|
|
#1 |
|
Human being with feelings Join Date: Apr 2009 Posts: 12 |
I am set up with PRo Tools, however buffering problems have forced me to use Audacity (can’t find my mbox) and then to Reaper. Reaper was working well until I got this warning: There was an error while opening your audio hardware. Error initializing Asio Driver. When I go to preferences>audio>device I can see that the Asio Driver is there, but there is no audio enable input or output to choose from. Please help. I was so close to completeing a freelance project and now cannot edit my tracks or do anything. |
|
|
|
|
#2 |
|
Human being with feelings Join Date: Jul 2006 Location: Cowtown Posts: 1,562 |
Shut down your machine, power EVERYTHING off, then bring it back up. The hardware has likely momentarily spazzed out and needs to be reset. Worth a try, anyway. Scott |
|
|
|
|
|
#3 |
|
Human being with feelings Join Date: Apr 2009 Posts: 12 |
I tried shutting it down and reloading the Asio Drivers. Still no luck. |
|
|
|
|
|
#4 |
|
Human being with feelings
Join Date: Sep 2008 Location: Location Posts: 5,553 |
Hi Bronto and welcome to the forums. It may also be possible that you have another program running that uses the ASIO-driver. It can only be used by one program at a time. -Data |
|
|
|
|
|
#5 |
|
Human being with feelings Join Date: Apr 2009 Posts: 12 |
Thank you for your replies. Any thoughts of what programs would be using the asio drivers? As far as I can tell I have everything else turned off. I just don’t get it. It was there. I recorded. And then I unplugged my mbox to go edit on the couch. Then that window popped up. The mbox is now plugged in and the computer has been restarted numerous times. Is my computer just not able to handle these programs?
Last edited by Bronto; 04-05-2009 at 09:14 AM.
|
|
|
|
|
|
#6 |
|
Human being with feelings
Join Date: Oct 2008 Location: Germany Posts: 1,772 |
I had a similar problem once and couldn’t resolve it. HTH Michael |
|
|
|
|
|
#7 |
|
Human being with feelings
Join Date: Sep 2008 Location: Location Posts: 5,553 |
You mentioned Audacity. It could be any program that deals with sound. even when playing audio- or video-files streamed from the internet could be the culprit. For the time being, just use the WDM-drivers. You can mix and edit with them as well. You don’t have the low latencies though, but if you don’t have to play any instruments or sort of you can do so. This at least takes the time-pressure and you can deal with the ASIO-problem later. -Data |
|
|
|
|
|
#8 |
|
Human being with feelings Join Date: Apr 2009 Posts: 12 |
[QUOTE=MichaJo;303263]I had a similar problem once and couldn’t resolve it. Thanks. But you’ll have to forgive me, what’s an ini-file? Should I uninstall/install and relaunch Reaper? I saved the recorded audio in a folder on my desktop. Will they be safe there or will they be deleted if I uninstall Reaper? This so frustrating. I’ve spent hour on the phone with sweetwater.com and like I said, gone from pro tools, to audacity, to Reaper and there always seems to be someting wrong. |
|
|
|
|
|
#9 |
|
Human being with feelings Join Date: Apr 2009 Posts: 12 |
Quote:
Originally Posted by Mr. Data You mentioned Audacity. It could be any program that deals with sound. even when playing audio- or video-files streamed from the internet could be the culprit. For the time being, just use the WDM-drivers. You can mix and edit with them as well. You don’t have the low latencies though, but if you don’t have to play any instruments or sort of you can do so. This at least takes the time-pressure and you can deal with the ASIO-problem later. I uninstalled audacity. But the problem persists. The Audio/Device Enable pulldown menus are blank and the driver pulldown menu will only allow me to choose the asio driver (it’s the only one available to select). |
|
|
|
|
|
#10 |
|
Human being with feelings
Join Date: Sep 2008 Location: Location Posts: 5,553 |
You can find «reaper.ini» (on XP) in «Documents and settings<username>application datareaper». dunno what the folder is called in Vista. You can rename it safely. your project and audio-files won’t be touched. If all doesn’t help, try re-installing the drivers of your soundcard. -Data |
|
|
|
|
|
#11 |
|
Human being with feelings
Join Date: Oct 2007 Location: Exmouth, England Posts: 2,687 |
In the program list, have you tried selecting Reaper (reset configuration to factory defaults)?
Pete |
|
|
|
|
|
#12 |
|
Human being with feelings
Join Date: Sep 2008 Location: Location Posts: 5,553 |
You didn’t need to uninstall Audacity. It’s just important that it doesn’t run at the same time as Reaper does. And Yes, If you haven’t installed Asio4all there is only one ASIO-driver — the one of your soundcard. But as I said, in the above menu «Audio System» don’t choose «ASIO» but «WDM Kernel Streaming» or better «WaveOut». This should give you at least the possibility to finish your work. -Data |
|
|
|
|
|
#13 |
|
Human being with feelings Join Date: Apr 2009 Posts: 12 |
Quote:
Originally Posted by Mr. Data You can find «reaper.ini» (on XP) in «Documents and settings<username>application datareaper». dunno what the folder is called in Vista. You can rename it safely. your project and audio-files won’t be touched. If all doesn’t help, try re-installing the drivers of your soundcard. If I uninstalled reaper and the re-installed it, would that help? Would all my corresponding audio files be lost? This is my first freelance home vo job and I’m not technically gifted whh! This is so frustrating. I really appreciate your help. |
|
|
|
|
|
#14 |
|
Human being with feelings
Join Date: Sep 2008 Location: Location Posts: 5,553 |
No, you don’t need to uninstall Reaper either. just rename your reaper.ini-file to reaper-orig.ini or something. Reaper will create a new .ini-file automatically if you start it again. If you don’t know where «reaper.ini» is, use windows’ search function to find it. Your soundfiles and project won’t be touched so you can safely do this. And — never mind! I see you have put a lot of effort into your project, so I can understand, that you are more than cautious, not doing anything wrong. -Data |
|
|
|
|
|
#15 |
|
Human being with feelings Join Date: Apr 2009 Posts: 12 |
STRATMAN SAVES THE DAY!!!!!! By the way, what’s the best way to cut/scissor/edit audio on ne track? This is my first time recording at home for a client and couldn’t be more frustrating. Learning a new program on the fly with a deadline looming is really stressing me out. Let’s hope this works. Please stay near your computers for further questions. Ha!
