Ошибка is not a valid date

This article applies to Microsoft Dynamics NAV for all countries and all language locales.

Symptoms

In the RoleTailored Client (RTC) of Microsoft Dynamics NAV 2009, if the Regional Setting is set to «Hungarian», when you enter a Date on a page, you receive the following error message:

‘YYYY.MM.DD.’ is not a valid date.

This problem occurs in the following products:

  • Microsoft Dynamics NAV 2009 Service Pack 1 (SP1)

  • Microsoft Dynamics NAV 2009 R2

Resolution

Hotfix information

A supported hotfix is available from Microsoft. There is a «Hotfix download available» section at the top of this Knowledge Base article. If you are encountering an issue downloading, installing this hotfix, or have other technical support questions, contact your partner or, if enrolled in a support plan directly with Microsoft, you can contact technical support for Microsoft Dynamics and create a new support request. To do this, visit the following Microsoft Web site:

https://mbs.microsoft.com/support/newstart.aspx You can also contact technical support for Microsoft Dynamics by phone using these links for country specific phone numbers. To do this, visit one of the following Microsoft Web sites:

Partners

https://mbs.microsoft.com/partnersource/resources/support/supportinformation/Global+Support+ContactsCustomers

How to obtain the Microsoft Dynamics NAV hotfix or update files

After you request a Microsoft Dynamics NAV hotfix, a hyperlink will be sent to you in an e-mail.

The e-mail will contain a hyperlink and a password. You can use the hyperlink to download the Microsoft Dynamics NAV hotfix or the update files. When you click the hyperlink, the File Download – Security Warning dialog box opens. Then, you are prompted to run, to save, or to cancel the download.

If you click Run, the files start the download and the extraction process. You must specify a folder for the new files, and then provide the password.

If you click Save, you must specify a path for saving the compressed file. When you open the file that you saved, you are prompted to specify a path for the files. Then, you must provide the password provided in the e-mail.

If you click Cancel, the download process stops.

How to install a Microsoft Dynamics NAV hotfix or an update file

The Microsoft Dynamics NAV platform hotfixes and updates are made available as single files. To install a Microsoft Dynamics NAV hotfix or an update, you must replace the existing Microsoft Dynamics NAV installation files with the hotfix or the update files. To do this, follow these steps.

Step 1: Replace the files in the Microsoft Dynamics NAV Classic Client installation

In the Microsoft Dynamics NAV Classic Client installation, replace the following files by using the hotfix or the update file.

File name

File version

File size

Date

Time

Platform

Dbm.dll

6.0.32259.0

312,648

15-Mar-2011

19:42

x86

Fin.exe

6.0.32259.0

12,593,480

15-Mar-2011

19:29

x86

Finhlink.exe

6.0.32259.0

452,432

15-Mar-2011

19:42

x86

Finsql.exe

6.0.32259.0

12,724,560

15-Mar-2011

19:29

x86

Microsoft.dynamics.nav.dotnetbridge.dll

6.0.32259.0

207,752

15-Mar-2011

19:29

x86

Microsoft.dynamics.nav.transformation.reporting.dll

6.0.32259.0

114,592

15-Mar-2011

19:29

x86

Nc_netb.dll

6.0.32259.0

16,720

15-Mar-2011

19:42

x86

Nc_tcp.dll

6.0.32259.0

18,768

15-Mar-2011

19:42

x86

Nc_tcps.dll

6.0.32259.0

25,424

15-Mar-2011

19:42

x86

Ndbcs.dll

6.0.32259.0

1,168,720

15-Mar-2011

19:42

x86

Slave.exe

6.0.32259.0

38,224

15-Mar-2011

19:42

x86

To replace the existing Microsoft Dynamics NAV files, follow these steps:

  1. Close the Microsoft Dynamics NAV Classic Client.

  2. Locate the Microsoft Dynamics NAV Classic Client installation directory. The Microsoft Dynamics NAV Classic Client is usually installed in the following directory:

    C:Program FilesMicrosoft Dynamics NAV60Classic

  3. Copy the files that you downloaded.

  4. Paste the files that you downloaded into the Microsoft Dynamics NAV Classic Client installation directory.

  5. Click Yes to overwrite the files in the directory.

Step 2: Replace the files in the Microsoft Dynamics NAV RoleTailored client installation

In the Microsoft Dynamics NAV RoleTailored client installation, replace the following files by using the hotfix or the update file.

