Ошибка при установке element 3d - Ремонт и установка крупной бытовой техники

And btw, here’s the crash logs after updating AE to v15.1.2

<?xml version=»1.0″?>

<!DOCTYPE AdobeCrashReport SYSTEM «AdobeCrashReporter.dtd»>

</thread>

</backtrace>

</registerSet>

</binaryImageSet>

Mini

</dumpType>

</crash>

</crashreport>

Источник

“Error code: 54”; «Error code: 74»; “Error code: 1000”; “Err: 51”; “Error code: 109”; “Error code: 64” or Other Installer Error — See Possible Solutions Below — Each is its own separate solution.

1st Solution: Close Adobe After Effects before running Element 3D installer. You may need to reboot your computer in case Adobe After Effects is still running in the background processes. Try to run the installer again.

2nd Solution: Make sure you have Administrator privileges when installing the pack. The folders for the Element 3D assets and the After Effects Plug-ins folder should have full admin privileges also. Then run the installer again to see if it works. *** Tip: On Windows you can right click the installer and choose “Run as Administrator” ***

3rd Solution: Run full Element 3D installer again (not the patch) and choose a local location for the Element 3D assets that’s on the same hard-drive that you’re using to run the installer. Then try to complete the installation.

4th Solution: Run full Element 3D installer and choose a custom location for the Element 3D assets. For testing purposes we recommend the Desktop.

If error continues even after choosing a custom location for the 3D assets, then it may be a problem with the AE Plug-ins location.

To solve this, run the full Element 3D installer again and choose a custom location for both the Element 3D assets and where the plug-in is installed.

To choose a custom location for the plug-in, uncheck all versions of After Effects that may be selected. Check custom option (choose 64bit or 32bit depending on your After Effects version), then browse your Desktop as the location.

Finish the Element 3D installation. Go to your Desktop and manually drag the Element 3D plug-in (not the Element 3D Assets) into your After Effects Plug-ins folder.

Windows: C:Program FilesAdobeAdobe After Effects CS6Support FilesPlug-ins

Mac: ApplicationsAdobe After Effects CS6Plug-ins

***Choose your version of Adobe After Effects if you’re not using CS6.***

Источник

And btw, here’s the crash logs after updating AE to v15.1.2

<?xml version=»1.0″?>

<!DOCTYPE AdobeCrashReport SYSTEM «AdobeCrashReporter.dtd»>

</thread>

</backtrace>

</registerSet>

</binaryImageSet>

Mini

</dumpType>

</crash>

</crashreport>

And btw, here’s the crash logs after updating AE to v15.1.2

<?xml version=»1.0″?>

<!DOCTYPE AdobeCrashReport SYSTEM «AdobeCrashReporter.dtd»>

</thread>

</backtrace>

</registerSet>

</binaryImageSet>

Mini

</dumpType>

</crash>

</crashreport>

Источник

Hi,

So, my PC is fresh. Recently formatted it and its good to go. I’ve installed Adobe Creative Cloud and then Element 3D without any problems. Also, I’ve installed Optical Flares, too, without any problems.

But when I’ve tried to install Pro Shaders 2, an error code: 1022 appeared. The weird thing is that inside E3D I was able to see the materials, but when I click them, the object’s color change, not the texture, because the original folder that contains these materials is empty. The installer didn’t install the textures, just an empty folder and sub folders which is a «half-success» installation lol.

I’ve tried contacting the support team and they replied back to me with this:

**This has to do with the location chosen for the Element 3D assets when Element 3D was installed. It could also be a permissions issue.

First Solution: Make sure you have Administrator privileges when installing the pack. The folders for the Element 3D assets and the After Effects Plug-ins folder should have full admin privileges also. Then run the Model Pack installer again to see if it works.

Second Solution: Run the full Element 3D installer again (not the patch) and choose a local location for the Element 3D assets that’s on the same hard-drive that you’re using to run the installers. Then run the pack installer again and see if that works.

Third Solution: Run the full Element 3D installer (not the patch installer) and choose a custom location for the Element 3D assets. For testing purposes we recommend your Desktop. Complete the Element 3D installation and then run the Pro Shaders 2 installer again and try that.

If you still need the Element 3D assets installed in the location you originally wanted, then run the Element 3D installer again, choose the original location for the Element 3D assets, and then manually move the Pro Shaders 2 assets from your Desktop to that location.**

I’ve tried running the Pro Shader 2 installer as admin, but still no use. I’m not so sure about what the support team said «Run the full Element 3D installer (not the patch installer)»? I mean, I only have one installer after all, so what patch are they talking about.

Anyways, I’ve decided to uninstall Element 3D completely and re-install it again, but this time I will choose the default location for the assets in drive C, instead of using a custom location. Sadly, (I regret uninstalling it) the same error appeared for E3D installer as well.

Thanks you, VC!

Now, I have neither Element 3D nor Pro Shaders 2 X(

EDIT: I was able to install Element 3D again. I’ve passed the error by re-selecting the same custom asset directory, instead of the default drive C which gave me the error in the first place. But still no solution or response from the support about Pro Shaders 2.

EDIT: Somehow, I’ve managed to install Pro Shaders 2, but still not a complete install, but at least all the materials are there except for the brick folder.

Источник

Уже много раз меня просили объяснить, что за ошибка ВДРУГ возникает при работе в плагине от VideoCopilot Element 3D v2. Работал, работал и вот все — больше не запускается! :TT_TT:

Failed to initialize OpenGL
Element failed to initialize OpenGL.
Please ensure your GPU drivers are up to date, and that your GPU is compatible.

Удалось выяснить следующее — ошибка связана с новыми версиями драйверов от AMD. У всех пострадавших оказалась видеокарта из серии AMD Radeon HD. Экспериментальным путем обнаружили последнюю рабочую версию драйверов: 16.1. Все, что вышло после, вызывает ошибку OpenGL.

Так что, несмотря на надпись «ensure your GPU drivers are up to date» обновлять драйвера не стоит, если хотите и дальше работать с этим плагином в After Effects.

!	Сообщение от aeplug
Или обновить сам плагин Element 3D до версии 2.2.2.2147. На момент написания (24.07.2016) последние драйверы 16.7.2 работают с ней нормально.

Источник