположенных в папке самой Домашней бухгалтерии (где лежит файл HomeBuh5.exe)
А что касается ошибки BDE, то скопируйте все файлы из папки %AllUsersProfile%%APPLICATIONDATA%KeepsoftBDE в папку Домашней бухгалтерии на ZIV-носителе
Источник
Ошибка инициализации BDE
Сообщение Xelavir » 10 авг 2016, 10:40
Re: Ошибка инициализации BDE
Сообщение Keepsoft » 11 авг 2016, 11:34
Re: Ошибка инициализации BDE
Сообщение Xelavir » 11 авг 2016, 11:40
Re: Ошибка инициализации BDE
Сообщение Keepsoft » 11 авг 2016, 13:27
Re: Ошибка инициализации BDE
Сообщение Xelavir » 16 авг 2016, 10:23
Re: Ошибка инициализации BDE
Сообщение Keepsoft » 17 авг 2016, 00:15
Re: Ошибка инициализации BDE
Сообщение Xelavir » 17 авг 2016, 18:31
Re: Ошибка инициализации BDE
Сообщение Keepsoft » 17 авг 2016, 23:25
Re: Ошибка инициализации BDE
Сообщение alan » 10 дек 2016, 22:57
Аналогичная проблема с переносной версией Домашней бухгалтерии 6.
Установил программу на флешку. На том компьютере, где была установлена стандартная версия на диск С (Windows XP) программа с флешки запускается без проблем, но на другом компьютере выдает сообщение «Ошибка инициализации BDE» (Windows 7).
Поэтому хочется понять, каким образом можно устранить данную ошибку и начать пользоваться переносной версией? Ведь специально переходил на переносную версию, чтобы не быть привязанным к старому компьютеру.
Re: Ошибка инициализации BDE
Сообщение Keepsoft » 11 дек 2016, 23:03
alan писал(а): Аналогичная проблема с переносной версией Домашней бухгалтерии 6.
Установил программу на флешку. На том компьютере, где была установлена стандартная версия на диск С (Windows XP) программа с флешки запускается без проблем, но на другом компьютере выдает сообщение «Ошибка инициализации BDE» (Windows 7).
Поэтому хочется понять, каким образом можно устранить данную ошибку и начать пользоваться переносной версией? Ведь специально переходил на переносную версию, чтобы не быть привязанным к старому компьютеру.
Re: Ошибка инициализации BDE
Сообщение Vadym » 17 май 2017, 15:33
Источник
Тема: Ошибка BDE
Опции темы
Отображение
Ошибка BDE
Win 7 Prof 32 бит. Сначала время от времени, теперь каждый раз, если запущен выделенный сервер, при запуске редактора (или отчетов) выдается ошибка:
An eror occured while attemping to initialize the BDE (error S210D).
Поначалу проблема решалась переустановкой BDE. Теперь дошаманился, даже переустановка не помогает
Если остановить сервер, редактор запускается. Если запустить сначала редактор, то сервер не запускается.
Win 7 Prof 32 бит. Сначала время от времени, теперь каждый раз, если запущен выделенный сервер, при запуске редактора (или отчетов) выдается ошибка:
An eror occured while attemping to initialize the BDE (error S210D).
Поначалу проблема решалась переустановкой BDE. Теперь дошаманился, даже переустановка не помогает
Если остановить сервер, редактор запускается. Если запустить сначала редактор, то сервер не запускается.
З.Ы. все ярлыки запускаются от имени администратора
У некоторых такая фигня еще на XP проявлялась. Но о решении проблемы никто не хвастался.
Решение нашёл в параметрах конфигурации BDE
ConfigurationSYSTEMINIT
параметр SHAREDMEMLOCATION
NT 2000 Ru
значение увеличивал с 1000 с шагом 1000 на 3000 ошибка исчезла»
Решать проблему надо, ибо случается
Вот еще инфа. Только источники информации недоступны что-то у меня.
Insufficient memory for this operation ($2501)
Ошибка: ваша программа (или другая программа, использующая BDE) исчерпала всю память доступную BDE.
Решение:
1) Закройте все программы использующие BDE.
2) Найдите программу BDEADMIN.EXE. Обычно она располагается в «Program FilesBorland. «.
3) Запустите BDEADMIN.EXE и перейдите на закладку Configuration.
4) В дереве должен быть элемент «Configuration». Если он не раскрыт, то раскройте его.
5) Затем раскройте элемент «System». В нем выберите «INIT».