File name

File version

File size

Date

Time

Platform

Microsoft.dynamics.framework.patterns.dll

1.3.10803.496

71,656

14-Mar-2011

07:30

x86

Microsoft.dynamics.framework.ui.dll

1.3.10803.496

702,424

14-Mar-2011

07:30

x86

Microsoft.dynamics.framework.ui.mapping.dll

1.3.10803.496

104,424

14-Mar-2011

07:30

x86

Microsoft.dynamics.framework.ui.navigation.dll

1.3.10803.496

34,800

14-Mar-2011

07:30

x86

Microsoft.dynamics.framework.ui.ux2006.dll

1.3.10803.496

92,136

14-Mar-2011

07:30

x86

Microsoft.dynamics.framework.ui.ux2006.winforms.dll

1.3.10803.496

63,480

14-Mar-2011

07:30

x86

Microsoft.dynamics.framework.ui.windows.dll

1.3.10803.496

83,944

14-Mar-2011

07:30

x86

Microsoft.dynamics.framework.ui.winforms.controls.dll

1.3.10803.496

2,222,080

14-Mar-2011

07:30

x86

Microsoft.dynamics.framework.ui.winforms.dll

1.3.10803.496

1,091,568

14-Mar-2011

07:30

x86

Microsoft.dynamics.nav.client.builder.dll

6.0.32259.0

206,736

15-Mar-2011

19:28

x86

Microsoft.dynamics.nav.client.exe

6.0.32259.0

149,376

15-Mar-2011

19:28

x86

Microsoft.dynamics.nav.client.interop.communicator.dll

1.0.559.183

75,688

15-Mar-2011

19:28

x86

Microsoft.dynamics.nav.client.serviceconnection.dll

6.0.32259.0

112,544

15-Mar-2011

19:28

x86

Microsoft.dynamics.nav.client.ui.dll

6.0.32259.0

530,304

15-Mar-2011

19:28

x86

Microsoft.dynamics.nav.client.winforms.dll

6.0.32259.0

350,096

15-Mar-2011

19:28

x86

Microsoft.dynamics.nav.client.winforms.tlb

Not Applicable

2,680

15-Mar-2011

13:50

Not Applicable

Microsoft.dynamics.nav.language.dll

6.0.32259.0

2,021,248

15-Mar-2011

19:28

x86

Microsoft.dynamics.nav.types.dll

6.0.32259.0

591,736

15-Mar-2011

19:28

x86

Microsoft.dynamics.nav.watson.dll

6.0.32259.0

42,880

15-Mar-2011

19:28

x86

Microsoft.office.interop.outlook.dll

10.0.4504.0

395,136

15-Mar-2011

19:42

x86


To replace these files, follow these steps:

  1. Close the Microsoft Dynamics NAV RoleTailored client.

  2. Locate the Microsoft Dynamics NAV RoleTailored client installation directory. The Microsoft Dynamics NAV RoleTailored client is usually installed in the following directory:

    C:Program FilesMicrosoft Dynamics NAV60RoleTailored Client

  3. Copy the files that you downloaded.

  4. Paste the files that you downloaded into the Microsoft Dynamics NAV RoleTailored client installation directory.

  5. Click Yes to overwrite the files in the directory.

Step 3: Replace the files in the Microsoft Dynamics NAV Server installation

In the Microsoft Dynamics NAV Server installation, replace the following files by using the hotfix or the update file.

File name

File version

File size

Date

Time

Platform

Httpcfg.exe

5.2.3790.0

22,352

15-Mar-2011

19:43

x86

Microsoft.dynamics.nav.language.dll

6.0.32259.0

2,021,248

15-Mar-2011

19:29

x86

Microsoft.dynamics.nav.ncl.dll

6.0.32259.0

628,600

15-Mar-2011

19:29

x86

Microsoft.dynamics.nav.server.exe

6.0.32259.0

141,184

15-Mar-2011

19:29

x86

Microsoft.dynamics.nav.service.dll

6.0.32259.0

145,280

15-Mar-2011

19:29

x86

Microsoft.dynamics.nav.service.runtime.dll

6.0.32259.0

75,664

15-Mar-2011

19:29

x86

Microsoft.dynamics.nav.service.webservices.dll

6.0.32259.0

149,400

15-Mar-2011

19:29

x86

Microsoft.dynamics.nav.types.dll

6.0.32259.0

591,736

15-Mar-2011

19:29

x86

Microsoft.dynamics.nav.watson.dll

6.0.32259.0

42,880

15-Mar-2011

19:29

x86

Nclcsrt.etx

Not applicable

90,329

15-Mar-2011

09:39

Not applicable

Nclcsrt.stx

Not applicable

92,128

15-Mar-2011

09:39

Not applicable

Nclcsrts.dll

6.0.32259.0

1,444,176

15-Mar-2011

19:42

x86

Ndbcs.dll

6.0.32259.0

1,168,720

15-Mar-2011

19:42

x86


To replace these files, follow these steps:

  1. Stop the Microsoft Dynamics NAV Server.

  2. Locate the Microsoft Dynamics NAV Server installation directory. The Microsoft Dynamics NAV Server is usually installed in the following directory:

    C:Program FilesMicrosoft Dynamics NAV60Service

  3. Copy the files that you downloaded.

  4. Paste the files that you downloaded into the Microsoft Dynamics NAV Server installation directory.

  5. Click Yes to overwrite the files in the directory.

  6. Start the Microsoft Dynamics NAV Server.

Step 4: Replace the files in the Microsoft Dynamics NAV Application Server installation

If you have Microsoft Dynamics NAV Application Server installed, replace the following files in the Microsoft Dynamics NAV Application Server installation by using the hotfix or the update files.

File name

File version

File size

Date

Time

Platform

Dbm.dll

6.0.32259.0

312,648

15-Mar-2011

19:42

x86

Nas.exe

6.0.32259.0

2,188,616

15-Mar-2011

19:29

x86

Nassql.exe

6.0.32259.0

2,293,072

15-Mar-2011

19:29

x86

Ndbcs.dll

6.0.32259.0

1,168,720

15-Mar-2011

19:42

x86

Slave.exe

6.0.32259.0

38,224

15-Mar-2011

19:42

x86

To replace the files, follow these steps.

