SQL Server 2008 Enterprise SQL Server 2008 Developer SQL Server 2008 Standard SQL Server 2008 Standard Edition for Small Business SQL Server 2008 Workgroup SQL Server 2008 R2 Developer SQL Server 2008 R2 Enterprise SQL Server 2008 R2 Standard SQL Server 2008 R2 Standard Edition for Small Business SQL Server 2008 R2 Workgroup Еще…Меньше
Корпорация Майкрософт распространяет исправления Microsoft SQL Server 2008 в один файл для загрузки. Поскольку исправления являются кумулятивными, каждый новый выпуск содержит все исправления и исправления для системы безопасности, которые были включены в предыдущий выпуск исправлений для SQL Server 2008.Корпорация Майкрософт распространяет исправления Microsoft SQL Server 2008 или SQL Server 2008 R2 как один файл для загрузки. Поскольку исправления являются кумулятивными, каждый новый выпуск содержит все исправления и исправления для системы безопасности, которые были включены в исправленный выпуск SQL Server 2008 или SQL Server 2008 R2.
Проблемы
При запуске программы установки SQL Server 2008 или SQL Server 2008 R2 программа установки может завершить работу со сбоем и произойдет неуправляемое исключение. Кроме того, в журналах настройки регистрируются сообщения об ошибках, похожие на приведенные ниже.
Индекс (Отсчитываемый от нуля) должен быть больше или равен нулю и меньше, чем размер списка аргументов. Код ошибки 0x84B10001.
Примечание. Это исключение не является исходным сообщением об ошибке.
Причина
Эта проблема возникает из-за ошибки в программе установки SQL Server 2008 или SQL Server 2008 R2. Существует множество возможных сценариев, которые могут инициировать эту ошибку. Например, сбой в предыдущей установке SQL Server может повредить реестр, и это повреждение реестра может вызвать эту ошибку.
Решение
Сведения о накопительном пакете обновления
SQL Server 2008 R2
Исправление для этой проблемы впервые выпущено в накопительном обновлении 5. Для получения дополнительных сведений о том, как получить этот накопительный пакет обновления для SQL Server 2008 R2, щелкните следующий номер статьи базы знаний Майкрософт:
2438347 Накопительный пакет обновления 5 для SQL Server 2008 R2 Примечание. Поскольку сборки являются кумулятивными, каждый новый выпуск исправлений содержит все исправления и все исправления безопасности, которые были включены в предыдущий выпуск исправлений для SQL Server 2008 R2. Рекомендуется установить последнюю версию исправления, которая включает это исправление. Дополнительные сведения см. в следующей статье базы знаний Майкрософт:
981356 Сборки SQL Server 2008 R2, выпущенные после выпуска SQL Server 2008 R2
SQL Server 2008 с пакетом обновления 1
Исправление для этой проблемы впервые выпущено в накопительном обновлении 10 для SQL Server 2008 с пакетом обновления 1 (SP1). Чтобы получить дополнительные сведения об этом накопительном пакете обновления, щелкните следующий номер статьи базы знаний Майкрософт:
2279604 Накопительный пакет обновления 10 для SQL Server 2008 с пакетом обновления 1 (SP1)Примечание. Так как сборки являются кумулятивными, каждый новый выпуск исправлений содержит все исправления и все исправления безопасности, которые были включены в предыдущий выпуск исправлений для SQL Server 2008. Корпорация Microsoft рекомендует установить последнюю версию исправления, которая включает это исправление. Дополнительные сведения см. в следующей статье базы знаний Майкрософт:
970365 Сборки SQL Server 2008, выпущенные после выпуска пакета обновления 1 (SP1) для SQL Server 2008 Исправления Microsoft SQL Server 2008 создаются для конкретных пакетов обновления для SQL Server. Вы должны применить исправление для SQL Server 2008 с пакетом обновления 1 (SP1) к установке SQL Server 2008 с пакетом обновления 1. По умолчанию любое исправление, предоставленное в пакете обновления SQL Server, входит в следующий пакет обновления для SQL Server.