6) На правой панели найдите элемент «SHAREDMEMSIZE». Поменяйте его значение на 4096.
7) Затем в главном меню нажмите «Object» и «Apply».
Нажмите «OK» на вопрос «Save all edits. «.
После этого попробуйте запустить программу снова. Если проблема повторяется, то измените значение SHAREDMEMSIZE на 4096 и SHAREDMEMLOCATION на 5BDE. После изменения значений запустите еще раз вашу программу. Если и после этого она не запускается, то поменяйте SHAREDMEMSIZE на 8192. Если ошибка повторяется, то поменяйте SHAREDMEMLOCATION на 6BDE. Если ничего не получилось, то попробуйте другие значения SHAREDMEMLOCATION, следуя нижеследующим инструкциям.
Shared memory conflict ($210D)
Ошибка: BDE пытается использовать область в памяти, которая уже используется операционной системой или другой программой.
Решение:
1) Закройте все программы использующие BDE.
2) Найдите программу BDEADMIN.EXE. Обычно она располагается в «Program FilesBorland. «.
3) Запустите BDEADMIN.EXE и перейдите на закладку Configuration.
4) В дереве должен быть элемент «Configuration». Если он не раскрыт, то раскройте его.
5) Затем раскройте элемент «System». В нем выберите «INIT».
6) На правой панели найдите элемент «SHAREDMEMLOCATION». Поменяйте его значение на 5BDE.
7) Затем в главном меню нажмите «Object» и «Apply».
Нажмите «OK» на вопрос «Save all edits. «.
Другие возможные значения: 1000, 7000, 7F00. Если ни одно из указанных значений не устраняет проблему, то попробуйте 2000, 3000, 4000 и т.д. или другие значения в зависимости от типа операционной системы:
Windows 95/98: SHAREDMEMLOCATION от 9000 до FFFF
Windows NT/2000: SHAREDMEMLOCATION от 1000 до 7F00.
Insufficient shared memory available ($251E)
Ошибка: вашей программе недостаточно памяти для BDE.
Решение:
Попробуйте решения из описанных выше случаев.
Источник
Ошибка инициализации bde домашняя бухгалтерия windows 10
← →
Pat ( 2003-01-17 14:23 ) [1]
Попробуй не ставить BDE, а кидать нужные dll»ки в папку с EXE»шником..может что-нить где-нить не прописывается.
← →
gsu ( 2003-01-17 17:34 ) [2]
1. ошибка в программе
2. глюки bde
← →
VAleksey ( 2003-01-18 13:17 ) [3]
← →
Наталия ( 2003-01-20 06:06 ) [4]
VAleksey © (17.01.03 13:06)
Было у меня один раз такое. Несколько в иной интерпретации. После установки БДЕ программа около двух лет работала без проблем. Однажды, после запуска антивируса, при попытке запуска программы появилась такая ошибка, как ты описал. Переустановила БДЕ, всё заработало. С чем это связано, пока не понятно.
Pat © (17.01.03 14:23)
Твой совет ни в какие ворота не лезет.
Источник
Домашня бухгалтерія та BDE
Насколько я помню, они используют БД формата Paradox.
Я бы сохранил отдельно базу данных. Потом установил новую программу, и попытался перезаписать БД поверху существующей (или попытался переключить программу на существующую БД, если такая функция есть). Не получится, тогда дальше думать.
ЗЫ. Вообще, имеет смысл обдумать переход на альтернативы, потому как использование BDE в 2016 году свидетельствует о серьезных проблемах в мозгах разработчика.
alt402 13.06.2016 21:23 пишет:
ЗЫ. Вообще, имеет смысл обдумать переход на альтернативы, потому как использование BDE в 2016 году свидетельствует о серьезных проблемах в мозгах разработчика.
программа написана в 1998 году
тогда BDE это было актуально
боюсь, что программа не столько хороша, чтобы разработчики инвестировали в переписывание на актуальной платформе.
если шо, до сих пор, сам сопровождаю программу написаною мной на Delphi 6, с тем же BDE в 1998-1999 годах
Изменено hollywood (21:38 13/06/2016)
ВОт это все в ТОЧНОСТИ выполнил.
важно именно точно!