  1. Stop the Microsoft Dynamics NAV Application Server.

  2. Locate the Microsoft Dynamics NAV Application Server installation directory. The Microsoft Dynamics NAV Application Server is usually installed in the following directory:

    C:Program FilesMicrosoft Dynamics NAV60Application Server

  3. Copy the files that you downloaded.

  4. Paste the files that you downloaded into the Microsoft Dynamics NAV Application Server installation directory.

  5. Click Yes to overwrite the files in the directory.

  6. Start the Microsoft Dynamics NAV Application Server.

Step 5: Replace the files in the Microsoft Dynamics NAV SDK installation

If you have Microsoft Dynamics NAV SDK installed, replace the following files.

File name

File version

File size

Date

Time

Platform

Cf.h

Not applicable

57,950

15-Mar-2011

13:50

Not applicable

Cfront.dll

6.0.32259.0

1,418,576

15-Mar-2011

19:42

x86

Cfront.ocx

6.0.32259.0

112,464

15-Mar-2011

19:42

x86

Cfrontsql.dll

6.0.32259.0

1,631,576

15-Mar-2011

19:42

x86

Libload.c

Not applicable

31,718

15-Mar-2011

07:50

Not applicable

Microsoft.dynamics.nav.cfront.cfrontdotnet.dll

6.0.32259.0

182,168

15-Mar-2011

19:29

x86

Microsoft.dynamics.nav.cfront.cfrontdotnet.xml

Not applicable

443,045

15-Mar-2011

08:13

Not applicable

Sample.c

Not applicable

28,718

15-Mar-2011

07:50

Not applicable

Sample.exe

6.0.32259.0

32,592

15-Mar-2011

19:42

x86

To replace the files, follow these steps.

  1. Locate the Microsoft Dynamics NAV SDK installation directories. The Microsoft Dynamics NAV SDK is usually installed in the following directories:

    C:Program FilesMicrosoft Dynamics NAV60SDKCFRONT

    C:Program FilesMicrosoft Dynamics NAV60SDKCommunication Components

    C:Program FilesCommon FilesMicrosoft Dynamics NAVCommunication Component

  2. Choose the SDK to update, either C/Front or Communication Components.

  3. Copy the files that you downloaded.

  4. Paste the files that you downloaded into the appropriate Microsoft Dynamics NAV SDK installation directory.

  5. Click Yes to overwrite the files in the directory.

Note If you downloaded a hotfix or an update for the communication components, you must register the .dll files individually.

Step 6: Replace the files in the Microsoft Dynamics NAV ODBC driver installation

If you have the Microsoft Dynamics NAV ODBC driver installed, replace the following files in the Microsoft Dynamics NAV ODBC driver installation.

File name

File version

File size

Date

Time

Platform

Cfront.dll

6.0.32259.0

1,418,576

15-Mar-2011

19:42

x86

Dbm.dll

6.0.32259.0

312,648

15-Mar-2011

19:42

x86

Nc_netb.dll

6.0.32259.0

16,720

15-Mar-2011

19:43

x86

Nc_tcp.dll

6.0.32259.0

18,768

15-Mar-2011

19:42

x86

Nc_tcps.dll

6.0.32259.0

25,424

15-Mar-2011

19:43

x86

Nodbc.dll

6.0.32259.0

2,141,520

15-Mar-2011

19:42

x86

Nodbc.xml

Not applicable

1,209

25-Aug-2009

16:43

Not applicable

Nodbccfg.cfg

6.0.32259.0

724,992

15-Mar-2011

09:10

Not applicable

Nodbccfg.xml

Not applicable

2,538

09-Mar-2011

06:30

Not applicable

Slave.exe

6.0.32259.0

38,224

15-Mar-2011

19:42

x86

To replace the files, follow these steps.

  1. Locate the Microsoft Dynamics NAV ODBC driver installation directory. The Microsoft Dynamics NAV ODBC driver is usually installed in the following directory:

    C:Program FilesMicrosoft Dynamics NAV60ODBC

  2. Copy the files that you downloaded.

  3. Paste the files that you downloaded into the Microsoft Dynamics NAV ODBC driver installation directory.

  4. Click Yes to overwrite the files in the directory.

Prerequisites

You must have one of the following products installed to apply this hotfix:

  • Microsoft Dynamics NAV 2009 Service Pack 1 (SP1)

  • Microsoft Dynamics NAV 2009 R2

Status

Microsoft has confirmed that this is a bug in the Microsoft products that are listed in the «Applies to» section.

More Information

For more information, click the following article number to view the article in the Microsoft Knowledge Base:

824684 Description of the standard terminology that is used to describe Microsoft software updates

Note This is a «FAST PUBLISH» article created directly from within the Microsoft support organization. The information contained herein is provided as-is in response to emerging issues. As a result of the speed in making it available, the materials may include typographical errors and may be revised at any time without notice. See Terms of Use for other considerations.

Источник

This article applies to Microsoft Dynamics NAV for all countries and all language locales.