Last edited by Bronto; 04-05-2009 at 10:07 AM.
|
|
|
|
|
|
#16 |
|
Human being with feelings
Join Date: Apr 2006 Location: Denver, Colorado Posts: 1,681 |
To cut and edit, just select the track with the cursor where you want to cut and hit the «s» key. |
|
|
|
|
|
#17 |
|
Human being with feelings Join Date: Apr 2009 Posts: 12 |
Any idea how to fix another problem? While playing back a recording I find that certain words are clipped or cut? Is this a buffer problem? It happens a few times on every voice track I record, forcing me to re-record parts of my vo. |
|
|
|
|
|
#18 |
|
Human being with feelings Join Date: Apr 2009 Posts: 12 |
Quote:
Originally Posted by bigwoody To cut and edit, just select the track with the cursor where you want to cut and hit the «s» key. I hope so. When I move the cursor it seems to go to certain grid lines and make editing much more time consuming than it should be. I turned off the grid lines and I still find that the cursor is tough to guide through the timeline. By the way,tThank you all for welcoming me. |
|
|
|
|
|
#19 |
|
Super Moderator (no feelings)
Join Date: Dec 2007 Location: On or near a dike Posts: 9,820 |
Quote:
Originally Posted by Bronto Any idea how to fix another problem? While playing back a recording I find that certain words are clipped or cut? Is this a buffer problem? It happens a few times on every voice track I record, forcing me to re-record parts of my vo. First off, turn off the WLAN while recording. Secondly raise the latency settings of the driver. This may or may not help, the Inspiron 1525 may be not the ideal laptop for recording audio without some tweaking: http://forum.notebookreview.com/showthread.php?t=274915 |
|
|
|
|
|
#20 |
|
Human being with feelings
Join Date: Sep 2008 Location: Location Posts: 5,553 |
Quote:
Originally Posted by Bronto
By the way, what’s the best way to cut/scissor/edit audio on ne track? This can be accomplished in more then one ways. Fist you put you marker where you want to cut, then you press S, as Bigwoody wrote, and you have two items (the blocks containing audio- or MIDI-data are called «items» in Reaper). This BTW doesn’t at all alter your original soundfile, because all edits are non-destructive, which means that the original soundfile remains what it is. You can also make a time-selection and if you now press shift-S, the item gets cut at the start and the end of the selection. But in some cases it is better to just make a time-selection, press and hold the ctrl-key and pull everything highlighted where you want it to be (the original stays where it was before.) Now it depends, what you want to do. You can take the item and put it somewhere else or you can copy it by holding down the ctrl-key. If you want the gaps closed, if you take something away, you have to turn «Ripple edit» on. There are two modes: one that works only on selected tracks and one that works on all tracks. To place your pointer you can do two things: As you work with speech you don’t need the grid or snapping that much probably, so go to «Options -> Enable snapping» and untick it. If you need grid snapping and don’t want to use it temporarily press the shift-key while moving (an) item(s). If you’ve done something wrong, you can always undo it — even if your error is a few steps back. -Data
Last edited by Mr. Data; 04-05-2009 at 10:39 AM.
|
|
|
|
|
|
#21 |
|
Human being with feelings Join Date: Apr 2009 Posts: 12 |
Okay, now that I can get to my audio and edit it, I find that some tracks include dropout/cut or clipped sections in the timeline. Basically, I do voice overs and some words are cut off during recording. Is this a buffer, playback issue that can be fixed. When I encountered these problems I just rerecorded those sections(making for a long edit). Any thoughts? Problem 2 stemming from this problem is: |
|
|
|
|
|
#22 |
|
Human being with feelings Join Date: Apr 2009 Posts: 12 |
Quote:
Originally Posted by Steindork First off, turn off the WLAN while recording. Secondly raise the latency settings of the driver. This may or may not help, the Inspiron 1525 may be not the ideal laptop for recording audio without some tweaking: http://forum.notebookreview.com/showthread.php?t=274915 Thank you. |
|
|
|
|
|
#23 |
|
Human being with feelings
Join Date: Sep 2008 Location: Location Posts: 5,553 |
If your audio contains clips try to low down the record level and/or increase the distance to your microphone. If there are words cut off first play them back more than once. If they are always cut at the same point the recording isn’t ok. if what’s cut differs then it’s a playback issue. You don’t even need to be greedy with diskspace, so it’s better to switch off recording only one or two seconds after your last word. For the mic-problem I need more information. As you said, you have problems with your ASIO-driver, I presume, you have a second soundcard in your system. EDIT: Can’t help you with the WLAN-thing ‘cos I haven’t installed it. -Data |
|
|
|
|
|
#24 |
|
Super Moderator (no feelings)
Join Date: Dec 2007 Location: On or near a dike Posts: 9,820 |
Quote:
Originally Posted by Bronto How do you turn off the WLAN card?
|
|
|
|
|
|
#25 |
|
Human being with feelings Join Date: Apr 2009 Posts: 12 |
I never expected to find so many cool, helpful people on this thread. It’s been a tough few days trying to get my Dell Laptop Inspiron 1525 to run pro tools, audacity and reaper. Still no luck. I’m considering buying a new computer. Any thoughts before I blow a grand on a PC or Mac? |
|
|
|
|
|
#26 |
|
Human being with feelings
Join Date: Sep 2008 Location: Location Posts: 5,553 |
Hi Bronto, sorry to read this! If you wanna stick with Reaper, I’d suggest the PC-side. Ah yes, and I wouldn’t recommend to use a Laptop, but that’s how I see it — others may look at this differently. -Data
Last edited by Mr. Data; 04-06-2009 at 10:33 PM.
|
|
|
|
|
|
#27 |
|
Human being with feelings
Join Date: Oct 2007 Location: Exmouth, England Posts: 2,687 |
I keep thinking about your very first post, where you say: «When I go to preferences>audio>device I can see that the Asio Driver is there, but there is no audio enable input or output to choose from.» If I disconnect one of my Audio interfaces, then I still see the ASIO driver in Reaper, but with no input or output options. Is it possible that the Mbox isn’t connected to your system? If you go to the Windows control panel and click on the Sound icon, do you see it listed as one of your options? For example, this is what I see in Vista. Do you see the Mbox in this view on your computer?