Изменено hollywood (21:41 13/06/2016)
алтернативное радикальное решение:
VirtualBox + WindowsXP SP3 + Твоя программа
hollywood 13.06.2016 21:43 пишет:
алтернативное радикальное решение:
VirtualBox + WindowsXP SP3 + Твоя программа
Зачем такие костыли, если прога нормально работает на всех виндах, вплоть до 10-ки? Это у ТС какая-то локальная проблема.
hollywood 13.06.2016 21:37 пишет:
ВОт это все в ТОЧНОСТИ выполнил.
важно именно точно!
1. Убедитесь, что Ваша учетная запись Windows имеет права администратора
точно
чиста вінда після переустановки, один юзер
Изменено S.T.A.L.K.E.R (21:54 13/06/2016)
hollywood 13.06.2016 21:37 пишет:
ВОт это все в ТОЧНОСТИ выполнил.
важно именно точно!
В ответ на:
6. После успешной инсталляции BDE, найдите на Вашем компьютере и запустите файл bdeadmin.exe (обычно этот файл находится в папке C:ProgramDataKeepsoftBDE)
hollywood 13.06.2016 21:37 пишет:
ВОт это все в ТОЧНОСТИ выполнил.
важно именно точно!
В ответ на:
6. После успешной инсталляции BDE, найдите на Вашем компьютере и запустите файл bdeadmin.exe (обычно этот файл находится в папке C:ProgramDataKeepsoftBDE)
Ну хорошо, а где твои файлы с данными лежат? BDE то на месте, а данные к нему есть?
Изменено Maks_on_Escort (22:22 13/06/2016)
Источник
← →
navichok
(2007-11-21 20:34)
[0]
СУБД InterBase через некоторое время работы программы выходит BDE error $000F что делать?
← →
Johnmen ©
(2007-11-21 20:41)
[1]
первая же ссылка
http://www.yandex.ru/yandsearch?text=BDE+error+%24000F
← →
navichok
(2007-11-21 20:54)
[2]
Я это уже читал и сделал как написано, не помогло поэтому задал вопрос!
← →
Kolan ©
(2007-11-21 21:02)
[3]
Самый простой и надежный метод не использовать BDE.
← →
megabyte ©
(2007-11-22 10:08)
[4]
Для IB есть же стандартные компоненты в Дельфях IBX!
← →
Desdechado ©
(2007-11-22 11:05)
[5]
Ошибка BDE 000F обычно сигнализирует о том, что для менеджеру памяти не хватило этой самой памяти для выделения под буфер (при получении записей от сервера), хотя могут быть и иные причины.
Query.Unidirectional:=True
Или не читать километровые таблицы в память, доработав логику программы до нормальной.
Written by quinn on Thursday, 30 September 1999 Posted in DATA
Question:. I’m getting BDE Error 000F. What does this mean?
Answer: BDE Error 000F usually indicates that the buffer
manager ran out of memory, though there may be other causes for this
error. Increasing the BDE SHAREDMEMSIZE parameter in BDE Admin may
solve the problem, or just delay the error from occuring.
Tags:
Delphi
C++Builder
Database
Database Engines
Support guy since 3/18/85. It was dBASE II/III back then.
Check out more tips and tricks in this development video:
No iframes
Greg Rowland
unread,
Apr 1, 2002, 7:18:05 PM4/1/02
to
Any ideas on what error BDE $000F is?
Delphi 6 Update Pack #2
InfoPower 3000.05
Windows 2000 Pro-Client
Windows 2000 Advanced Server
Microsoft SQL Server 2000 Enterprise addition
Thanx in advance,
Greg
Tomek Pinkiewicz
unread,
Apr 4, 2002, 6:43:45 AM4/4/02
to
I’ve tried increasing SHAREDMEMSIZE to 65000 (Kbytes I think), but it
doesn’t do anything.
What’s the reason for this error? And how can it be fixed?
I hope someone can help me
Thank.
Tom
«Greg Rowland» <sup…@JobTrax.com> wrote in message
news:3ca87a40$1_1@dnews…
Tomek Pinkiewicz
unread,
Apr 4, 2002, 7:14:26 AM4/4/02
to
Normally when I create TTable or TStoredProcedure that retrieves a dataset,
I set the Active property to true. So, when the form loads up tables and
stored procedures are initialized and program crashed ($000F error) before
the form can be loaded.
Well, I’ve set Active property to false for all the tables and SPs.
Then I put code in the form constructor that sets Active property to true
for all tables and SPs. And it worked! At least for now. From previous
experience I know that $000F error seems to appear out of nowhere. But for
the moment I seemed to have fixed this problem.