Symptoms

In the RoleTailored Client (RTC) of Microsoft Dynamics NAV 2009, if the Regional Setting is set to «Hungarian», when you enter a Date on a page, you receive the following error message:

‘YYYY.MM.DD.’ is not a valid date.

This problem occurs in the following products:

  • Microsoft Dynamics NAV 2009 Service Pack 1 (SP1)

  • Microsoft Dynamics NAV 2009 R2

Resolution

Hotfix information

A supported hotfix is available from Microsoft. There is a «Hotfix download available» section at the top of this Knowledge Base article. If you are encountering an issue downloading, installing this hotfix, or have other technical support questions, contact your partner or, if enrolled in a support plan directly with Microsoft, you can contact technical support for Microsoft Dynamics and create a new support request. To do this, visit the following Microsoft Web site:

https://mbs.microsoft.com/support/newstart.aspx You can also contact technical support for Microsoft Dynamics by phone using these links for country specific phone numbers. To do this, visit one of the following Microsoft Web sites:

Partners

https://mbs.microsoft.com/partnersource/resources/support/supportinformation/Global+Support+ContactsCustomers

How to obtain the Microsoft Dynamics NAV hotfix or update files

After you request a Microsoft Dynamics NAV hotfix, a hyperlink will be sent to you in an e-mail.

The e-mail will contain a hyperlink and a password. You can use the hyperlink to download the Microsoft Dynamics NAV hotfix or the update files. When you click the hyperlink, the File Download – Security Warning dialog box opens. Then, you are prompted to run, to save, or to cancel the download.

If you click Run, the files start the download and the extraction process. You must specify a folder for the new files, and then provide the password.

If you click Save, you must specify a path for saving the compressed file. When you open the file that you saved, you are prompted to specify a path for the files. Then, you must provide the password provided in the e-mail.

If you click Cancel, the download process stops.

How to install a Microsoft Dynamics NAV hotfix or an update file

The Microsoft Dynamics NAV platform hotfixes and updates are made available as single files. To install a Microsoft Dynamics NAV hotfix or an update, you must replace the existing Microsoft Dynamics NAV installation files with the hotfix or the update files. To do this, follow these steps.

Step 1: Replace the files in the Microsoft Dynamics NAV Classic Client installation

In the Microsoft Dynamics NAV Classic Client installation, replace the following files by using the hotfix or the update file.

File name

File version

File size

Date

Time

Platform

Dbm.dll

6.0.32259.0

312,648

15-Mar-2011

19:42

x86

Fin.exe

6.0.32259.0

12,593,480

15-Mar-2011

19:29

x86

Finhlink.exe

6.0.32259.0

452,432

15-Mar-2011

19:42

x86

Finsql.exe

6.0.32259.0

12,724,560

15-Mar-2011

19:29

x86

Microsoft.dynamics.nav.dotnetbridge.dll

6.0.32259.0

207,752

15-Mar-2011

19:29

x86

Microsoft.dynamics.nav.transformation.reporting.dll

6.0.32259.0

114,592

15-Mar-2011

19:29

x86

Nc_netb.dll

6.0.32259.0

16,720

15-Mar-2011

19:42

x86

Nc_tcp.dll

6.0.32259.0

18,768

15-Mar-2011

19:42

x86

Nc_tcps.dll

6.0.32259.0

25,424

15-Mar-2011

19:42

x86

Ndbcs.dll

6.0.32259.0

1,168,720

15-Mar-2011

19:42

x86

Slave.exe

6.0.32259.0

38,224

15-Mar-2011

19:42

x86

To replace the existing Microsoft Dynamics NAV files, follow these steps:

  1. Close the Microsoft Dynamics NAV Classic Client.

  2. Locate the Microsoft Dynamics NAV Classic Client installation directory. The Microsoft Dynamics NAV Classic Client is usually installed in the following directory:

    C:Program FilesMicrosoft Dynamics NAV60Classic

  3. Copy the files that you downloaded.

  4. Paste the files that you downloaded into the Microsoft Dynamics NAV Classic Client installation directory.

  5. Click Yes to overwrite the files in the directory.

Step 2: Replace the files in the Microsoft Dynamics NAV RoleTailored client installation

In the Microsoft Dynamics NAV RoleTailored client installation, replace the following files by using the hotfix or the update file.