SQL Server 2008 с пакетом обновления 2
Исправление для этой проблемы впервые выпущено в накопительном обновлении 1 для SQL Server 2008 с пакетом обновления 2. Чтобы получить дополнительные сведения об этом накопительном пакете обновления, щелкните следующий номер статьи базы знаний Майкрософт:
2289254 Накопительное обновление 1 для SQL Server 2008 с пакетом обновления 2Примечание. Так как сборки являются кумулятивными, каждый новый выпуск исправлений содержит все исправления и все исправления безопасности, которые были включены в предыдущий выпуск исправлений для SQL Server 2008. Рекомендуется установить последнюю версию исправления, которая включает это исправление. Дополнительные сведения см. в следующей статье базы знаний Майкрософт:
2402659 Сборки SQL Server 2008, выпущенные после выпуска пакета обновления 2 (SP2) для SQL Server 2008
Статус
Корпорация Майкрософт подтверждает наличие этой проблемы в своих продуктах, которые перечислены в разделе «Применяется к».
Ссылки
Чтобы получить дополнительные сведения о модели добавочного обслуживания для SQL Server, щелкните следующий номер статьи базы знаний Майкрософт:
935897 Модель обслуживания изменений, используемая рабочей группой SQL Server, предоставляет модель ISM для распространения исправлений обнаруженных проблемЧтобы получить дополнительные сведения о схеме присвоения имен обновлениям SQL Server, щелкните следующий номер статьи базы знаний Майкрософт:
822499Новая схема присвоения имен пакетам обновлений программного обеспечения Microsoft SQL ServerЧтобы получить дополнительные сведения о терминологии обновления программного обеспечения, щелкните следующий номер статьи базы знаний Майкрософт:
824684 Стандартные термины, используемые при описании обновлений программных продуктов Майкрософт
Нужна дополнительная помощь?
Нужны дополнительные параметры?
Изучите преимущества подписки, просмотрите учебные курсы, узнайте, как защитить свое устройство и т. д.
В сообществах можно задавать вопросы и отвечать на них, отправлять отзывы и консультироваться с экспертами разных профилей.
SQL Server 2008 Enterprise SQL Server 2008 Developer SQL Server 2008 Standard SQL Server 2008 Standard Edition for Small Business SQL Server 2008 Workgroup SQL Server 2008 R2 Developer SQL Server 2008 R2 Enterprise SQL Server 2008 R2 Standard SQL Server 2008 R2 Standard Edition for Small Business SQL Server 2008 R2 Workgroup More…Less
Microsoft distributes Microsoft SQL Server 2008 fixes as one downloadable file. Because the fixes are cumulative, each new release contains all the hotfixes and all the security fixes that were included with the previous SQL Server 2008 fix release.Microsoft distributes Microsoft SQL Server 2008 or SQL Server 2008 R2 fixes as one downloadable file. Because the fixes are cumulative, each new release contains all the hotfixes and all the security fixes that were included with the previous SQL Server 2008 or SQL Server 2008 R2 fix release.
Symptoms
When you run SQL Server 2008 Setup or SQL Server 2008 R2, Setup may fail, and an unhandled exception occurs. Additionally, an error message that resembles the following is logged in the setup logs:
Index (zero based) must be greater than or equal to zero and less than the size of the argument list.
Error code 0x84B10001.
Note This exception is not the original error message.
Cause
This issue occurs because of an error in the SQL Server 2008 or SQL Server 2008 R2 Setup program.
There are many possible scenarios that may initiate this issue. For example, a failure of a previous installation of SQL server may corrupt the registry, and this registry corruption may initiate this issue.
Resolution
Cumulative update information
SQL Server 2008 R2
The fix for this issue was first released in Cumulative Update 5. For more information about how to obtain this cumulative update package for SQL Server 2008 R2, click the following article number to view the article in the Microsoft Knowledge Base:
2438347 Cumulative Update package 5 for SQL Server 2008 R2 Note Because the builds are cumulative, each new fix release contains all the hotfixes and all the security fixes that were included with the previous SQL Server 2008 R2 fix release. We recommend that you consider applying the most recent fix release that contains this hotfix. For more information, click the following article number to view the article in the Microsoft Knowledge Base:
981356 The SQL Server 2008 R2 builds that were released after SQL Server 2008 R2 was released
SQL Server 2008 Service Pack 1
The fix for this issue was first released in Cumulative Update 10 for SQL Server 2008 Service Pack 1. For more information about this cumulative update package, click the following article number to view the article in the Microsoft Knowledge Base:
2279604 Cumulative update package 10 for SQL Server 2008 Service Pack 1Note Because the builds are cumulative, each new fix release contains all the hotfixes and all the security fixes that were included with the previous SQL Server 2008 fix release. Microsoft recommends that you consider applying the most recent fix release that contains this hotfix. For more information, click the following article number to view the article in the Microsoft Knowledge Base:
970365 The SQL Server 2008 builds that were released after SQL Server 2008 Service Pack 1 was released Microsoft SQL Server 2008 hotfixes are created for specific SQL Server service packs. You must apply a SQL Server 2008 Service Pack 1 hotfix to an installation of SQL Server 2008 Service Pack 1. By default, any hotfix that is provided in a SQL Server service pack is included in the next SQL Server service pack.