But if I disconnected one of my devices it would disappear from this list. However, it would still be listed as an ASIO driver option in Reaper, but with no input or output options. Pete
Last edited by stratman; 04-07-2009 at 01:13 PM.
|
|
|
|
|
Forum Jump |
All times are GMT -7. The time now is 04:27 PM.
Powered by vBulletin® Version 3.8.11
Copyright ©2000 — 2023, vBulletin Solutions Inc.
-
#1
Не могу включить ASIO в Reaper 5.979 каждые несколько секунд кидает разные ошибки:
There was an error opening the audio hardware:
Error initializing ASIO buffers
или такую
There was an error opening the audio hardware:
Different ASIO sample types per stream, not compatible
Вообще на этом ASIO адекватно работает только FL Studio… Что REAPER, что музыкальный плеер (MusicBee) кидают ошибки инициализации
Настройки такие:
-
#2
А что за карта? Нажмите кнопку ASIO Configuration и сделайте скриншот.
-
#4
Я вижу, что Риалтек. Только не знал, что у встроенных карт бывают АСИО драйвера. Думал, может Риалтек уже какую то проф звук карту слепил — мало ли.
-
#5
@Aleksandr Oleynik,
Уже давно делают , только оно там почти не работает ))))))ну собственно как у ТС )
-
#7
@Aleksandr Oleynik,
Да наверное чтобы на коробке с материнкой гордо написать asio 2.o supported )
-
#8
Наверное.
Но тогда да — ASIO4ALL
-
#9
@Aleksandr Oleynik
чёт я читал что ASIO4ALL это эмулятор ASIO и он хуже чем «реальный» ASIO, хотя в случае с Realtek — вообще пофигу наверное… Да и в REAPER есть нормальная поддержка WSAPI (эксклюзивный режим), по задержкам идет наравне с ASIO
-
#10
Обратите внимание, пользователь заблокирован на форуме.
Вообще на этом ASIO адекватно работает только FL Studio… Что REAPER, что музыкальный плеер (MusicBee) кидают ошибки инициализации
есть карты которые не поддерживают шаринг ASIO
то-есть не могут работать по ASIO сразу с несколькими программами.
-
#11
есть карты которые не поддерживают шаринг ASIO
то-есть не могут работать по ASIO сразу с несколькими программами.
ну естественно я все аудиопрограммы выключаю при работе в Reaper/FL Studio, плеер я просто привел в пример как альтернативно-неработающей программы =)
-
#12
Обратите внимание, пользователь заблокирован на форуме.
купите карту хотя бы уровня фокусрайт соло второго или третьего поколения, зачем эти муки. Стоит копейки.
-
#14
есть карты которые не поддерживают шаринг ASIO
то-есть не могут работать по ASIO сразу с несколькими программами.
А какие могут?
-
#15
там какие-то ещё дрова.. у вас наверно не асио выставлено, по асио не должны.
-
#16
Первый раз слышу. Вы можете открыть две DAW и в каждой запустить плэй через ASIO ESI карты?
-
#17
@translator, вы уверенны, что плеер тоже работает через ASIO?
В нём можно выбрать тип драйвера?
Покажите скриншот.
PS: увидел на сайте плеера, действительно может —
- Вывод звука через
DirectSound / ASIO / WASAPI / WASAPI Exclusive
Т.е. вы действительно в плеере и в DAW выбрали ASIO и звук есть и там и там?
-
#18
у меня ESI Waveterminal, работает только что то одно через асио
-
#19
Так RME вроде могут. Или я что-то путаю?
-
#20
Обратите внимание, пользователь заблокирован на форуме.
удалил свои посты про Cool Edit Pro
не нашёл в программе настройки для ASIO, хотя думал что работает именно через ASIO,
оказывается этот редактор работает через какой-то свой драйвер со своим буфером памяти.
-
#21
Так RME вроде могут. Или я что-то путаю?
Путаете и сильно.
-
#22
не могут ) ESi могут через директ вейв — соединять потоки ASIO и WDM
два асио одновременно не могут ) .. и никакие не могут ..
кроме одной , которая еще не вышла в тираж
-
#23
Realtek ASIO удивил!
Тестил проект 96Khz, ASIO4ALL захлебывается сразу же, при переключении на Realtek ASIO скрипы пропадают.
Похоже проц меньше нагружается по сравнению с ASIO4ALL.
Но конечно никакой мультиклиентности.
-
#24
купите карту хотя бы уровня фокусрайт соло второго или третьего поколения, зачем эти муки. Стоит копейки.
Не рекомендую Focusrite
Купил на днях Focusrite 2i2 3 gen, до этого владел и пользовался самой простой Lexicon Alpha.
Лексикон работал совместно с Reaper стабильно без «вые**нов» под ASIO4ALL (родной драйвер конечно давал задержку).
Ожидал от Focusrite 2i2 3 gen как минимум не хуже результата как в установке (не искать лишних драйверов, включил и само все настроилось), ну и звук соответственно.
В результате «еб**ся» третьи сутки. Драйвера встают криво, Reaper ее вообще не видит, задержка, хрип….
Короче полная ХЕРЬ, своих денег не стоит.
ИМХО.
PS: Focusrite — самая продаваемая звуковая карта. Так заявляет производитель.
PPS: Mercedes benz the best or nothing.