File name

File version

File size

Date

Time

Platform

Microsoft.dynamics.framework.patterns.dll

1.3.10803.496

71,656

14-Mar-2011

07:30

x86

Microsoft.dynamics.framework.ui.dll

1.3.10803.496

702,424

14-Mar-2011

07:30

x86

Microsoft.dynamics.framework.ui.mapping.dll

1.3.10803.496

104,424

14-Mar-2011

07:30

x86

Microsoft.dynamics.framework.ui.navigation.dll

1.3.10803.496

34,800

14-Mar-2011

07:30

x86

Microsoft.dynamics.framework.ui.ux2006.dll

1.3.10803.496

92,136

14-Mar-2011

07:30

x86

Microsoft.dynamics.framework.ui.ux2006.winforms.dll

1.3.10803.496

63,480

14-Mar-2011

07:30

x86

Microsoft.dynamics.framework.ui.windows.dll

1.3.10803.496

83,944

14-Mar-2011

07:30

x86

Microsoft.dynamics.framework.ui.winforms.controls.dll

1.3.10803.496

2,222,080

14-Mar-2011

07:30

x86

Microsoft.dynamics.framework.ui.winforms.dll

1.3.10803.496

1,091,568

14-Mar-2011

07:30

x86

Microsoft.dynamics.nav.client.builder.dll

6.0.32259.0

206,736

15-Mar-2011

19:28

x86

Microsoft.dynamics.nav.client.exe

6.0.32259.0

149,376

15-Mar-2011

19:28

x86

Microsoft.dynamics.nav.client.interop.communicator.dll

1.0.559.183

75,688

15-Mar-2011

19:28

x86

Microsoft.dynamics.nav.client.serviceconnection.dll

6.0.32259.0

112,544

15-Mar-2011

19:28

x86

Microsoft.dynamics.nav.client.ui.dll

6.0.32259.0

530,304

15-Mar-2011

19:28

x86

Microsoft.dynamics.nav.client.winforms.dll

6.0.32259.0

350,096

15-Mar-2011

19:28

x86

Microsoft.dynamics.nav.client.winforms.tlb

Not Applicable

2,680

15-Mar-2011

13:50

Not Applicable

Microsoft.dynamics.nav.language.dll

6.0.32259.0

2,021,248

15-Mar-2011

19:28

x86

Microsoft.dynamics.nav.types.dll

6.0.32259.0

591,736

15-Mar-2011

19:28

x86

Microsoft.dynamics.nav.watson.dll

6.0.32259.0

42,880

15-Mar-2011

19:28

x86

Microsoft.office.interop.outlook.dll

10.0.4504.0

395,136

15-Mar-2011

19:42

x86


To replace these files, follow these steps:

  1. Close the Microsoft Dynamics NAV RoleTailored client.

  2. Locate the Microsoft Dynamics NAV RoleTailored client installation directory. The Microsoft Dynamics NAV RoleTailored client is usually installed in the following directory:

    C:Program FilesMicrosoft Dynamics NAV60RoleTailored Client

  3. Copy the files that you downloaded.

  4. Paste the files that you downloaded into the Microsoft Dynamics NAV RoleTailored client installation directory.

  5. Click Yes to overwrite the files in the directory.

Step 3: Replace the files in the Microsoft Dynamics NAV Server installation

In the Microsoft Dynamics NAV Server installation, replace the following files by using the hotfix or the update file.

File name

File version

File size

Date

Time

Platform

Httpcfg.exe

5.2.3790.0

22,352

15-Mar-2011

19:43

x86

Microsoft.dynamics.nav.language.dll

6.0.32259.0

2,021,248

15-Mar-2011

19:29

x86

Microsoft.dynamics.nav.ncl.dll

6.0.32259.0

628,600

15-Mar-2011

19:29

x86

Microsoft.dynamics.nav.server.exe

6.0.32259.0

141,184

15-Mar-2011

19:29

x86

Microsoft.dynamics.nav.service.dll

6.0.32259.0

145,280

15-Mar-2011

19:29

x86

Microsoft.dynamics.nav.service.runtime.dll

6.0.32259.0

75,664

15-Mar-2011

19:29

x86

Microsoft.dynamics.nav.service.webservices.dll

6.0.32259.0

149,400

15-Mar-2011

19:29

x86

Microsoft.dynamics.nav.types.dll

6.0.32259.0

591,736

15-Mar-2011

19:29

x86

Microsoft.dynamics.nav.watson.dll

6.0.32259.0

42,880

15-Mar-2011

19:29

x86

Nclcsrt.etx

Not applicable

90,329

15-Mar-2011

09:39

Not applicable

Nclcsrt.stx

Not applicable

92,128

15-Mar-2011

09:39

Not applicable

Nclcsrts.dll

6.0.32259.0

1,444,176

15-Mar-2011

19:42

x86

Ndbcs.dll

6.0.32259.0

1,168,720

15-Mar-2011

19:42

x86


To replace these files, follow these steps:

  1. Stop the Microsoft Dynamics NAV Server.

  2. Locate the Microsoft Dynamics NAV Server installation directory. The Microsoft Dynamics NAV Server is usually installed in the following directory:

    C:Program FilesMicrosoft Dynamics NAV60Service

  3. Copy the files that you downloaded.

  4. Paste the files that you downloaded into the Microsoft Dynamics NAV Server installation directory.

  5. Click Yes to overwrite the files in the directory.

  6. Start the Microsoft Dynamics NAV Server.

Step 4: Replace the files in the Microsoft Dynamics NAV Application Server installation

If you have Microsoft Dynamics NAV Application Server installed, replace the following files in the Microsoft Dynamics NAV Application Server installation by using the hotfix or the update files.

File name

File version

File size

Date

Time

Platform

Dbm.dll

6.0.32259.0

312,648

15-Mar-2011

19:42

x86

Nas.exe

6.0.32259.0

2,188,616

15-Mar-2011

19:29

x86

Nassql.exe

6.0.32259.0

2,293,072

15-Mar-2011

19:29

x86

Ndbcs.dll

6.0.32259.0

1,168,720

15-Mar-2011

19:42

x86

Slave.exe

6.0.32259.0

38,224

15-Mar-2011

19:42

x86

To replace the files, follow these steps.

