Home › Repetier-Host › Windows
Connection Problems — No start signal detected — forcing start
I am trying to connect my printer to the host and am having connection issues.
The baud rate in the firmware and RH is set to 115200. I have tried the baud rate in device manager at 9600 and 115200 with no difference between them. Just to be sure I tried every other baud rate to no avail.
I am on PC running Windows 7 but the same problems were observed on my mac.
Any advice would be appreciated please
Проблема заключается в том что принтер не получает сигналы от компа. Программа только сообщает ‘ожидание команды 1’
ТО ЧТО ОПИСЫВАЛОСЬ ТУТ http://3dtoday.ru/questions/printer-ne-reagiruet-na-repetier-host/
мне конкретно не помогло.
Принтер Принтер Prusa i3 из китая
вот что выдает программа после подключение принтера
16:16:59.747 : No start signal detected — forcing start
16:16:59.748 : N1 M110*34
16:16:59.748 : N2 M115*36
16:16:59.748 : N3 M105*36
16:16:59.748 : N4 M114*35
16:16:59.787 : N5 M111 S6*98
16:16:59.790 : N6 T0*60
16:16:59.790 : N7 M20*22
16:16:59.791 : N8 M80*19
16:16:59.791 : N9 M105*46
16:17:02.805 : N10 M105*22
16:17:42.880 : Communication timeout — reset send buffer block
16:17:42.880 : N11 M105*23
16:17:45.611 : N12 M105*20
16:17:48.673 : N13 M105*21
16:17:51.730 : N14 M105*18
16:17:54.784 : N15 M105*19
16:17:57.841 : N16 M105*16
16:18:00.904 : N17 M105*17
16:18:03.958 : N18 M105*30
16:18:07.015 : N19 M105*31
16:18:47.089 : Communication timeout — reset send buffer block
16:18:47.089 : N20 M105*21
16:18:49.821 : N21 M105*20
16:18:52.883 : N22 M105*23
16:18:55.940 : N23 M105*22
16:18:58.994 : N24 M105*17
16:19:02.056 : N25 M105*16
16:19:05.113 : N26 M105*19
16:19:08.168 : N27 M105*18
16:19:11.226 : N28 M105*29
16:19:51.299 : Communication timeout — reset send buffer block
16:19:51.299 : N29 M105*28
16:19:54.031 : N30 M105*20
16:19:57.092 : N31 M105*21
16:20:00.150 : N32 M105*22
16:20:03.206 : N33 M105*23
16:20:06.261 : N34 M105*16
16:20:09.324 : N35 M105*17
16:20:12.378 : N36 M105*18
16:20:15.435 : N37 M105*19
16:20:55.512 : Communication timeout — reset send buffer block
16:20:55.512 : N38 M105*28
16:20:58.243 : N39 M105*29
16:21:01.298 : N40 M105*19
16:21:04.355 : N41 M105*18
16:21:07.416 : N42 M105*17
16:21:10.473 : N43 M105*16
16:21:13.529 : N44 M105*23
16:21:16.589 : N45 M105*22
16:21:19.646 : N46 M105*21
Loading
Hi,
I’ve changed the controller of my CNC from Ramps to SKR 1.4. I had several problems while compiling but I luckily I could solve them on my own. Unfortunately now I’m stuck. I use Repetier to controll the CNC from my PC and connected the USB cable as usual. When hitting connect, Repetier says connected but the controlls aren’t really working. When I hit the X+10mm button, first nothing happens, but after a very long time the CNC suddenly does the move it’s supposed to. This waiting time can be anything from 10s to what seems like forever. That’s the same behavior for entering my own gcodes like M122 for checking if UART is working.
Repetier says «No start signal detected — forcing start» and every now and then it says «Communication timeout — reset send buffer block».
When using the LCD menu, everything is working perfectly. So I guess the problem has to come from the USB communication.
When I first started the board, the LCD said «Err: EEPROM version». I solved that by hitting Restore Defaults, then Store Settings and then Load Settings. Now the Error is permanently gone, but could this be a hint on what’s wrong?
I already tested connecting to my Mac using Repetier: Same thing…
I hope anyone has an idea for what settings are wrong in my config or what other problem it could be. Attatched is a .zip containing my config.
Thanks Max
Attachments:
open | download —
Archiv.zip
(66.9 KB)
-
hooked
- Posts: 17
- Joined: Fri Dec 11, 2015 7:41 am
HELP REQUIRED
Hi,
I had to replace the computer that was connected to my G2 printer. I have installed Repetier Host on the new computer but can’t get the printer working.
Repetier host does connect but I get the following message. «No Start Signal detected — forcing start»
Do I have to reload the printer firmware. I’m assuming it is still resident on the printer EEPROM.
Any suggestions would be greatly appreciated.
THANKS
Daryl
-
hooked
- Posts: 17
- Joined: Fri Dec 11, 2015 7:41 am
Re: HELP REQUIRED
Post
by hooked » Tue Jun 21, 2016 5:18 pm
Disregard my post. I found the problem. I had not installed the fdi driver.
Cheers
Daryl
-
William
- Site Admin
- Posts: 6340
- Joined: Tue Jun 07, 2016 9:38 am
Re: HELP REQUIRED
Post
by William » Tue Jun 21, 2016 5:46 pm
hooked wrote:Disregard my post. I found the problem. I had not installed the fdi driver.
Cheers
Daryl
-Keep your mind and try to test it. 
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!