-
#25
Что-то мне подсказывает, что или вы что-то не так делаете (настраиваете) или это проблема конкретного Вашего экземпляра карты. У меня Focusrite 6i6 2-го поколения — с самого начала работает как часы, ни единого артефакта за все время работы
-
#26
Ставил я этот реалтек но ноут, по-моему фигня. Asio4all и точка
-
#27
ASIO4ALL это эмулятор ASIO и он хуже чем «реальный» ASIO
Не всегда. Он правда субъективно чуть больше дает задержку (при игре с миди), но например его производительность сопоставима с ASIO от ur22. На 10ке впрочем у Asio4all почему-то пропала возможность пропускать другие карты
-
#28
Что-то мне подсказывает, что или вы что-то не так делаете (настраиваете) или это проблема конкретного Вашего экземпляра карты. У меня Focusrite 6i6 2-го поколения — с самого начала работает как часы, ни единого артефакта за все время работы
Вот нарыл инфу еще, пишут, что у многих такая проблема (щелчки, треск на выходе в наушники или мониторы) якобы карта плохо работает с AMD процессорами. Сам производитель это признает. Лечится каким то очередным драйвером, либо сменой USB порта (возможно через USB 3.0 должно работать).
Сегодня вечером проверю.
-
#29
//Realtek ASIO
У меня в материнке тож такой и тож не работает.
Так что всё нормально.
-
#30
якобы карта плохо работает с AMD процессорами
ну тут не знаю. у меня Intel
Содержание
- Reaper error initializing asio driver
- Reaper error initializing asio driver
- Reaper error initializing asio driver
- Reaper error initializing asio driver
- Reaper error initializing asio driver
Reaper error initializing asio driver
Suddenly hit a really annoying problem, whereby when I open REAPER I’m just being met with an «Error opening devices» message saying: «There was an error opening the audio hardware: Error initializing ASIO driver.»
Thing is nothing has changed! There was a windows update that came through almost a week ago, but after that installed I used REAPER for several days without any problems. The other day, though, this started happening. If I change the Audio System to something else then it will work, but in the past I’ve found it to have more latency issues, so I’ve preferred to stick to ASIO.
I’ve tried updating the driver(s) to my audio interface (Roland Quad-Capture), but that comes back saying it’s running the latest. I’ve checked the Roland website and found I am. I wasn’t running the latest version of REAPER, so downloaded that but still getting it.
While Googling I saw something about going to the computer’s Device Manager and locating Universal ASIO Driver, then making sure that’s up to date; but I can’t find that anywhere in my Device Manager.
Other than that I feel I’ve exhausted all options, so any help anyone can offer would be greatly appreciated!
«Universal ASIO Driver?» I don’t believe there is any such thing. It’s certainly not something that would ever show up in device manager because drivers tend to be specific to hardware, and device manager is a list of hardware components, not drivers (though it can tell you which drivers they are using).
The closest thing to that I think would ASIO4All, which is a hack intended for devices that don’t actually support ASIO, and also won’t show up in device manager.
Usually the problem you describe is hardware related. It could mean your cable is bad or the port it’s plugged into, or even the audio device itself.
Can you try your Roland on another computer? You just need to troubleshoot and rule out every part of the chain.
You could also try uninstalling your device driver and reinstalling it (with a reboot in between). Something may have become corrupted there.
Источник
Reaper error initializing asio driver
Suddenly hit a really annoying problem, whereby when I open REAPER I’m just being met with an «Error opening devices» message saying: «There was an error opening the audio hardware: Error initializing ASIO driver.»
Thing is nothing has changed! There was a windows update that came through almost a week ago, but after that installed I used REAPER for several days without any problems. The other day, though, this started happening. If I change the Audio System to something else then it will work, but in the past I’ve found it to have more latency issues, so I’ve preferred to stick to ASIO.
I’ve tried updating the driver(s) to my audio interface (Roland Quad-Capture), but that comes back saying it’s running the latest. I’ve checked the Roland website and found I am. I wasn’t running the latest version of REAPER, so downloaded that but still getting it.
While Googling I saw something about going to the computer’s Device Manager and locating Universal ASIO Driver, then making sure that’s up to date; but I can’t find that anywhere in my Device Manager.
Other than that I feel I’ve exhausted all options, so any help anyone can offer would be greatly appreciated!
«Universal ASIO Driver?» I don’t believe there is any such thing. It’s certainly not something that would ever show up in device manager because drivers tend to be specific to hardware, and device manager is a list of hardware components, not drivers (though it can tell you which drivers they are using).
The closest thing to that I think would ASIO4All, which is a hack intended for devices that don’t actually support ASIO, and also won’t show up in device manager.
Usually the problem you describe is hardware related. It could mean your cable is bad or the port it’s plugged into, or even the audio device itself.
Can you try your Roland on another computer? You just need to troubleshoot and rule out every part of the chain.
You could also try uninstalling your device driver and reinstalling it (with a reboot in between). Something may have become corrupted there.
Источник
Reaper error initializing asio driver
I kept getting this error:-
There was an error opening the audio hardware:
Error initializing ASIO driver
I took out All the plugins from the Progam Files/VSTPlugins Folder and that did not work.
In Device Manager I disabled The following Drivers:-
AMD High Definition Audio Device
Realtek High Definition Audio
And that did not work. The saffire Driver still gave the error as above.
I disabled The Creative SB X-Fi Driver AND THAT WORKED for a while.
So In the Start I typed in Playing Audio and ran the Troubleshooter and restarted the Computer but left the Audio Interface switched on and that did work for a while.
Update 7th May 2020
I Switched the Focusrite Interface on first and then the computer. Start Reaper and I get the error message. After a short while the error message disappears after the Saffire driver comes to life in Device manager. Still no sound, but the error message does not show.
I fired up Windows media Player and You Tube to see if there was sound and there was no sound on them.
I unplugged The The Creative SB X-Fi (Driver still disabled) from the back of the computer and rebooted The Interface and The saffire Driver fired up in Device manager.
Fired up Reaper, Still no sound.
I uninstalled The Saffire Driver and rebooted the Computer.
In Device Manager The Saffire Driver Fired up which is impossible but that is what happened. Maybe it did not uninstall.
I hit update Driver and I had the best drivers already installed
Fired up Reaper and there was sound.
The interface was making a very loud continuous buzzing noise so I unplugged (from the Computer) the SEAGATE EXTERNAL HARD DRIVE
AND THAT WORKED FOR A WHILE.
Because the Interface is powered by a Fire Wire, could the external hard drive USB have been robbing the Interface of power?
Or just clashing with it?