  1. Stop the Microsoft Dynamics NAV Application Server.

  2. Locate the Microsoft Dynamics NAV Application Server installation directory. The Microsoft Dynamics NAV Application Server is usually installed in the following directory:

    C:Program FilesMicrosoft Dynamics NAV60Application Server

  3. Copy the files that you downloaded.

  4. Paste the files that you downloaded into the Microsoft Dynamics NAV Application Server installation directory.

  5. Click Yes to overwrite the files in the directory.

  6. Start the Microsoft Dynamics NAV Application Server.

Step 5: Replace the files in the Microsoft Dynamics NAV SDK installation

If you have Microsoft Dynamics NAV SDK installed, replace the following files.

File name

File version

File size

Date

Time

Platform

Cf.h

Not applicable

57,950

15-Mar-2011

13:50

Not applicable

Cfront.dll

6.0.32259.0

1,418,576

15-Mar-2011

19:42

x86

Cfront.ocx

6.0.32259.0

112,464

15-Mar-2011

19:42

x86

Cfrontsql.dll

6.0.32259.0

1,631,576

15-Mar-2011

19:42

x86

Libload.c

Not applicable

31,718

15-Mar-2011

07:50

Not applicable

Microsoft.dynamics.nav.cfront.cfrontdotnet.dll

6.0.32259.0

182,168

15-Mar-2011

19:29

x86

Microsoft.dynamics.nav.cfront.cfrontdotnet.xml

Not applicable

443,045

15-Mar-2011

08:13

Not applicable

Sample.c

Not applicable

28,718

15-Mar-2011

07:50

Not applicable

Sample.exe

6.0.32259.0

32,592

15-Mar-2011

19:42

x86

To replace the files, follow these steps.

  1. Locate the Microsoft Dynamics NAV SDK installation directories. The Microsoft Dynamics NAV SDK is usually installed in the following directories:

    C:Program FilesMicrosoft Dynamics NAV60SDKCFRONT

    C:Program FilesMicrosoft Dynamics NAV60SDKCommunication Components

    C:Program FilesCommon FilesMicrosoft Dynamics NAVCommunication Component

  2. Choose the SDK to update, either C/Front or Communication Components.

  3. Copy the files that you downloaded.

  4. Paste the files that you downloaded into the appropriate Microsoft Dynamics NAV SDK installation directory.

  5. Click Yes to overwrite the files in the directory.

Note If you downloaded a hotfix or an update for the communication components, you must register the .dll files individually.

Step 6: Replace the files in the Microsoft Dynamics NAV ODBC driver installation

If you have the Microsoft Dynamics NAV ODBC driver installed, replace the following files in the Microsoft Dynamics NAV ODBC driver installation.

File name

File version

File size

Date

Time

Platform

Cfront.dll

6.0.32259.0

1,418,576

15-Mar-2011

19:42

x86

Dbm.dll

6.0.32259.0

312,648

15-Mar-2011

19:42

x86

Nc_netb.dll

6.0.32259.0

16,720

15-Mar-2011

19:43

x86

Nc_tcp.dll

6.0.32259.0

18,768

15-Mar-2011

19:42

x86

Nc_tcps.dll

6.0.32259.0

25,424

15-Mar-2011

19:43

x86

Nodbc.dll

6.0.32259.0

2,141,520

15-Mar-2011

19:42

x86

Nodbc.xml

Not applicable

1,209

25-Aug-2009

16:43

Not applicable

Nodbccfg.cfg

6.0.32259.0

724,992

15-Mar-2011

09:10

Not applicable

Nodbccfg.xml

Not applicable

2,538

09-Mar-2011

06:30

Not applicable

Slave.exe

6.0.32259.0

38,224

15-Mar-2011

19:42

x86

To replace the files, follow these steps.

  1. Locate the Microsoft Dynamics NAV ODBC driver installation directory. The Microsoft Dynamics NAV ODBC driver is usually installed in the following directory:

    C:Program FilesMicrosoft Dynamics NAV60ODBC

  2. Copy the files that you downloaded.

  3. Paste the files that you downloaded into the Microsoft Dynamics NAV ODBC driver installation directory.

  4. Click Yes to overwrite the files in the directory.

Prerequisites

You must have one of the following products installed to apply this hotfix:

  • Microsoft Dynamics NAV 2009 Service Pack 1 (SP1)

  • Microsoft Dynamics NAV 2009 R2

Status

Microsoft has confirmed that this is a bug in the Microsoft products that are listed in the «Applies to» section.

More Information

For more information, click the following article number to view the article in the Microsoft Knowledge Base:

824684 Description of the standard terminology that is used to describe Microsoft software updates

Note This is a «FAST PUBLISH» article created directly from within the Microsoft support organization. The information contained herein is provided as-is in response to emerging issues. As a result of the speed in making it available, the materials may include typographical errors and may be revised at any time without notice. See Terms of Use for other considerations.