«Greg Rowland» <sup…@JobTrax.com> wrote in message
news:3ca87a40$1_1@dnews…
Tomek Pinkiewicz
unread,
Apr 4, 2002, 9:24:25 AM4/4/02
to
I’ve been using BCB fora couple of hours and the error re-appeared again!
Damn! I guess the solution I gave is incorrect.
Sorry.
«Tomek Pinkiewicz» <tom…@hotmail.com> wrote in message
news:3cabc527_2@dnews…
Greg Rowland
unread,
Apr 4, 2002, 7:05:42 PM4/4/02
to
Gee Tomek,
I guess nobody is touching this one!
OK here’s what we’re do’n.
Downloaded and installed BDE 5.2.0.2 «with some reservation»
http://ibinstall.defined.net/dl_bdeinfo.htm from
http://bdesupport.com
Make sure that all «idapi32.cfg» alias’s are complete and accurate. The BDE
install blew «idapi32.cfg» away on some workstations.
Our app uses ODBC to access SQL 2000 and BDE Alias’s to access some Paradox
temp tables.
It seems the Paradox «idapi32.cfg» entries may have something to do with
error $000F.
After installing BDE 5.2.0.2 we started getting ACCESS VIOLATIONs from the
SQL connection(s) on some workstations.
After considerable hair tearing/testing it was determined that systems with
the MDAC which installs with Office 2000 did not exibit the
ACCESS VIOLATION, so we have been updating the MDAC on all our workstations
in addition to the BDE.
So far our production application «Delphi 4.0 Interbase 4.0» and some
«Delphi 5.0 also IB 4 Modules» have not been affected by these update(s),
although my knees are still knocking.
All this is in preparation for roll-out of an all «Delphi 6.0 SQL 2000»
version of our proprietary «Mission Crital Application» http://JobTrax.com
tm.
Really wish we had a more definative answer to error $000F, however these
«PATCHES» seem to be holding! I have developed my own definative which I
will share with you privately.
Unless something else breaks we have another week of BETA testing before the
new release.
Will keep you posted,
Good Luck,
G
Greg Rowland
unread,
Apr 4, 2002, 7:07:49 PM4/4/02
to
Greg Rowland
unread,
Apr 12, 2002, 5:29:43 PM4/12/02
to
Hello All,
This problem definitely seems memory related.
I am developing on a P2 700Mhz with 265Meg
Anyone know of guidelines for; Min, Max Stack & Base Memory Size?
Wonder if this could have some effect in this error, Bumped up the installed
default(s), albeit arbitrarily.
Not sure about Tomek’s project, ours is huge, the exec is approaching 6meg.
I’ve a feeling that manipulating SHAREDMEMLOCATION and or SHAREDMEMSIZE as
suggested here may be of some use.
Thanx,
Greg Rowland
Tomek Pinkiewicz
unread,
Apr 16, 2002, 3:36:13 AM4/16/02
to
I agree that this is memory related. It’s not so much about the size of the
memory but it’s about not releasing that memory back to the system (from BDE
or the App or number of other apps?) it seems.
Increasing SHAREDMEMSIZE (or other values) will only delay the problem.
For me it only happens with Stored Procedures (using MS SQL2K).
This is what I’ve done to prevent the error from happening. I put this line
in the constructor of the main form:
database_name->CloseDataSets();
This a function of the database component TDatabase
I also have KeepConnection property set to FALSE. Even if this doesn’t stop
the error it helps me to recover from it better (before I had to restar the
computer).
I’m using C++ Builder 5 Update Pack 1. My project is smaller than Greg’s but
relies heavily on Stored Procedures and I’m also using triggers for my
tables.
Tom.
«Greg Rowland» <sup…@jobtrax.com> wrote in message
news:3cb6e1a0$1_2@dnews…
Greg Rowland
unread,
Apr 19, 2002, 12:03:35 AM4/19/02
to
-
#1
I know it’s a long shot but does anyone out there use the BDE engine in a programming capacity and hit the good old «BDE Error 000F» issue.
I looked it up and set SHAREDMEMSIZE to max along with all the other init params. Seems I still get it when loading certain records in a SQL qry object.
Figure someone may have run into this before.
Thanks,
-
#2
I havent really used the database that much to be honest, I looked into the error and it states ‘the buffer manager run out of memory’.
what is your SQL query calling? how many records do you query? Perhaps you could try normalising your database to help it run more efficiently?