SQL Server 2008 Service Pack 2
The fix for this issue was first released in Cumulative Update 1 for SQL Server 2008 Service Pack 2. For more information about this cumulative update package, click the following article number to view the article in the Microsoft Knowledge Base:
2289254 Cumulative update 1 for SQL Server 2008 Service Pack 2Note Because the builds are cumulative, each new fix release contains all the hotfixes and all the security fixes that were included with the previous SQL Server 2008 fix release. We recommend that you consider applying the most recent fix release that contains this hotfix. For more information, click the following article number to view the article in the Microsoft Knowledge Base:
2402659 The SQL Server 2008 builds that were released after SQL Server 2008 Service Pack 2 was released
Status
Microsoft has confirmed that this is a problem in the Microsoft products that are listed in the «Applies to» section.
References
For more information about the Incremental Servicing Model for SQL Server, click the following article number to view the article in the Microsoft Knowledge Base:
935897 An Incremental Servicing Model is available from the SQL Server team to deliver hotfixes for reported problems
For more information about the naming schema for SQL Server updates, click the following article number to view the article in the Microsoft Knowledge Base:
822499New naming schema for Microsoft SQL Server software update packagesFor more information about software update terminology, click the following article number to view the article in the Microsoft Knowledge Base:
824684 Description of the standard terminology that is used to describe Microsoft software updates
Need more help?
Want more options?
Explore subscription benefits, browse training courses, learn how to secure your device, and more.
Communities help you ask and answer questions, give feedback, and hear from experts with rich knowledge.
- Remove From My Forums
-
Question
-
Hi,
in the sql server installation center I click on «new sql server stand alone installation…» and get this error message.
thank you for your help
-
Edited by
Samuel Lester — MSFTMicrosoft employee
Saturday, August 24, 2013 11:23 AM
Cleaned up format
-
Edited by
All replies
-
Hi, can you try to unpack the Express package and run setup from the command line? This should get around the issue. To do so,
- Uninstall SQL Server setup package from add/remove programs
- Unpack the Express package to a local folder and run setup as admin. To do so, run <package.exe> /x:»c:SQLExpressUnpacked»
- Launch setup.exe from the command line from c:SQLExpressUnpacked using «setup.exe /action=install»
Thanks,
Sam Lester (MSFT)
http://blogs.msdn.com/b/samlester
This posting is provided «AS IS» with no warranties, and confers no rights. Please remember to click
«Mark as Answer» and
«Vote as Helpful» on posts that help you. This can be beneficial to other community members reading the thread.-
Proposed as answer by
Ahmed Ibrahim — MSFTMicrosoft employee
Monday, September 16, 2013 6:48 PM
-
thank you for yor reply!
there is no sql setup packge or anything like that on the add/remove programs.
beside that I don’t understand the other two bullets below
thank you
-
No problem. SQL Server Express edition ships as a downloadable .exe file which unpacks and runs setup.exe when you launch it. We’re going to «unpack» the shipped .exe to access the folder structure directly, then run the setup.exe file from inside.
To do so:Step 1: uninstall any existing SQL Server Express bits (not needed since you don’t have any in A/R Programs)
Step 2: Depending on your package that you downloaded (32-bit, 64-bit, etc.), you’ll run the following from the command line (run as administrator).
SQLEXPR_x64_ENU.exe /x:»c:SQLExpressUnpacked»
(where c:SQLExpressUnpacked is a folder that you’ve created to put the temporary install files)Step 3: From the cmd prompt, navigate to c:SQLExpressUnpacked and run «setup.exe
/action=install»This will launch SQL Server Express setup directly and should get you around the issue.