I’ve found the Problem, Microsoft no longer support Firewire and the 1394 OHCI Compliant Host Controller (firewire card in Device Manager)
Search for
Fixing FireWire Problems
With Windows 10, 8 and 7
It is on studio1productions
or Via tomshardware
Followed The very good instructions (ABOVE) to install The Legacy Drivers for my Firewire card. Checked the Bios to see if it was enabled.
That did not work.
I have written to Focusrite and await their reply.
I will update ASAP but I’ll probably have to buy a new Interface.
I’ve been in contact with Focusrite by phone. They confirmed that Microsoft no longer support Firewire.
He did say you could try and find a Firewire card to install in your computer but you are better off buying another Interface.
What he said next surprised me and pleased me.
I had better not say exactly what he said, but put it like this, Focusrite will look after you beyond belief.
I bought a Scarlett 18i8 direct from Focusrite and I’m very happy.
I have a Focusrite Saffire Pro 26 Interface.
I use Reaper with ASIO Saffire.
I have Windows X
Note: Focusrite recommend to use Saffire ASIO and not ASIO4all
I have reinstalled The saffire Driver many times direct from Focusrite.
Источник
Reaper error initializing asio driver
Suddenly hit a really annoying problem, whereby when I open REAPER I’m just being met with an «Error opening devices» message saying: «There was an error opening the audio hardware: Error initializing ASIO driver.»
Thing is nothing has changed! There was a windows update that came through almost a week ago, but after that installed I used REAPER for several days without any problems. The other day, though, this started happening. If I change the Audio System to something else then it will work, but in the past I’ve found it to have more latency issues, so I’ve preferred to stick to ASIO.
I’ve tried updating the driver(s) to my audio interface (Roland Quad-Capture), but that comes back saying it’s running the latest. I’ve checked the Roland website and found I am. I wasn’t running the latest version of REAPER, so downloaded that but still getting it.
While Googling I saw something about going to the computer’s Device Manager and locating Universal ASIO Driver, then making sure that’s up to date; but I can’t find that anywhere in my Device Manager.
Other than that I feel I’ve exhausted all options, so any help anyone can offer would be greatly appreciated!
«Universal ASIO Driver?» I don’t believe there is any such thing. It’s certainly not something that would ever show up in device manager because drivers tend to be specific to hardware, and device manager is a list of hardware components, not drivers (though it can tell you which drivers they are using).
The closest thing to that I think would ASIO4All, which is a hack intended for devices that don’t actually support ASIO, and also won’t show up in device manager.
Usually the problem you describe is hardware related. It could mean your cable is bad or the port it’s plugged into, or even the audio device itself.
Can you try your Roland on another computer? You just need to troubleshoot and rule out every part of the chain.
You could also try uninstalling your device driver and reinstalling it (with a reboot in between). Something may have become corrupted there.
Источник
Reaper error initializing asio driver
What is this? Every time I open Reaper I get this error message.
I have a new M Audio Fast Track Pro usb’d to my PC. I’m simultaneously watching the Kenny Gioia Reaper Tutorial I downloaded.
Pick your correct updated drivers and get them from here and install them
Make sure you get the correct ones for your Operating system.
HTH 
I also get this error message
I’m using Behringer F-Control (firewire) on Vista. I downloaded the right driver too 
Does anyone else know about this one?
I also get this error message
I’m using Behringer F-Control (firewire) on Vista. I downloaded the right driver too Does anyone else know about this one?
Try this.
Depending on your O/S.Open the control panel and then go to the Administrative Tools/vent viewer and make a short cut from it to your desktop(Makes things easier).
Now highlight each event and clear it’s log,don’t save them when prompted as they will be old and useless.
Now recreate the problem and go back to the events and copy and past info that you may think can help track it down into Google.
^ thanks for the hint
This is what the log says
Log Name: Security
Source: Microsoft-Windows-Security-Auditing
Date: 1/9/2011 10:46:20 PM
Event ID: 5038
Task Category: System Integrity
Level: Information
Keywords: Audit Failure
User: N/A
Computer: t0Fu3
Description:
Code integrity determined that the image hash of a file is not valid. The file could be corrupt due to unauthorized modification or the invalid hash could indicate a potential disk device error.
File Name: DeviceHarddiskVolume2WindowsSystem32driversf ca202.sys
If Windows Firewall is enabled try disabling it?
I use a free one called Ashampoo,
Small and unobtrusive.
^ thanks, I’ll try that later
Yeah, I’ve even just discovered that they have a new version of the driver, so I installed it. But the error thing shows up again >__
Ok, so I’ve disabled Windows Firewall. Because ashampoo doesn’t work on Vista, I installed Comodo.
But it still doesn’t work D
I’ve installed Live Lite 4 but it gives me the message
«Failed to open the audio device «Behringer FCA202 ASIO».
I’m pissed off, but I’m still going to try installing the updated Live Lite 8 first and see if that one works.
Источник
Содержание
- Reaper error initializing asio driver
- Reaper error initializing asio driver
- Reaper error initializing asio driver
- Reaper error initializing asio driver
- Reaper error initializing asio driver
Reaper error initializing asio driver
Suddenly hit a really annoying problem, whereby when I open REAPER I’m just being met with an «Error opening devices» message saying: «There was an error opening the audio hardware: Error initializing ASIO driver.»
Thing is nothing has changed! There was a windows update that came through almost a week ago, but after that installed I used REAPER for several days without any problems. The other day, though, this started happening. If I change the Audio System to something else then it will work, but in the past I’ve found it to have more latency issues, so I’ve preferred to stick to ASIO.
I’ve tried updating the driver(s) to my audio interface (Roland Quad-Capture), but that comes back saying it’s running the latest. I’ve checked the Roland website and found I am. I wasn’t running the latest version of REAPER, so downloaded that but still getting it.
While Googling I saw something about going to the computer’s Device Manager and locating Universal ASIO Driver, then making sure that’s up to date; but I can’t find that anywhere in my Device Manager.
Other than that I feel I’ve exhausted all options, so any help anyone can offer would be greatly appreciated!
«Universal ASIO Driver?» I don’t believe there is any such thing. It’s certainly not something that would ever show up in device manager because drivers tend to be specific to hardware, and device manager is a list of hardware components, not drivers (though it can tell you which drivers they are using).