Источник

radio-july

0 / 0 / 0

Регистрация: 06.06.2016

Сообщений: 21

1

03.06.2019, 12:15. Показов 7044. Ответов 8

Метки нет (Все метки)

Студворк — интернет-сервис помощи студентам

MySQlexpress=>adoconection=>ADOQuery

Delphi 
1
2
3
4
5
6
7
8
9
10

procedure TForm8.ADOQuery_kontrolostatokGetText(Sender: TField;
  var Text: string; DisplayText: Boolean);
  var
   dataos: integer;
   data_zav: Tdate;
begin
data_zav:=strtodate(form8.ADOQuery_kontrolsrok_boss.Value);
dataos:=DaysBetween(Now, data_zav);
text:=inttostr(dataos);
End;

При компиляции приложение. выдает ощипку 2019-06-05 is not a valid date. Как я привольно понял в столбце mysql формат даты YYYY-MM-DD а мне что бы провезти математические расчеты перевезти его на DD-MM-YYYY. Подскажите как мне в этом процедуре преобразовать с YYYY-MM-DD на DD-MM-YYYY. Заранее благодарю.



0

D1973

Модератор

8507 / 5664 / 2293

Регистрация: 21.01.2014

Сообщений: 24,321

Записей в блоге: 3

03.06.2019, 12:31

2

Лучший ответ Сообщение было отмечено radio-july как решение

Решение

Цитата
Сообщение от radio-july
Посмотреть сообщение

преобразовать с YYYY-MM-DD на DD-MM-YYYY.

Delphi 
1
2
3
4
5

var FS: TFormatSettings;
...
FS.ShortDateFormat := 'yyyy-mm-dd';
FS.DateSeparator := '-';
data_zav := StrToDate(form8.ADOQuery_kontrolsrok_boss.Value, FS);



1

5158 / 4111 / 1031

Регистрация: 29.08.2013

Сообщений: 26,093

Записей в блоге: 3

03.06.2019, 12:31

3

Цитата
Сообщение от radio-july
Посмотреть сообщение

Подскажите как

1. Написать функцию в Mysql (или что там у них) что бы она на выходе давала нужный формат
2. в делфи изменить
2.1 как с текстом — взять 4 символа оттуда, положить туда и тд
2.2 как с датой — например функцией DecodeDate()



1

0 / 0 / 0

Регистрация: 06.06.2016

Сообщений: 21

04.06.2019, 08:16

 [ТС]

4

Спасибо работает. Но вышло еще одна ощипка. При создание новой строки в ADOQuery командой Insert столбец ostatok- colculed выдает ощипку что столбце srok_boss значение не может пустым (‘ ‘ is not a valid date) и останавливает работу программы и не могу не чего поделать. Сможете помочь



0

5158 / 4111 / 1031

Регистрация: 29.08.2013

Сообщений: 26,093

Записей в блоге: 3

04.06.2019, 08:22

5

как? телепатически угадать что у вас там написано?

показывайте код
у вас точно пустых дат в базе нет?



0

Модератор

8507 / 5664 / 2293

Регистрация: 21.01.2014

Сообщений: 24,321

Записей в блоге: 3

04.06.2019, 08:55

6

Эта «ощипка» устраняется очень просто: вам просто необходимо в нужное поле записать нужную дату. А где, что и как Вы пишите — кроме Вас самих не знает никто…



0

radio-july

0 / 0 / 0

Регистрация: 06.06.2016

Сообщений: 21

04.06.2019, 09:30

 [ТС]

7
Delphi 
1
2
3
4
5
6
7
8
9
10
11
12
13

procedure TForm8.ADOQuery_kontrolostatokGetText(Sender: TField;
  var Text: string; DisplayText: Boolean);
  var
dataos: integer;
data_zav: Tdate;
FS: TFormatSettings;
begin
FS.ShortDateFormat := 'yyyy-mm-dd';
FS.DateSeparator := '-';
data_zav := StrToDate(form8.ADOQuery_kontrolsrok_boss.Value, FS);
dataos:=DaysBetween(Now, data_zav);
text:=inttostr(dataos);
End;

****

Delphi 
1
2
3
4
5
6

procedure TForm8.Button2Click(Sender: TObject);
begin
form8.ADOQuery_kontrol.Insert;
form8.ADOQuery_kontrol.FieldByName('srok_boss').AsDateTime:='2019-06.10';
form8.PageControl_os.ActivePageIndex:=1;
end;

Пустая дата появляться при выполнение

Delphi 
1

form8.ADOQuery_kontrol.insert;

выдает «ошибка» ‘ ‘ is not a valid date и выполнение программы останавливается. Так как я умею только добавлять значение в поле только после

Delphi 
1

form8.ADOQuery_kontrol.insert;

команда

Delphi 
1

form8.ADOQuery_kontrol.FieldByName('srok_boss').AsDateTime:='2019-06.10';

после ошибки не выполняется



0

Модератор

8507 / 5664 / 2293

Регистрация: 21.01.2014

Сообщений: 24,321

Записей в блоге: 3

04.06.2019, 09:42

8

Лучший ответ Сообщение было отмечено radio-july как решение

Решение

Цитата
Сообщение от radio-july
Посмотреть сообщение

‘2019-06.10’

Вот это никак не является корректным значением даты…

Цитата
Сообщение от radio-july
Посмотреть сообщение

form8.ADOQuery_kontrol.insert;

Не скрещивайте ежа и ужа! Если работаете с компонентом Query — то и делайте все нормально, SQL-запросами. Не надо сюда приплетать методы, предназначенные для Table…



1

0 / 0 / 0

Регистрация: 06.06.2016

Сообщений: 21

04.06.2019, 09:49

 [ТС]

9

Спасибо попробую SQL запросами.