Thanks,
Sam Lester (MSFT)
http://blogs.msdn.com/b/samlester
This posting is provided «AS IS» with no warranties, and confers no rights. Please remember to click
«Mark as Answer» and
«Vote as Helpful» on posts that help you. This can be beneficial to other community members reading the thread. -
thank you again
setup.exe is not working.
the command is not recognized as an internal or external command
-
-
Proposed as answer by
David.Garcia.Herrero
Thursday, April 21, 2016 4:13 PM
-
Proposed as answer by
-
the command is not recognized as an internal or external command
This error is typically the result of running the command line from the wrong path. Were you able to unpack the files to a folder somewhere on your machine? If so, were you able to navigate from the cmd prompt to that folder and run setup.exe?
You can also try to navigate to that folder and double click the setup.exe program to install through the UI. Both should work for you.Thanks,
Sam Lester (MSFT)
http://blogs.msdn.com/b/samlester
This posting is provided «AS IS» with no warranties, and confers no rights. Please remember to click
«Mark as Answer» and
«Vote as Helpful» on posts that help you. This can be beneficial to other community members reading the thread. -
thank, I try uninstall MSDE from my PC is succesed.
-
the best way to solve it is going into 110 flooder, rename Boostrap floder like Boostrap1, install package SQL 2012 server restart and enjoy!
C:Program filesMicrosoft SQL Server110Boostrap
hope this help you, one more thing to make this better just after rename flooder Boopstrap clean registre then install again
Best Regards
Nuvatus
- Remove From My Forums
-
Вопрос
-
Hi All,
I am having problems installing MSSQL 2012 Express (32 and 64 bit). I have tried the advance edition, the express edition with tools and the management studio both 32 bit and 64 bit versions without success. I get the following error..
TITLE: SQL Server Setup failure.
——————————SQL Server Setup has encountered the following error:
‘.’, hexadecimal value 0x00, is an invalid character. Line 1, position 120352. Error code 0x84B10001.
I have searched the web for answers and found that this error has been reported a few times now……but I could not find the answer.
If there is a solution please advise.
Thanks. Chris.
Ответы
-
can you try the following
1-un install SQL setup package from addremove programs and try again
2-decompress express package to local folder run as administrator <package.exe /x:»d:SQLExpress2012Uncompressed»
the launch setup.exe from command line from d:SQLExpress2012Uncompressed and run
setup.exe /action=install, if this doesn’t wrok please see below FAQ on how to share/upload comple SQL Server setup logs
FAQ
—-
Regards,
Ahmed Ibrahim
SQL Server Setup Team
My Blog
This posting is provided «AS IS» with no warranties, and confers no rights. Please remember to click
«Mark as Answer» and «Vote as Helpful»
on posts that help you.
This can be beneficial to other community members reading the thread.
-
Помечено в качестве ответа
7 ноября 2012 г. 9:47
-
Помечено в качестве ответа
-
Hi All,
Thank you for your advice, this worked.
This is what I did…..
I extracted the ‘SQLEXPRADV_x64_ENU’ to its own local directory. I changed to this new directory and right clicked on ‘setup.exe’ and then selected to run this as an administrator.
It installed without any errors … took about an hour.
Thanks once again Ahmed.
Regards.
Chris van Nispen-
Помечено в качестве ответа
Chris van Nispen
13 ноября 2012 г. 11:59
-
Помечено в качестве ответа
-
-
Помечено в качестве ответа
Shulei Chen
7 ноября 2012 г. 9:47
-
Помечено в качестве ответа
-
Hello,
This may be related to an MSDE instance installed on that computer. Please use the following article to remove the instance and try to install SQL Server 2012 again.
http://support.microsoft.com/kb/320873
Hope this helps.Regards,
Alberto Morillo
SQLCoffee.com
-
Помечено в качестве ответа
Shulei Chen
7 ноября 2012 г. 9:47
-
Помечено в качестве ответа
SQL Server Setup has encountered the following error:
There was an error generating the XML document.
Error code 0x84B10001.
This issue occurs when SQL Server(2008, 2012, 2014, 2016, 2017) Setup fails.
Cause of this Error:
There are many possible scenarios that may initiate this issue. For example, a failure of a previous installation of SQL server may corrupt the registry, and this registry corruption may initiate this issue.
Solution-1:
From Control Panel, uninstall existing Microsoft SQL Server Setup installation and start again with fresh installation.
Solution-2:
1. Create a new windows user on your machine and add this user to local Administrator group.
2. Log in with new user and start the SQL Server installation again.