The closest thing to that I think would ASIO4All, which is a hack intended for devices that don’t actually support ASIO, and also won’t show up in device manager.
Usually the problem you describe is hardware related. It could mean your cable is bad or the port it’s plugged into, or even the audio device itself.
Can you try your Roland on another computer? You just need to troubleshoot and rule out every part of the chain.
You could also try uninstalling your device driver and reinstalling it (with a reboot in between). Something may have become corrupted there.
Источник
Reaper error initializing asio driver
Suddenly hit a really annoying problem, whereby when I open REAPER I’m just being met with an «Error opening devices» message saying: «There was an error opening the audio hardware: Error initializing ASIO driver.»
Thing is nothing has changed! There was a windows update that came through almost a week ago, but after that installed I used REAPER for several days without any problems. The other day, though, this started happening. If I change the Audio System to something else then it will work, but in the past I’ve found it to have more latency issues, so I’ve preferred to stick to ASIO.
I’ve tried updating the driver(s) to my audio interface (Roland Quad-Capture), but that comes back saying it’s running the latest. I’ve checked the Roland website and found I am. I wasn’t running the latest version of REAPER, so downloaded that but still getting it.
While Googling I saw something about going to the computer’s Device Manager and locating Universal ASIO Driver, then making sure that’s up to date; but I can’t find that anywhere in my Device Manager.
Other than that I feel I’ve exhausted all options, so any help anyone can offer would be greatly appreciated!
«Universal ASIO Driver?» I don’t believe there is any such thing. It’s certainly not something that would ever show up in device manager because drivers tend to be specific to hardware, and device manager is a list of hardware components, not drivers (though it can tell you which drivers they are using).
The closest thing to that I think would ASIO4All, which is a hack intended for devices that don’t actually support ASIO, and also won’t show up in device manager.
Usually the problem you describe is hardware related. It could mean your cable is bad or the port it’s plugged into, or even the audio device itself.
Can you try your Roland on another computer? You just need to troubleshoot and rule out every part of the chain.
You could also try uninstalling your device driver and reinstalling it (with a reboot in between). Something may have become corrupted there.
Источник
Reaper error initializing asio driver
I kept getting this error:-
There was an error opening the audio hardware:
Error initializing ASIO driver
I took out All the plugins from the Progam Files/VSTPlugins Folder and that did not work.
In Device Manager I disabled The following Drivers:-
AMD High Definition Audio Device
Realtek High Definition Audio
And that did not work. The saffire Driver still gave the error as above.
I disabled The Creative SB X-Fi Driver AND THAT WORKED for a while.
So In the Start I typed in Playing Audio and ran the Troubleshooter and restarted the Computer but left the Audio Interface switched on and that did work for a while.
Update 7th May 2020
I Switched the Focusrite Interface on first and then the computer. Start Reaper and I get the error message. After a short while the error message disappears after the Saffire driver comes to life in Device manager. Still no sound, but the error message does not show.
I fired up Windows media Player and You Tube to see if there was sound and there was no sound on them.
I unplugged The The Creative SB X-Fi (Driver still disabled) from the back of the computer and rebooted The Interface and The saffire Driver fired up in Device manager.
Fired up Reaper, Still no sound.
I uninstalled The Saffire Driver and rebooted the Computer.
In Device Manager The Saffire Driver Fired up which is impossible but that is what happened. Maybe it did not uninstall.
I hit update Driver and I had the best drivers already installed
Fired up Reaper and there was sound.
The interface was making a very loud continuous buzzing noise so I unplugged (from the Computer) the SEAGATE EXTERNAL HARD DRIVE
AND THAT WORKED FOR A WHILE.
Because the Interface is powered by a Fire Wire, could the external hard drive USB have been robbing the Interface of power?
Or just clashing with it?
I’ve found the Problem, Microsoft no longer support Firewire and the 1394 OHCI Compliant Host Controller (firewire card in Device Manager)
Search for
Fixing FireWire Problems
With Windows 10, 8 and 7
It is on studio1productions
or Via tomshardware
Followed The very good instructions (ABOVE) to install The Legacy Drivers for my Firewire card. Checked the Bios to see if it was enabled.
That did not work.
I have written to Focusrite and await their reply.
I will update ASAP but I’ll probably have to buy a new Interface.
I’ve been in contact with Focusrite by phone. They confirmed that Microsoft no longer support Firewire.
He did say you could try and find a Firewire card to install in your computer but you are better off buying another Interface.
What he said next surprised me and pleased me.
I had better not say exactly what he said, but put it like this, Focusrite will look after you beyond belief.
I bought a Scarlett 18i8 direct from Focusrite and I’m very happy.
I have a Focusrite Saffire Pro 26 Interface.
I use Reaper with ASIO Saffire.
I have Windows X
Note: Focusrite recommend to use Saffire ASIO and not ASIO4all
I have reinstalled The saffire Driver many times direct from Focusrite.
Источник
Reaper error initializing asio driver
Suddenly hit a really annoying problem, whereby when I open REAPER I’m just being met with an «Error opening devices» message saying: «There was an error opening the audio hardware: Error initializing ASIO driver.»
Thing is nothing has changed! There was a windows update that came through almost a week ago, but after that installed I used REAPER for several days without any problems. The other day, though, this started happening. If I change the Audio System to something else then it will work, but in the past I’ve found it to have more latency issues, so I’ve preferred to stick to ASIO.
I’ve tried updating the driver(s) to my audio interface (Roland Quad-Capture), but that comes back saying it’s running the latest. I’ve checked the Roland website and found I am. I wasn’t running the latest version of REAPER, so downloaded that but still getting it.
While Googling I saw something about going to the computer’s Device Manager and locating Universal ASIO Driver, then making sure that’s up to date; but I can’t find that anywhere in my Device Manager.
Other than that I feel I’ve exhausted all options, so any help anyone can offer would be greatly appreciated!
«Universal ASIO Driver?» I don’t believe there is any such thing. It’s certainly not something that would ever show up in device manager because drivers tend to be specific to hardware, and device manager is a list of hardware components, not drivers (though it can tell you which drivers they are using).