0

IT_Exp

Эксперт

87844 / 49110 / 22898

Регистрация: 17.06.2006

Сообщений: 92,604

 04.06.2019, 09:49

9

Источник

In my code I am facing a problem. Example code:

var 
    d1: tdatetime
begin
    d1 := strtodatetime('23/02/2011 12:34:56');
end;

but it’s giving the error:

’23/02/2011 12:34:56′ is not valid
date and time

What’s wrong with what I am doing?

Donal Fellows's user avatar

Donal Fellows

132k18 gold badges148 silver badges214 bronze badges

asked Jul 25, 2010 at 19:26

steve0's user avatar

2

the StrToDateTime function uses the ShortDateFormat and DateSeparator to convert the date part and the LongTimeFormat and TimeSeparator to the time part. so you string must match with theses variables to convert the string to TDateTime. instead you can use the StrToDateTime with the TFormatSettings parameter, to parse you string.

 function StrToDateTime(const S: string; const FormatSettings: TFormatSettings): TDateTime;

check this sample

Var
StrDate : string;
Fmt     : TFormatSettings;
dt      : TDateTime;
begin
fmt.ShortDateFormat:='dd/mm/yyyy';
fmt.DateSeparator  :='/';
fmt.LongTimeFormat :='hh:nn:ss';
fmt.TimeSeparator  :=':';
StrDate:='23/02/2011 12:34:56';
dt:=StrToDateTime(StrDate,Fmt);

answered Jul 25, 2010 at 19:43

RRUZ's user avatar

RRUZRRUZ

135k20 gold badges356 silver badges483 bronze badges

2

Using VarToDateTime might be a lot simpler and it just works out of the box:

uses Variants;

newDateTime := VarToDateTime('23/02/2011 12:34:56');

answered Jul 11, 2015 at 10:48

Kromster's user avatar

KromsterKromster

7,1517 gold badges62 silver badges110 bronze badges

1

This is caused by the date/time format in your code not matching the date/time format for your locale settings.

From the docs (D2009):

The S parameter must use the current
locale’s date/time format. In the US,
this is commonly MM/DD/YY HH:MM:SS
format. Specifying AM or PM as part of
the time is optional, as are the
seconds. Use 24-hour time (7:45 PM is
entered as 19:45, for example) if AM
or PM is not specified.

If you are using an older Delphi, StrToDateTime may require a specific format. From the docs (D5 in this case):

The S parameter must be in the
MM/DD/YY HH:MM:SS format. Specifying
AM or PM as part of the time is
optional, as are the seconds. Use
24-hour time (7:45 PM is entered as
19:45, for example) if AM or PM is not
specified.

answered Jul 25, 2010 at 19:30

Marjan Venema's user avatar

Marjan VenemaMarjan Venema

19.1k6 gold badges65 silver badges79 bronze badges

Источник

djnut2

Новичок
Сообщения: 3
Зарегистрирован: 19 сен 2008, 07:00

Ошибка — Its not valid date !

Может я чего то неправильно делаю , но у меня при создании расписания вылетает ошибка (Дата) Its not valid date !,
потом уже сама карточка ролика так начинает отвечать и закрывает всю программу.

Вот подробности :

Код: Выделить всё

ERROR: '12.10.2008' is not a valid date
TYPE: EConvertError
CALL STACK:
loadsaveads.pas => ParseCardTimes => 943
loadsaveads.pas => ParseCardFiles => 888
loadsaveads.pas => LoadCard => 991
loadsaveads.pas => TryLoadCard => 976
card_unit.pas => Modify_Card => 211
adsman_unit.pas => TAdsMan.GetCurrentCardPointer => 2518
adsman_unit.pas => TAdsMan.EditButClick => 2074
adspro.dpr => Initialization => 108
FILE: AdsPro.exe 1.4.4.1
WINDOWS: 5.1.2600 Service Pack 2

LOG: C:Program FilesRADIO Studio ProRADIO AdsMan ProAdsPro-error.log

Аватара пользователя

RadioSoft

Администрация сайта
Сообщения: 1636
Зарегистрирован: 20 мар 2003, 16:33
Откуда: Россия, Омск
Контактная информация:

Re: Ошибка — Its not valid date !

Сообщение

RadioSoft » 13 окт 2008, 03:08

Посмотрите настройки системных разделителей для даты (Пуск — Панель управления — Язык и региональные стандарты).
В вашем случае дата должна иметь вид dd.mm.yyyy (дд.мм.гггг)
Возможно вы их поменяли, либо принесли ролики с другого компьютера, где другие разделители даты.

Источник

  • Ошибка irp фильтра unknown irp windows 7
  • Ошибка iron not less or equal windows 10
  • Ошибка irlq not less or equal
  • Ошибка iptables no chain target match by that name
  • Ошибка ipm модуля intelligent power module