Sorry, if what I have said, is no use
-
#3
lol, I love this answer I found on the Delphi32 site faq regarding your error
«In general, when this error occurs you must do less of something to make the error not occur. «
-
#4
But I did find this:-
A possible cause of the infamous $000F error can also be the presence of (too) many MEMO (Blob) fields in the result set. I had this one using SQL 6.5 and BDE 5.1. Increasing blobs to cache, memory size for the BDE etc … did not help. The matter was complicated because the effect of the error showed up in another non related task (which returned no records on a normal simple query-not embedded in a try ..except) whilst the actual origin of the error was in a running task. Altering the start sequence of both tasks made the error disappear for a while. Removing the Blobs from the select list in the query and moving them to a separate query in an ‘OnAfterScroll’ cured the problem.
-
#5
IT_GEEK said:
But I did find this:-
A possible cause of the infamous $000F error can also be the presence of (too) many MEMO (Blob) fields in the result set. I had this one using SQL 6.5 and BDE 5.1. Increasing blobs to cache, memory size for the BDE etc … did not help. The matter was complicated because the effect of the error showed up in another non related task (which returned no records on a normal simple query-not embedded in a try ..except) whilst the actual origin of the error was in a running task. Altering the start sequence of both tasks made the error disappear for a while. Removing the Blobs from the select list in the query and moving them to a separate query in an ‘OnAfterScroll’ cured the problem.
That may be a winner!!!
I realized I had 2 memo data fields tied to the data element. It was around 490 records. Not really a lot.
It’s basically making a sql call to an AS-400 with parameterized date and time, looping through returned records and inserting into an access db.
Im not sure what you meant by the onafterscroll event. I mean I do, but are you saying that you had a control of some sort causing the issue or was it the dataset itself? I use mainly Borland Builder 6 C++ and 2006 and I use TMS for custom controls. So
Also, I have built a little sql tool much like MS SQL query analyzer and ran the query through that with no errors, which was really getting me loopy.
I need to select on the blob fields but I guess I could query them separately as two fields (blob, PKey) and then the rest of the fields.
Do you think if I just remove all bound controls and read from the query object I should be ok? In your opinion?
«In general, when this error occurs you must do less of something to make the error not occur. »
That’s the same error description we were laughing at/cursing over here
-
#6
I found the solution on Google, so the «onafterscroll» comment is not mine, but as you say, it sounds like the person had it bound to a control, a listbox or combobox seems most likely
-
#7
Sorry, just read the rest of your post. As I say, I googled the answer. I have never used Delphi or C++. But as a general comment the error would seem to be within the Borland engine. Just out of intrest the tool you bullt was that built using the Borland C++ package? With regard to removing the bound controls, its tricky to say without seeing the interface. Whenever I have used bound controls it has been to make the interface work slicker and better for the user, so I would be reluctant to remove that functionality because of a Borland error. If you can work around it somehow as you say by querying the memo fileds seperately and can then combine your results into the control, so the user doesnt even notice you have changed the code, to me that would be a better solution
-
#8
IT_GEEK said:
Sorry, just read the rest of your post. As I say, I googled the answer. I have never used Delphi or C++. But as a general comment the error would seem to be within the Borland engine. Just out of intrest the tool you bullt was that built using the Borland C++ package? With regard to removing the bound controls, its tricky to say without seeing the interface. Whenever I have used bound controls it has been to make the interface work slicker and better for the user, so I would be reluctant to remove that functionality because of a Borland error. If you can work around it somehow as you say by querying the memo fileds seperately and can then combine your results into the control, so the user doesnt even notice you have changed the code, to me that would be a better solution
In a nutshell:
It’s an app that monitors a IBM as400 file/table that stores integration errors. The errors are wiped by the system after 3 days and provide no notification
I’m writing something that scans that file via sql and stores the results permanently in another database. It will also pro actively email or text notify a distro list when errors are present.
The way the connection works is that a general connection is created and bound to a BDE database component via ODBC. Then either query or table objects are bound to the database object, then a data source is bound to the table or query, then lastly your componant(s) are bound to the data source.
You can poll the data components directly or through the components via datasource. The datasource more cotrols the traffic and connection rules ie: Read only, Select, delete, insert, update, et al.
Anyway, the error was occurring when I opened a query component and activated it. I think that because there were 2 memo fields bound in via the method above it was causing the error. I plan on just polling the query object directly.
We’ll see how it works out.
Thanks for your help.