The closest thing to that I think would ASIO4All, which is a hack intended for devices that don’t actually support ASIO, and also won’t show up in device manager.
Usually the problem you describe is hardware related. It could mean your cable is bad or the port it’s plugged into, or even the audio device itself.
Can you try your Roland on another computer? You just need to troubleshoot and rule out every part of the chain.
You could also try uninstalling your device driver and reinstalling it (with a reboot in between). Something may have become corrupted there.
Источник
Reaper error initializing asio driver
What is this? Every time I open Reaper I get this error message.
I have a new M Audio Fast Track Pro usb’d to my PC. I’m simultaneously watching the Kenny Gioia Reaper Tutorial I downloaded.
Pick your correct updated drivers and get them from here and install them
Make sure you get the correct ones for your Operating system.
HTH
I also get this error message
I’m using Behringer F-Control (firewire) on Vista. I downloaded the right driver too Does anyone else know about this one?
I also get this error message
I’m using Behringer F-Control (firewire) on Vista. I downloaded the right driver too Does anyone else know about this one?
Try this.
Depending on your O/S.Open the control panel and then go to the Administrative Tools/vent viewer and make a short cut from it to your desktop(Makes things easier).
Now highlight each event and clear it’s log,don’t save them when prompted as they will be old and useless.
Now recreate the problem and go back to the events and copy and past info that you may think can help track it down into Google.
^ thanks for the hint
This is what the log says
Log Name: Security
Source: Microsoft-Windows-Security-Auditing
Date: 1/9/2011 10:46:20 PM
Event ID: 5038
Task Category: System Integrity
Level: Information
Keywords: Audit Failure
User: N/A
Computer: t0Fu3
Description:
Code integrity determined that the image hash of a file is not valid. The file could be corrupt due to unauthorized modification or the invalid hash could indicate a potential disk device error.
File Name: DeviceHarddiskVolume2WindowsSystem32driversf ca202.sys
If Windows Firewall is enabled try disabling it?
I use a free one called Ashampoo,
Small and unobtrusive.
^ thanks, I’ll try that later
Yeah, I’ve even just discovered that they have a new version of the driver, so I installed it. But the error thing shows up again >__
Ok, so I’ve disabled Windows Firewall. Because ashampoo doesn’t work on Vista, I installed Comodo.
But it still doesn’t work D
I’ve installed Live Lite 4 but it gives me the message
«Failed to open the audio device «Behringer FCA202 ASIO».
I’m pissed off, but I’m still going to try installing the updated Live Lite 8 first and see if that one works.
Источник
Same issue, Reaper is running as admin, set the Yamaha ASIO is set to standard mode, 128 samples buffer. Getting this in the logs:
Couldn’t enable registry filter
Info log:
Log line format: [IWEF]mmdd hh:mm:ss.uuuuuu threadid file:line] msg
I0504 09:11:10.621328 788 dllmain.cpp:43] Initializing SarAsio.
I0504 09:11:10.622326 788 wrapper.cpp:33] SarAsioWrapper::SarAsioWrapper
I0504 09:11:10.623324 788 wrapper.cpp:39] SarAsioWrapper::init
I0504 09:11:10.623324 788 tinyasio.cpp:31] Querying installed ASIO drivers.
I0504 09:11:10.623822 788 tinyasio.cpp:75] Found ASIO driver: ASIO4ALL v2 with CLSID {232685C6-6548-49D8-846D-4141A3EF7560}
I0504 09:11:10.625819 788 tinyasio.cpp:75] Found ASIO driver: FlexASIO with CLSID {462F2ABF-5278-436A-95B6-72CBF65482AE}
I0504 09:11:10.626318 788 tinyasio.cpp:75] Found ASIO driver: ReaRoute ASIO (x64) with CLSID {9761988D-FB5D-4258-9AE4-0B99B5D5FD33}
I0504 09:11:10.626318 788 tinyasio.cpp:75] Found ASIO driver: Synchronous Audio Router with CLSID {0569D852-1F6A-44A7-B7B5-EFB78B66BE21}
I0504 09:11:10.626318 788 tinyasio.cpp:75] Found ASIO driver: Yamaha Steinberg USB ASIO with CLSID {CB7F9FFD-A33B-48B2-8BC0-437D94F37142}
I0504 09:11:10.626318 788 tinyasio.cpp:80] Done querying ASIO drivers. Status: 259
I0504 09:11:11.826647 788 wrapper.cpp:52] Sample type: 18, sample size: 4
I0504 09:11:11.826647 788 wrapper.cpp:59] SarAsioWrapper::getDriverName
I0504 09:11:11.826647 788 wrapper.cpp:65] SarAsioWrapper::getDriverVersion
I0504 09:11:11.826647 788 wrapper.cpp:225] SarAsioWrapper::setSampleRate
I0504 09:11:11.826647 788 wrapper.cpp:109] SarAsioWrapper::getChannels
I0504 09:11:11.827145 788 wrapper.cpp:142] SarAsioWrapper::getBufferSize
I0504 09:11:11.827145 788 wrapper.cpp:213] SarAsioWrapper::getSampleRate
I0504 09:11:11.827145 788 wrapper.cpp:213] SarAsioWrapper::getSampleRate
I0504 09:11:11.827145 788 wrapper.cpp:323] SarAsioWrapper::createBuffers(infos, 2, 128, callbacks)
I0504 09:11:11.827145 788 wrapper.cpp:418] Creating inner driver buffers. Count: 2 BufferSize: 128 Callbacks: 0000000009BB9FD8 SampleType: 18 SampleSize: 4
I0504 09:11:11.827145 788 wrapper.cpp:426] ChannelInfo: buffer[0]: 0000000000000000 buffer[1]: 0000000000000000 index: 0 isInput: 1
I0504 09:11:11.827145 788 wrapper.cpp:426] ChannelInfo: buffer[0]: 0000000000000000 buffer[1]: 0000000000000000 index: 0 isInput: 0
I0504 09:11:12.413529 788 wrapper.cpp:548] SarAsioWrapper::future
I0504 09:11:12.413529 788 wrapper.cpp:225] SarAsioWrapper::setSampleRate
I0504 09:11:12.413529 788 wrapper.cpp:129] SarAsioWrapper::getLatencies
I0504 09:11:12.413529 788 wrapper.cpp:77] SarAsioWrapper::start
I0504 09:11:12.414528 788 mmwrapper.cpp:113] Initializing SarMMDeviceEnumerator.
