Ошибка трансляции cannot run translation program powermill

Проблема

При импорте файлов матмодели в PowerMill появляется следующее сообщение об ошибке:

Причины

возможные причины;

• AMDEU (Autodesk Manufacturing Data Exchange Utility) не установлен или неправильно зарегистрирован в системе.
• Импортируемая матмодель пуста. (Файл имеет нулевое значение).
• Импортированная CAD модель является psmodel.

Решение

Чтобы удалить ошибку из PowerMill, попробуйте выполнить одно из следующих действий:

AMDEU не установлен

• Установите AMDEU, переустановив PowerMill. 

AMDEU уже установлен

• Запустите COM Register Autodesk Manufacturing Data Exchange Utility от имени администратора. Примечание. Если регистрация текущей версии COM не работает, попробуйте использовать предыдущую версию.

См. также:

• Ошибка: «Ошибка транслятора — Не удается запустить программу перевода. Убедитесь, что программа Autodesk Manufacturing Data Exchange Utility установлена и правильно зарегистрирована. При импорте pvz файла в PowerMill
• Ошибка «Ошибка транслятора» при импорте шести файлов Rhino в PowerMill

Issue:

When importing CAD model files into PowerMill, the following error message is being displayed:

PowerMill Error:
Translator Error — Cannot run translation program
Please ensure that Autodesk Manufacturing Data Exchange Utility is installed and that it has been registered correctly.

Causes:

Possible causes;

• AMDEU (Autodesk Manufacturing Data Exchange Utility) is either not installed or not properly registered on the system.
• CAD model being imported is empty. (File is zero bytes).
• CAD Model been imported is a psmodel.

Solution:

To remove the error from PowerMill , try one of the following:

AMDEU is not installed

• Install AMDEU by reinstalling PowerMill. 

AMDEU is already installed

• Execute COM Register Autodesk Manufacturing Data Exchange Utility <version number> as administrator. Note: if COM register the current version doesn’t work , try with a previous version.

See Also:

• Error: «Translator Error — Cannot run translation program. Ensure Autodesk Manufacturing Data Exchange Utility is installed and that it has been registered correctly.» When importing a pvz file into PowerMill
• Error: «Translator Error» during import of Rhino six files into PowerMill

Issue:

Getting translator error — Unknown error when importing XT file into PowerMill 2021.

Causes:

PowerMill is using Autodesk Manufacturing Data Exchange Utility 2021.

Solution:

Need to «Com Register Autodesk Manufacturing Data Exchange Utility 2022» to remove «translator error — Unknown error» when importing XT file into PowerMill 2021.

To COM Register Autodesk Manufacturing Data Exchange Utility (AMDEU):

1. Close PowerMill / PowerShape / FeatureCAM / PowerInspect.
2. Install the latest version of PowerMill / PowerShape / FeatureCAM / PowerInspect. This will install the latest version of AMDEU.
3. Select Windows Programs > Autodesk > Autodesk Manufacturing Data Exchange Utility.
4. Select COM Register Autodesk Manufacturing Data Exchange 20xx > Right click > More > Run as administrator.

NOTE: The selected version of AMDEU will be set as default and used when importing data into PowerMill / PowerShape / FeatureCAM / PowerInspect.

OR

Install PowerMill 2022 which will automatically install Autodesk Manufacturing Data Exchange Utility 2022.

Issue:

Getting translator error — Unknown error when importing XT file into PowerMill 2021.

Causes:

PowerMill is using Autodesk Manufacturing Data Exchange Utility 2021.

Solution:

Need to «Com Register Autodesk Manufacturing Data Exchange Utility 2022» to remove «translator error — Unknown error» when importing XT file into PowerMill 2021.

To COM Register Autodesk Manufacturing Data Exchange Utility (AMDEU):

1. Close PowerMill / PowerShape / FeatureCAM / PowerInspect.
2. Install the latest version of PowerMill / PowerShape / FeatureCAM / PowerInspect. This will install the latest version of AMDEU.
3. Select Windows Programs > Autodesk > Autodesk Manufacturing Data Exchange Utility.
4. Select COM Register Autodesk Manufacturing Data Exchange 20xx > Right click > More > Run as administrator.

NOTE: The selected version of AMDEU will be set as default and used when importing data into PowerMill / PowerShape / FeatureCAM / PowerInspect.

OR

Install PowerMill 2022 which will automatically install Autodesk Manufacturing Data Exchange Utility 2022.