I0504 09:11:12.415028 788 mmwrapper.cpp:126] Initialized SarMMDeviceEnumerator.
I0504 09:11:12.415028 788 mmwrapper.cpp:301] SarMMDeviceEnumerator::RegisterEndpointNotificationCallback
E0504 09:11:12.432493 788 sarclient.cpp:209] Couldn’t enable registry filter
I0504 09:11:25.533565 788 wrapper.cpp:95] SarAsioWrapper::stop
I0504 09:11:25.533565 788 mmwrapper.cpp:313] SarMMDeviceEnumerator::UnregisterEndpointNotificationCallback
I0504 09:11:25.545804 788 wrapper.cpp:497] SarAsioWrapper::disposeBuffers
I0504 09:11:25.546311 788 wrapper.cpp:95] SarAsioWrapper::stop
I0504 09:11:25.758189 788 wrapper.cpp:33] SarAsioWrapper::SarAsioWrapper
I0504 09:11:25.758688 788 wrapper.cpp:39] SarAsioWrapper::init
I0504 09:11:25.758688 788 tinyasio.cpp:31] Querying installed ASIO drivers.
I0504 09:11:25.759188 788 tinyasio.cpp:75] Found ASIO driver: ASIO4ALL v2 with CLSID {232685C6-6548-49D8-846D-4141A3EF7560}
I0504 09:11:25.759188 788 tinyasio.cpp:75] Found ASIO driver: FlexASIO with CLSID {462F2ABF-5278-436A-95B6-72CBF65482AE}
I0504 09:11:25.759188 788 tinyasio.cpp:75] Found ASIO driver: ReaRoute ASIO (x64) with CLSID {9761988D-FB5D-4258-9AE4-0B99B5D5FD33}
I0504 09:11:25.759686 788 tinyasio.cpp:75] Found ASIO driver: Synchronous Audio Router with CLSID {0569D852-1F6A-44A7-B7B5-EFB78B66BE21}
I0504 09:11:25.759686 788 tinyasio.cpp:75] Found ASIO driver: Yamaha Steinberg USB ASIO with CLSID {CB7F9FFD-A33B-48B2-8BC0-437D94F37142}
I0504 09:11:25.759686 788 tinyasio.cpp:80] Done querying ASIO drivers. Status: 259
I0504 09:11:26.895817 788 wrapper.cpp:52] Sample type: 18, sample size: 4
I0504 09:11:26.895817 788 wrapper.cpp:59] SarAsioWrapper::getDriverName
I0504 09:11:26.895817 788 wrapper.cpp:65] SarAsioWrapper::getDriverVersion
I0504 09:11:26.895817 788 wrapper.cpp:109] SarAsioWrapper::getChannels
I0504 09:11:31.849972 788 wrapper.cpp:33] SarAsioWrapper::SarAsioWrapper
I0504 09:11:31.850473 788 wrapper.cpp:39] SarAsioWrapper::init
I0504 09:11:31.850473 788 tinyasio.cpp:31] Querying installed ASIO drivers.
I0504 09:11:31.850473 788 tinyasio.cpp:75] Found ASIO driver: ASIO4ALL v2 with CLSID {232685C6-6548-49D8-846D-4141A3EF7560}
I0504 09:11:31.850970 788 tinyasio.cpp:75] Found ASIO driver: FlexASIO with CLSID {462F2ABF-5278-436A-95B6-72CBF65482AE}
I0504 09:11:31.850970 788 tinyasio.cpp:75] Found ASIO driver: ReaRoute ASIO (x64) with CLSID {9761988D-FB5D-4258-9AE4-0B99B5D5FD33}
I0504 09:11:31.850970 788 tinyasio.cpp:75] Found ASIO driver: Synchronous Audio Router with CLSID {0569D852-1F6A-44A7-B7B5-EFB78B66BE21}
I0504 09:11:31.851469 788 tinyasio.cpp:75] Found ASIO driver: Yamaha Steinberg USB ASIO with CLSID {CB7F9FFD-A33B-48B2-8BC0-437D94F37142}
I0504 09:11:31.851469 788 tinyasio.cpp:80] Done querying ASIO drivers. Status: 259
I0504 09:11:32.981930 788 wrapper.cpp:52] Sample type: 18, sample size: 4
I0504 09:11:32.981930 788 wrapper.cpp:59] SarAsioWrapper::getDriverName
I0504 09:11:32.981930 788 wrapper.cpp:65] SarAsioWrapper::getDriverVersion
I0504 09:11:32.981930 788 wrapper.cpp:530] SarAsioWrapper::controlPanel
I0504 09:11:32.981930 788 tinyasio.cpp:31] Querying installed ASIO drivers.
I0504 09:11:32.982429 788 tinyasio.cpp:75] Found ASIO driver: ASIO4ALL v2 with CLSID {232685C6-6548-49D8-846D-4141A3EF7560}
I0504 09:11:32.982429 788 tinyasio.cpp:75] Found ASIO driver: FlexASIO with CLSID {462F2ABF-5278-436A-95B6-72CBF65482AE}
I0504 09:11:32.982928 788 tinyasio.cpp:75] Found ASIO driver: ReaRoute ASIO (x64) with CLSID {9761988D-FB5D-4258-9AE4-0B99B5D5FD33}
I0504 09:11:32.982928 788 tinyasio.cpp:75] Found ASIO driver: Synchronous Audio Router with CLSID {0569D852-1F6A-44A7-B7B5-EFB78B66BE21}
I0504 09:11:32.982928 788 tinyasio.cpp:75] Found ASIO driver: Yamaha Steinberg USB ASIO with CLSID {CB7F9FFD-A33B-48B2-8BC0-437D94F37142}
I0504 09:11:32.982928 788 tinyasio.cpp:80] Done querying ASIO drivers. Status: 259